HP nx9005 and Netgear WG511T
Kirill Ponomarew
krion at voodoo.oberon.net
Thu Aug 25 05:21:43 GMT 2005
On Wed, Aug 24, 2005 at 08:33:22PM -0600, M. Warner Losh wrote:
> : Yes, the card works perfect on all another machines.
> :
> : > The messages on uplugging would't realy worry me actually; it does
> : > detach eventualy. Could be wrong though. Perhaps some-one else
> : > can enlighten us on the ghz stuff: does it have any 'real' value,
> : > or is it just some hardware string?
>
> Please send me the full dmesg output. It may be a cbb problem.
Attached.
-Kirill
-------------- next part --------------
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00
00 01 ff 03 00 01 0a 01 00 01 20 01 00 01 25 01
00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01
94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01
VESA: 60 mode(s) found
VESA: v2.0, 65472k memory, flags:0x1, mode table:0xc0742702 (1000022)
VESA: ATI CABO
VESA: ATI Technologies Inc. U1 01.00
null: <null device, zero device>
nfslock: pseudo-device
random: <entropy source, Software, Yarrow>
ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
ACPI-0377: *** Info: Table [SSDT] replaced by host OS
ACPI: overriding DSDT/SSDT with custom table
ACPI-0377: *** Info: Table [DSDT] replaced by host OS
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80012814
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=cab01002)
pcibios: BIOS version 2.10
Found $PIR table, 11 entries at 0xc00fdf10
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 13 1 5 A 0x01 3 4 6 9 10
embedded 0 2 A 0x09 3 4 6 9 10
embedded 0 15 A 0x05 3 4 6 9 10
embedded 0 8 A 0x07 3 4 6 9 10
embedded 0 6 A 0x08 5 7
embedded 0 9 A 0x04 3 4 6 9 10
embedded 0 9 B 0x03 3 4 6 9 10
embedded 0 10 A 0x06 7 11
embedded 0 10 B 0x06 7 11
embedded 0 18 A 0x02 7 11
embedded 0 12 A 0x03 3 4 6 9 10
AcpiOsDerivePciId: bus 0 dev 7 func 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 0 func 0
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 6 10
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 6 10
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 10
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 7 11
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 7 11
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 7 11
pci_link2: <ACPI PCI Link LNKC> irq 9 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 6 10
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 6 10
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 10
pci_link3: <ACPI PCI Link LNKD> on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 10
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 10
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 10
pci_link4: <ACPI PCI Link LNKE> on acpi0
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 10
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 10
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 10
pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 7 11
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 7 11
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 7 11
pci_link6: <ACPI PCI Link LNKG> irq 3 on acpi0
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 6 10
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 6 10
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 10
pci_link7: <ACPI PCI Link LNKH> irq 5 on acpi0
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 7
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 7
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7
pci_link8: <ACPI PCI Link LNKU> irq 9 on acpi0
pci_link8: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 6 10
pci_link8: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 6 10
pci_link8: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 10
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
acpi_ec0: info: new max delay is 20 us
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi_ec0: info: new max delay is 70 us
acpi_ec0: info: new max delay is 100 us
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/1 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K7> on cpu0
powernow0: STATUS: 0xb0b0b00150615
powernow0: STATUS: maxfid: 0x15
powernow0: STATUS: startvid: 0x0b
powernow: 0 1782000kHz FID 15 VID 0b
powernow: 1 1452000kHz FID 00 VID 0d
powernow: 2 1056000kHz FID 0a VID 13
powernow: 3 792000kHz FID 06 VID 13
powernow: 4 660000kHz FID 04 VID 13
powernow: 5 528000kHz FID 12 VID 13
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1002, dev=0xcab0, revid=0x13
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base d4000000, size 26, enabled
map[14]: type 3, range 32, base d0500000, size 12, enabled
map[18]: type 4, range 32, base 00008090, size 2, port disabled
found-> vendor=0x1002, dev=0x700f, revid=0x01
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10b9, dev=0x5237, revid=0x03
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base d0004000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.ISA_.LNKU:0)
pcib0: slot 2 INTA routed to irq 9 via \\_SB_.PCI0.ISA_.LNKU
found-> vendor=0x10b9, dev=0x5451, revid=0x02
bus=0, slot=6, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0xc290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00008400, size 8, enabled
map[14]: type 1, range 32, base d0005000, size 12, enabled
pcib0: matched entry for 0.6.INTA (src \\_SB_.PCI0.ISA_.LNKH:0)
pcib0: slot 6 INTA routed to irq 5 via \\_SB_.PCI0.ISA_.LNKH
found-> vendor=0x10b9, dev=0x1533, revid=0x00
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D3 current D0
found-> vendor=0x10b9, dev=0x5457, revid=0x00
bus=0, slot=8, func=0
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base d0006000, size 12, enabled
map[14]: type 4, range 32, base 00008800, size 8, enabled
pcib0: matched entry for 0.8.INTA (src \\_SB_.PCI0.ISA_.LNKG:0)
pcib0: slot 8 INTA routed to irq 3 via \\_SB_.PCI0.ISA_.LNKG
found-> vendor=0x1217, dev=0x6933, revid=0x01
bus=0, slot=10, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 80000000, size 12, enabled
pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.ISA_.LNKF:0)
pcib0: slot 10 INTA routed to irq 11 via \\_SB_.PCI0.ISA_.LNKF
found-> vendor=0x1217, dev=0x6933, revid=0x01
bus=0, slot=10, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base d0008000, size 12, enabled
pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.ISA_.LNKF:0)
pcib0: slot 10 INTA routed to irq 11 via \\_SB_.PCI0.ISA_.LNKF
found-> vendor=0x104c, dev=0x8026, revid=0x00
bus=0, slot=12, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0012, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base d0009000, size 11, enabled
map[14]: type 1, range 32, base d0000000, size 14, enabled
pcib0: matched entry for 0.12.INTA (src \\_SB_.PCI0.ISA_.LNKC:0)
pcib0: slot 12 INTA routed to irq 9 via \\_SB_.PCI0.ISA_.LNKC
found-> vendor=0x10b9, dev=0x5229, revid=0xc4
bus=0, slot=16, func=0
class=01-01-b0, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00008080, size 4, enabled
found-> vendor=0x10b9, dev=0x7101, revid=0x00
bus=0, slot=17, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x100b, dev=0x0020, revid=0x00
bus=0, slot=18, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x5a (2700 ns), mingnt=0x0b (2750 ns), maxlat=0x34 (13000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00008c00, size 8, enabled
map[14]: type 1, range 32, base d000a000, size 12, enabled
pcib0: matched entry for 0.18.INTA (src \\_SB_.PCI0.ISA_.LNKB:0)
pcib0: slot 18 INTA routed to irq 11 via \\_SB_.PCI0.ISA_.LNKB
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0xd0100000-0xd01fffff
pcib1: prefetched decode 0xe0000000-0xefffffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x4336, revid=0x00
bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0287, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base e0000000, size 28, enabled
pcib1: (null) requested memory range 0xe0000000-0xefffffff: good
map[14]: type 4, range 32, base 00009000, size 8, enabled
pcib1: (null) requested I/O range 0x9000-0x90ff: in range
map[18]: type 1, range 32, base d0100000, size 16, enabled
pcib1: (null) requested memory range 0xd0100000-0xd010ffff: good
pcib1: matched entry for 1.5.INTA (src \\_SB_.PCI0.ISA_.LNKC:0)
pcib1: slot 5 INTA routed to irq 9 via \\_SB_.PCI0.ISA_.LNKC
pci1: <display, VGA> at device 5.0 (no driver attached)
pci0: <serial bus, USB> at device 2.0 (no driver attached)
pci0:2:0: Transition from D0 to D3
pcm0: <Acer Labs M5451> port 0x8400-0x84ff mem 0xd0005000-0xd0005fff irq 5 at device 6.0 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8400
pcm0: <Conexant CX20468 AC97 Codec (id = 0x43585429)>
pcm0: Codec features reserved, headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, AMAP
pcm0: ac97 codec dac ready count: 0
pcm0: [GIANT-LOCKED]
pcm0: sndbuf_setmap 178000, 1000; 0xc1484000 -> 178000
pcm0: sndbuf_setmap 176000, 1000; 0xc1482000 -> 176000
pcm0: sndbuf_setmap 201000, 1000; 0xc14cd000 -> 201000
pcm0: sndbuf_setmap 1ff000, 1000; 0xc14cb000 -> 1ff000
pcm0: sndbuf_setmap 1dd000, 1000; 0xc14c9000 -> 1dd000
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <simple comms, generic modem> at device 8.0 (no driver attached)
pci0:8:0: Transition from D0 to D3
cbb0: <O2Micro OZ6933 PCI-CardBus Bridge> mem 0x80000000-0x80000fff irq 11 at device 10.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x69331217 0x04100007 0x06070001 0x00822000
0x10: 0x80000000 0x020000a0 0x20030200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd
0x30: 0x00000001 0x0000fffd 0x00000001 0x0400010b
0x40: 0x00026933 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x08008200 0x82420bea 0x20500000 0x00000000
0xa0: 0xfe020001 0x10c04100 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <O2Micro OZ6933 PCI-CardBus Bridge> mem 0xd0008000-0xd0008fff irq 11 at device 10.1 on pci0
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0008000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0x69331217 0x04100007 0x06070001 0x00824000
0x10: 0xd0008000 0x220000a0 0x20030300 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd
0x30: 0x00000001 0x0000fffd 0x00000001 0x0440010b
0x40: 0x00026933 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x08008200 0x82420bea 0x20500000 0x00000000
0xa0: 0xfe020001 0x10c04000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci0: <serial bus, FireWire> at device 12.0 (no driver attached)
pci0:12:0: Transition from D0 to D3
atapci0: <AcerLabs M5229 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8080-0x808f at device 16.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8080
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x01 err=0x04 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <bridge> at device 17.0 (no driver attached)
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x8c00-0x8cff mem 0xd000a000-0xd000afff irq 11 at device 18.0 on pci0
sis0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8c00
sis0: Silicon Revision: DP83816A
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x080017, model 0x0002, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: bpf attached
sis0: Ethernet address: 00:0d:9d:5b:0c:cf
sis0: [MPSAFE]
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 0 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
sio0: irq maps: 0x201 0x211 0x201 0x201
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcf7ff,0xdb000-0xdbfff,0xdc000-0xdffff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x201 0x201 0x201 0x201
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1788938139 Hz quality 800
Timecounters tick every 1.000 msec
pflog0: bpf attached
lo0: bpf attached
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on AcerLabs M5229 chip
ad0: setting UDMA100 on AcerLabs M5229 chip
ad0: 38154MB <IC25N040ATCS04 0 CA4OA71A> at ata0-master UDMA100
ad0: 78140160 sectors [77520C/16H/63S] 16 sectors/interrupt 1 depth queue
Interrupt storm detected on "irq11: cbb0 cbb1+"; throttling interrupt source
found-> vendor=0x168c, dev=0x0013, revid=0x01
bus=3, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
ath0: <Atheros 5212> mem 0x88000000-0x8800ffff irq 11 at device 0.0 on cardbus1
ath0: [MPSAFE]
ath0: bpf attached
ath0: Ethernet address: 00:0f:b5:26:a8:92
ath0: bpf attached
ath0: bpf attached
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 5.9 phy 4.3 radio 4.6
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
acpi_ec0: info: new max delay is 180 us
acpi_ec0: info: new max delay is 190 us
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=BIOSDMA cable=40 wire
acd0: setting PIO4 on AcerLabs M5229 chip
acd0: <DW-224E/A.0H> CDRW drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 1658KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, testacpi_ec0: info: new max delay is 11000 us
write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ATA PseudoRAID loaded
GEOM: new disk ad0
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
pci0: driver added
found-> vendor=0x10b9, dev=0x5237, revid=0x03
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D3
pci0:2:0: reprobing on driver added
pci0:2:0: Transition from D3 to D0
pci0:2:0: Transition from D0 to D3
found-> vendor=0x10b9, dev=0x5457, revid=0x00
bus=0, slot=8, func=0
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D3
pci0:8:0: reprobing on driver added
pci0:8:0: Transition from D3 to D0
pci0:8:0: Transition from D0 to D3
found-> vendor=0x104c, dev=0x8026, revid=0x00
bus=0, slot=12, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0012, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D3
pci0:12:0: reprobing on driver added
pci0:12:0: Transition from D3 to D0
pci0:12:0: Transition from D0 to D3
found-> vendor=0x10b9, dev=0x7101, revid=0x00
bus=0, slot=17, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:17:0: reprobing on driver added
pci1: driver added
found-> vendor=0x1002, dev=0x4336, revid=0x00
bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0287, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
pci1:5:0: reprobing on driver added
pci0: driver added
found-> vendor=0x10b9, dev=0x5237, revid=0x03
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D3
pci0:2:0: reprobing on driver added
pci0:2:0: Transition from D3 to D0
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xd0004000-0xd0004fff irq 9 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0004000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
found-> vendor=0x10b9, dev=0x5457, revid=0x00
bus=0, slot=8, func=0
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D3
pci0:8:0: reprobing on driver added
pci0:8:0: Transition from D3 to D0
pci0:8:0: Transition from D0 to D3
found-> vendor=0x104c, dev=0x8026, revid=0x00
bus=0, slot=12, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0012, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D3
pci0:12:0: reprobing on driver added
pci0:12:0: Transition from D3 to D0
pci0:12:0: Transition from D0 to D3
found-> vendor=0x10b9, dev=0x7101, revid=0x00
bus=0, slot=17, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:17:0: reprobing on driver added
pci1: driver added
found-> vendor=0x1002, dev=0x4336, revid=0x00
bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0287, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
pci1:5:0: reprobing on driver added
pci0: driver added
found-> vendor=0x10b9, dev=0x5457, revid=0x00
bus=0, slot=8, func=0
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D3
pci0:8:0: reprobing on driver added
pci0:8:0: Transition from D3 to D0
pci0:8:0: Transition from D0 to D3
found-> vendor=0x104c, dev=0x8026, revid=0x00
bus=0, slot=12, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0012, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D3
pci0:12:0: reprobing on driver added
pci0:12:0: Transition from D3 to D0
pci0:12:0: Transition from D0 to D3
found-> vendor=0x10b9, dev=0x7101, revid=0x00
bus=0, slot=17, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:17:0: reprobing on driver added
pci1: driver added
found-> vendor=0x1002, dev=0x4336, revid=0x00
bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0287, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
pci1:5:0: reprobing on driver added
Linux ELF exec handler installed
battery0: battery initialization done, tried 2 times
pci0: driver added
found-> vendor=0x10b9, dev=0x5457, revid=0x00
bus=0, slot=8, func=0
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D3
pci0:8:0: reprobing on driver added
pci0:8:0: Transition from D3 to D0
pci0:8:0: Transition from D0 to D3
found-> vendor=0x104c, dev=0x8026, revid=0x00
bus=0, slot=12, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0012, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D3
pci0:12:0: reprobing on driver added
pci0:12:0: Transition from D3 to D0
pci0:12:0: Transition from D0 to D3
found-> vendor=0x10b9, dev=0x7101, revid=0x00
bus=0, slot=17, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:17:0: reprobing on driver added
pci1: driver added
found-> vendor=0x1002, dev=0x4336, revid=0x00
bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0287, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
pci1:5:0: reprobing on driver added
drm0: <ATI Radeon RS100 Mobility U1> port 0x9000-0x90ff mem 0xe0000000-0xefffffff,0xd0100000-0xd010ffff irq 9 at device 5.0 on pci1
info: [drm] Initialized radeon 1.16.0 20050311 on minor 0
error: [drm:pid561:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
error: [drm:pid561:drm_unlock] *ERROR* Process 561 using kernel context 0
More information about the freebsd-mobile
mailing list