HP nx9005 and Netgear WG511T

[M. Warner Losh]

In message: <20050820162324.GF34551 at voodoo.oberon.net>
            Kirill Ponomarew <krion at voodoo.oberon.net> writes:
: On Sat, Aug 20, 2005 at 06:10:31PM +0200, Dylan Wylie wrote:
: > >You're able to run it on HP Compaq nx9005 ?
: > Older compaq's; one pressario1600 and a E500
: > >
: > >I'm afraid there is something more broken than ath driver.  After
: > >unplugging the card, I'm also getting on console:
: > >
: > >ath0: ath_reset: unable to reset hardware; hal status 3229953940
: > >ath0: hardware error; resetting
: > >ath0: ath_chan_set: unable to reset channel 6 (2437 Mhz)
: > >ath0: ath_reset: unable to reset hardware; hal status 3229953940
: > >ath0: detached
: > >
: > >-Kirill
: > >
: > So,what cardbus hardware for an nx9005?
: > for presario 1600 it's:
: > cbb0: <TI1211 PCI-CardBus Bridge> at device 10.0 on pci0
: > cardbus0: <CardBus bus> on cbb0
: > pccard0: <16-bit PCCard bus> on cbb0
: 
: cbb0: <O2Micro OZ6933 PCI-CardBus Bridge> mem 0x80000000-0x80000fff irq 11 at device 10.0 on pci0
: cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80000000
: cardbus0: <CardBus bus> on cbb0
: pccard0: <16-bit PCCard bus> on cbb0
: 
: cbb1: <O2Micro OZ6933 PCI-CardBus Bridge> at device 10.1 on pci0
: cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000
: cardbus1: <CardBus bus> on cbb1
: pccard1: <16-bit PCCard bus> on cbb1
: pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.ISA_.LNKF:0)
: pcib0: slot 10 INTA routed to irq 11 via \\_SB_.PCI0.ISA_.LNKF
: cbb1: [MPSAFE]
: 
: > I am still curious if you can get the card to work on _any_ other machine?
: 
: Yes, the card works perfect on all another machines.
: 
: > The messages on uplugging would't realy worry me actually; it does
: > detach eventualy. Could be wrong though.  Perhaps some-one else
: > can enlighten us on the ghz stuff: does it have any 'real' value,
: > or is it just some hardware string?

Please send me the full dmesg output.  It may be a cbb problem.

Warner