N-only access point on FreeBSD 11

[Adrian Chadd]

hi,

as in, no 11bg rates?



-adrian


On 18 October 2016 at 20:13, kbenjamin Coplon <mr.gaga at gmail.com> wrote:
> Hi, I'm trying to configure an ATH3980 as a wireless access point.
> I would like it to operate in N-only mode, but for some reason I can only
> make it work with GN.
>
> Any advice as to how I can make this work would be very helpful.
> Thank You
> Benjamin Sauerhaft Coplon
>
>
> Here is the relevant section of  /etc/rc.conf
>
> #Wireless
> wlans_ath0="wlan0"
> create_args_wlan0="wlanmode hostap"
> hostapd_enable="YES"
> ifconfig_wlan0="inet 10.0.0.1 netmask 255.255.255.0 ssid ishmael mode 11n"
>
>
> and here is the output of "ifconfig wlan0"
> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>         ether 7c:c3:a1:b3:b3:06
>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>         media: IEEEwlan0:
> flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>         ether 7c:c3:a1:b3:b3:06
>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>         media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>
>         status: running
>         ssid ishmael channel 1 (2412 MHz 11g ht/20) bssid 7c:c3:a1:b3:b3:06
>         regdomain 100 indoor ecm authmode WPA2/802.11i privacy MIXED
>         deftxkey 2 AES-CCM 2:128-bit txpower 20 scanvalid 60 protmode CTS
>         ampdulimit 64k ampdudensity 8 shortgi wme burst dtimperiod 1 -dfs
>         groups: wlan
> _______________________________________________
> freebsd-wireless at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe at freebsd.org"