April 2019 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Mon Apr 1 00:04:11 UTC 2019
Ending: Tue Apr 30 15:17:10 UTC 2019
Messages: 179

• [Bug 236920] Bad asm constraints in arm64 byte swap functions   bugzilla-noreply at freebsd.org
• network booting allwinner(nanopi)   Daniel Braniss
• Help getting Marvell-A388 SBC booted   Peter Ankerstål
• Can't boot 12.0-RELEASE on Raspberry Pi 3 B+   Sergey Matveychuk
• Can't boot 12.0-RELEASE on Raspberry Pi 3 B+   Warner Losh
• Can't boot 12.0-RELEASE on Raspberry Pi 3 B+   Sergey Matveychuk
• RPI3, error: invalid operand in inline asm: 'rev16 ${0:w}, ${1:w}'   bob prohaska
• RPI3, error: invalid operand in inline asm: 'rev16 ${0:w}, ${1:w}'   John F Carr
• Help getting Marvell-A388 SBC booted   Marcin Wojtas
• Help getting Marvell-A388 SBC booted   Peter Ankerstål
• Help getting Marvell-A388 SBC booted   Marcin Wojtas
• Help getting Marvell-A388 SBC booted   Peter Ankerstål
• RPI3, error: invalid operand in inline asm: 'rev16 ${0:w}, ${1:w}'   bob prohaska
• Help getting Marvell-A388 SBC booted   Peter Ankerstål
• Help getting Marvell-A388 SBC booted   Ian Lepore
• RPI3, error: invalid operand in inline asm: 'rev16 ${0:w}, ${1:w}'   bob prohaska
• Help getting Marvell-A388 SBC booted   Josua Mayer
• Help getting Marvell-A388 SBC booted   Russell Haley
• Help getting Marvell-A388 SBC booted   Peter Ankerstål
• Help getting Marvell-A388 SBC booted   Peter Ankerstål
• RPI3, error: invalid operand in inline asm: 'rev16 ${0:w}, ${1:w}'   John F Carr
• RPI3, error: invalid operand in inline asm: 'rev16 ${0:w}, ${1:w}'   bob prohaska
• insanely-high interrupt rates   Ian Lepore
• PLASTIC TURNOVER BOX(EU BOX)[EU4316] Grace Lin   Grace Lin
• network booting allwinner(nanopi)   Ian Lepore
• network booting allwinner(nanopi)   Daniel Braniss
• insanely-high interrupt rates   Andrew Gierth
• insanely-high interrupt rates   Rodney W. Grimes
• network booting allwinner(nanopi)   Rodney W. Grimes
• network booting allwinner(nanopi)   Daniel Braniss
• network booting allwinner(nanopi)   Rodney W. Grimes
• Restore broken ThunderX support in 12 by MFCing r343764?   Ed Maste
• insanely-high interrupt rates   Andrew Gierth
• SFP port on ClearFog base   Peter Ankerstål
• [Bug 236624] Beaglebone Black: cpsw device does not load on FreeBSD 13.0-CURRENT   bugzilla-noreply at freebsd.org
• Restore broken ThunderX support in 12 by MFCing r343764?   Marcel Flores
• EC2 ARM64 AMIs   Colin Percival
• EC2 ARM64 AMIs   Ronald Klop
• Restore broken ThunderX support in 12 by MFCing r343764?   Marcel Flores
• /bin/sh: java: not found when compiling www/chromium on RPI3   bob prohaska
• /bin/sh: java: not found when compiling www/chromium on RPI3   Jan Beich
• [Bug 237055] Ampere eMAG compatibility   bugzilla-noreply at freebsd.org
• /bin/sh: java: not found when compiling www/chromium on RPI3   bob prohaska
• Restore broken ThunderX support in 12 by MFCing r343764?   Marcel Flores
• [Bug 237072] netgraph(4): performance issue?   bugzilla-noreply at freebsd.org
• [Bug 237078] generic_timer not handling interrupts properly   bugzilla-noreply at freebsd.org
• Which kernel for GoFlex Home?   Balanga Bar
• [Bug 237085] boot.scr file missing from Raspberry Pi rpi-b images preventing booting   bugzilla-noreply at freebsd.org
• Can't install FreeBSD version 12 on aarch64 eMAG   Tinh Nguyen
• Can't install FreeBSD version 12 on aarch64 eMAG   Tinh Nguyen
• i2c still not working for me   Daniel Braniss
• i2c still not working for me   Emmanuel Vadot
• i2c still not working for me   Daniel Braniss
• i2c still not working for me   Emmanuel Vadot
• i2c still not working for me   Daniel Braniss
• insanely-high interrupt rates   Karl Denninger
• Microsoft SharePoint Users Contact List   Meghan Hudson
• i2c still not working for me   Oleksandr Tymoshenko
• no dev.cpu on RPI-B   Bernd Walter
• no dev.cpu on RPI-B   Peter Jeremy
• insanely-high interrupt rates   Ian Lepore
• no dev.cpu on RPI-B   Bernd Walter
• no dev.cpu on RPI-B   Ian Lepore
• no dev.cpu on RPI-B   Bernd Walter
• no dev.cpu on RPI-B   Kyle Evans
• Marvell Kirkwood - anyone?   Balanga Bar
• i2c still not working for me   Daniel Braniss
• A10 is not stable at CURRENT   Mori Hiroki
• Marvell Kirkwood - anyone?   Ian Lepore
• [Solved] A10 is not stable at CURRENT   Mori Hiroki
• i2c almost working for me, was Re: i2c still not working for me   Daniel Braniss
• section .note.gnu.build-id at kernel   Mori Hiroki
• about netbooting on armv6   peter.blok at bsd4all.org
• about netbooting on armv6   peter.blok at bsd4all.org
• Can't install FreeBSD version 12 on aarch64 eMAG   Greg V
• espressobin board   Kim Shrier
• no dev.cpu on RPI-B   Bernd Walter
• espressobin board   Marcin Wojtas
• espressobin board   Kim Shrier
• Enabling the network ports on the MacchiatoBIN (Double Shot)   Rebecca Cran
• Enabling the network ports on the MacchiatoBIN (Double Shot)   Marcin Wojtas
• Enabling the network ports on the MacchiatoBIN (Double Shot)   Rebecca Cran
• Marvell Kirkwood - anyone?   Balanga Bar
• Can't install FreeBSD version 12 on aarch64 eMAG   Ed Maste
• Marvell Kirkwood - anyone?   Mori Hiroki
• i2c almost working for me, was Re: i2c still not working for me   Daniel Braniss
• no dev.cpu on RPI-B   Peter Jeremy
• Kernel panic help   Balanga Bar
• ubldr   Balanga Bar
• Marvell Kirkwood - anyone?   Ian Lepore
• Marvell Kirkwood - anyone?   Balanga Bar
• ubldr   Hyun Hwang
• ubldr   Balanga Bar
• Enabling the network ports on the MacchiatoBIN (Double Shot)   Aurélien DARRAGON
• Marvell Kirkwood - anyone?   Ian Lepore
• ubldr   Ian Lepore
• Enabling the network ports on the MacchiatoBIN (Double Shot)   Marcin Wojtas
• interrupt storm detected   Balanga Bar
• interrupt storm detected   Ian Lepore
• Enabling the network ports on the MacchiatoBIN (Double Shot)   Aurélien DARRAGON
• insanely-high interrupt rates -- PARTIAL resolution (Pi2)   Karl Denninger
• Marvell Kirkwood - anyone?   Balanga Bar
• i2c almost working for me, was Re: i2c still not working for me   Emmanuel Vadot
• ubldr   Balanga Bar
• loaderdev   Balanga Bar
• loaderdev   Ian Lepore
• Marvell Kirkwood - anyone?   Ian Lepore
• Enabling the network ports on the MacchiatoBIN (Double Shot)   Marcin Wojtas
• i2c almost working for me, was Re: i2c still not working for me   Daniel Braniss
• loaderdev   Balanga Bar
• Activating RPi 3B+ network port LED's   Ralf Wenk
• interrupt storm detected   Balanga Bar
• booting head on orange-zero panics   Daniel Braniss
• Enabling the network ports on the MacchiatoBIN (Double Shot)   Aurélien DARRAGON
• booting head on orange-zero panics   Emmanuel Vadot
• i2c almost working for me, was Re: i2c still not working for me   Ian Lepore
• loaderdev   Ian Lepore
• I2c producing crazy console messages [[Re: insanely-high interrupt rates -- PARTIAL resolution (Pi2)]]   Karl Denninger
• I2c producing crazy console messages [[Re: insanely-high interrupt rates -- PARTIAL resolution (Pi2)]]   Ian Lepore
• I2c producing crazy console messages [[Re: insanely-high interrupt rates -- PARTIAL resolution (Pi2)]]   karl at denninger.net
• I2c producing crazy console messages [[Re: insanely-high interrupt rates -- PARTIAL resolution (Pi2)]]   Ian Lepore
• I2c producing crazy console messages [[Re: insanely-high interrupt rates -- PARTIAL resolution (Pi2)]]   Ian Lepore
• I2c producing crazy console messages [[Re: insanely-high interrupt rates -- PARTIAL resolution (Pi2)]]   Karl Denninger
• i2c almost working for me, was Re: i2c still not working for me   Daniel Braniss
• i2c almost working for me, was Re: i2c still not working for me   Emmanuel Vadot
• i2c almost working for me, was Re: i2c still not working for me   Daniel Braniss
• I2c producing crazy console messages [[Re: insanely-high interrupt rates -- PARTIAL resolution (Pi2)]]   Per Hedeland
• I2c producing crazy console messages [[Re: insanely-high interrupt rates -- PARTIAL resolution (Pi2)]]   Karl Denninger
• I2c producing crazy console messages [[Re: insanely-high interrupt rates -- PARTIAL resolution (Pi2)]]   Per Hedeland
• i2c almost working for me, was Re: i2c still not working for me   Ian Lepore
• I2c producing crazy console messages [[Re: insanely-high interrupt rates -- PARTIAL resolution (Pi2)]]   Ian Lepore
• [Bug 237401] A10 pin control define bug   bugzilla-noreply at freebsd.org
• loaderdev   Balanga Bar
• I2c producing crazy console messages [[Re: insanely-high interrupt rates -- PARTIAL resolution (Pi2)]]   Per Hedeland
• I2c producing crazy console messages [[Re: insanely-high interrupt rates -- PARTIAL resolution (Pi2)]]   Ian Lepore
• [Bug 237435] [aarch64][KASSERT] panic: pmap_demote_l2: Invalid virtual address - in sys_mprotect while building lang/sbcl with lang/clisp   bugzilla-noreply at freebsd.org
• no dev.cpu on RPI-B   Bernd Walter
• insanely-high interrupt rates -- PARTIAL resolution (Pi2)   Ian Lepore
• insanely-high interrupt rates -- PARTIAL resolution (Pi2)   Karl Denninger
• insanely-high interrupt rates -- PARTIAL resolution (Pi2)   Warner Losh
• insanely-high interrupt rates -- PARTIAL resolution (Pi2)   Ian Lepore
• Installing pkgs on armv5   Balanga Bar
• Installing pkgs on armv5   Ronald Klop
• [Bug 237466] remove fslsdma device from arm GENERIC file   bugzilla-noreply at freebsd.org
• Installing pkgs on armv5   Jonathan Chen
• Marvell Kirkwood - anyone?   Balanga Bar
• Marvell Kirkwood - anyone?   Mark Linimon
• Marvell Kirkwood - anyone?   Balanga Bar
• Marvell Kirkwood - anyone?   Mark Linimon
• Marvell Kirkwood - anyone?   Balanga Bar
• Marvell Kirkwood - anyone?   Rodney W. Grimes
• Marvell Kirkwood - anyone?   Balanga Bar
• Marvell Kirkwood - anyone?   Rodney W. Grimes
• Marvell Kirkwood - anyone?   Mark Linimon
• Marvell Kirkwood - anyone?   Mark Linimon
• No subject   NOOB ovich
• Marvell Kirkwood - anyone?   Ronald Klop
• I2C on Allwinner NanoPI Neo2   Manuel Stühn
• I2C on Allwinner NanoPI Neo2   Emmanuel Vadot
• i2c almost working for me, was Re: i2c still not working for me   Emmanuel Vadot
• i2c almost working for me, was Re: i2c still not working for me   Emmanuel Vadot
• i2c almost working for me, was Re: i2c still not working for me   Daniel Braniss
• Build of FreeBSD-ARM for EspressoBIN   Brett Glass
• i2c almost working for me, was Re: i2c still not working for me   Daniel Braniss
• Marvell Kirkwood - anyone?   Balanga Bar
• i2c almost working for me, was Re: i2c still not working for me   Emmanuel Vadot
• i2c almost working for me, was Re: i2c still not working for me   Daniel Braniss
• Marvell Kirkwood - anyone?   Ronald Klop
• [Bug 236639] Beaglebone Black: Misaligned cache warning until kernel is loaded (FreeBSD 13.0-CURRENT)   bugzilla-noreply at freebsd.org
• loaderdev   Balanga Bar
• [Bug 237571] regression with commit r344894 for H5 based Allwinners   bugzilla-noreply at freebsd.org
• Marvell Kirkwood - anyone?   Balanga Bar
• Marvell Kirkwood - anyone?   Paul Mather
• [Bug 234091] rpi 2b start with hight load, interrupts may be blamed   bugzilla-noreply at freebsd.org
• [Bug 237401] A10 pin control define bug   bugzilla-noreply at freebsd.org
• Marvell Kirkwood - anyone?   Warner Losh
• 13-CURRENT on Gigabyte ThunderX system: "pci_host_generic_core_alloc_resource FAIL" and "bgx0: Could not find matching PHY"   Rebecca Cran
• Marvell Kirkwood - anyone?   Balanga Bar
• Marvell Kirkwood - anyone?   Warner Losh

Last message date: Tue Apr 30 15:17:10 UTC 2019
Archived on: Tue Apr 30 15:17:12 UTC 2019

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...