HP nx9005 and Netgear WG511T

Dylan Wylie d.wylie at wylie.nl
Sat Aug 20 17:45:37 GMT 2005


Kirill Ponomarew wrote:

>On Sat, Aug 20, 2005 at 06:10:31PM +0200, Dylan Wylie wrote:
>  
>
>>>You're able to run it on HP Compaq nx9005 ?
>>>      
>>>
>>Older compaq's; one pressario1600 and a E500
>>    
>>
>>>I'm afraid there is something more broken than ath driver.  After
>>>unplugging the card, I'm also getting on console:
>>>
>>>ath0: ath_reset: unable to reset hardware; hal status 3229953940
>>>ath0: hardware error; resetting
>>>ath0: ath_chan_set: unable to reset channel 6 (2437 Mhz)
>>>ath0: ath_reset: unable to reset hardware; hal status 3229953940
>>>ath0: detached
>>>
>>>-Kirill
>>>
>>>      
>>>
>>So,what cardbus hardware for an nx9005?
>>for presario 1600 it's:
>>cbb0: <TI1211 PCI-CardBus Bridge> at device 10.0 on pci0
>>cardbus0: <CardBus bus> on cbb0
>>pccard0: <16-bit PCCard bus> on cbb0
>>    
>>
>
>cbb0: <O2Micro OZ6933 PCI-CardBus Bridge> mem 0x80000000-0x80000fff irq 11 at device 10.0 on pci0
>cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80000000
>cardbus0: <CardBus bus> on cbb0
>pccard0: <16-bit PCCard bus> on cbb0
>
>cbb1: <O2Micro OZ6933 PCI-CardBus Bridge> at device 10.1 on pci0
>cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000
>cardbus1: <CardBus bus> on cbb1
>pccard1: <16-bit PCCard bus> on cbb1
>pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.ISA_.LNKF:0)
>pcib0: slot 10 INTA routed to irq 11 via \\_SB_.PCI0.ISA_.LNKF
>cbb1: [MPSAFE]
>
>  
>
>>I am still curious if you can get the card to work on _any_ other machine?
>>    
>>
>
>Yes, the card works perfect on all another machines.
>
>  
>
>>The messages on uplugging would't realy worry me actually; it does
>>detach eventualy. Could be wrong though.  Perhaps some-one else
>>can enlighten us on the ghz stuff: does it have any 'real' value,
>>or is it just some hardware string?
>>    
>>
>
>-Kirill
>  
>
Hmm. Probably best to sum things up, including all the dmesg outputs and 
take it over to -current.
And perhaps including any info on other cards in these cbb's (do other 
cards work? same result for either cbb?)
That is; unless any-one else has any sugestions. Perhaps some-one can 
provide some feedback on this combo (OZ6933+ath).


DW


More information about the freebsd-mobile mailing list