October 2010 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sat Oct 2 08:20:04 UTC 2010
Ending: Sun Oct 31 20:29:17 UTC 2010
Messages: 65

• kern/150936: commit references a PR   dfilter service
• Current problem reports assigned to freebsd-scsi@FreeBSD.org   FreeBSD bugmaster
• camcontrol patch to allow users to specify device node names   Bruce Cran
• [HEADSUP] changes to cam_get_device() and cam_open_device()   Andriy Gapon
  • [HEADSUP] changes to cam_get_device() and cam_open_device()   Bruce Cran
    • [HEADSUP] changes to cam_get_device() and cam_open_device()   Matthew Jacob
      • [HEADSUP] changes to cam_get_device() and cam_open_device()   Andriy Gapon
    • [HEADSUP] changes to cam_get_device() and cam_open_device()   Andriy Gapon
      • [HEADSUP] changes to cam_get_device() and cam_open_device()   Andriy Gapon
        • [HEADSUP] changes to cam_get_device() and cam_open_device()   Matthew Jacob
          • [HEADSUP] changes to cam_get_device() and cam_open_device()   Andriy Gapon
            • [HEADSUP] changes to cam_get_device() and cam_open_device()   Matthew Jacob
  • [HEADSUP] changes to cam_get_device() and cam_open_device()   Bob Bishop
    • [HEADSUP] changes to cam_get_device() and cam_open_device()   Greg Rivers
• docs/151336: Missing documentation of scsi_ and ata_ functions in libcam   brucec at FreeBSD.org
• Vitesse VSC7250 (Promise EX6850) SAS/SATA controller unsupported in 8?   Bill Desjardins
• Current problem reports assigned to freebsd-scsi@FreeBSD.org   FreeBSD bugmaster
• mfi "unexpected sense" when using mfip/smartctl   Kevin Day
  • mfi "unexpected sense" when using mfip/smartctl   Scott Long
    • mfi "unexpected sense" when using mfip/smartctl   Kevin Day
• kern/130735: [cam] [patch] pass M_NOWAIT to the malloc() call inside cdreaddvdstructure()   jh at FreeBSD.org
• [amr] LSI Megaraid 320-2X U320 only reports U160   Bill Desjardins
  • [amr] LSI Megaraid 320-2X U320 only reports U160   Scott Long
• don't forget the open source storage summit 25th -27th SF bay area   Julian Elischer
• kern/150936: commit references a PR   dfilter service
• kern/150936: [ciss] [patch] Write possibility of the RAID1 level   kib at FreeBSD.org
• Current problem reports assigned to freebsd-scsi@FreeBSD.org   FreeBSD bugmaster
• set kern.cam.scsi_delay to 2000ms on all platforms   Alexander Best
  • set kern.cam.scsi_delay to 2000ms on all platforms   Alexander Best
  • set kern.cam.scsi_delay to 2000ms on all platforms   Scott Long
    • set kern.cam.scsi_delay to 2000ms on all platforms   Alexander Best
      • set kern.cam.scsi_delay to 2000ms on all platforms   Scott Long
        • set kern.cam.scsi_delay to 2000ms on all platforms   Alexander Best
          • set kern.cam.scsi_delay to 2000ms on all platforms   Matthew Jacob
            • set kern.cam.scsi_delay to 2000ms on all platforms   Scott Long
            • set kern.cam.scsi_delay to 2000ms on all platforms   Matthew Jacob
• Summary: Re: Spin down HDD after disk sync or before power off   Bruce Cran
  • Summary: Re: Spin down HDD after disk sync or before power off   Oliver Fromme
  • Summary: Re: Spin down HDD after disk sync or before power off   Alexander Motin
• Summary: Re: Spin down HDD after disk sync or before power off   Alexander Motin
  • Summary: Re: Spin down HDD after disk sync or before power off   Tijl Coosemans
    • Summary: Re: Spin down HDD after disk sync or before power off   Alexander Motin
• Current problem reports assigned to freebsd-scsi@FreeBSD.org   FreeBSD bugmaster
• [Patch] camcontrol - determine the defect list length   Mark Johnston
  • [Patch] camcontrol - determine the defect list length   Scott Long
    • [Patch] camcontrol - determine the defect list length   Mark Johnston
  • Tyan S4881/SCSI/FreeBSD 7.x   Michael L. Squires
• camcontrol rescan all fails if there is no bus 0   Ryan Stone
  • camcontrol rescan all fails if there is no bus 0   Scott Long
    • camcontrol rescan all fails if there is no bus 0   Ed Maste
      • camcontrol rescan all fails if there is no bus 0   Scott Long
        • camcontrol rescan all fails if there is no bus 0   Ryan Stone
        • camcontrol rescan all fails if there is no bus 0   Ed Maste
          • camcontrol rescan all fails if there is no bus 0   Scott Long
          • camcontrol rescan all fails if there is no bus 0   Andriy Gapon
            • camcontrol rescan all fails if there is no bus 0   Ed Maste
  • camcontrol rescan all fails if there is no bus 0   Andriy Gapon
• Problems getting target mode to work with isp driver   Penta Upa
  • Problems getting target mode to work with isp driver   Matthew Jacob
    • Problems getting target mode to work with isp driver   Matthew Jacob
      • Problems getting target mode to work with isp driver   Penta Upa
        • Problems getting target mode to work with isp driver   Matthew Jacob
          • Problems getting target mode to work with isp driver   Penta Upa
• Fwd: Fwd: sg3_utils, sdparm and ddpt   Matthew Jacob
• bin/57088: [cam] [patch] for a possible fd leak in libcam.c   arundel at FreeBSD.org

Last message date: Sun Oct 31 20:29:17 UTC 2010
Archived on: Sun Oct 31 20:29:20 UTC 2010

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...