iwn0/wlan0 scan WPA2-PSK/AES as WEP on freebsd9

[Adrian Chadd]

On 9 August 2012 07:15, 乔楚 <honestqiao at gmail.com> wrote:

> Disabled mesh, wlan0 connect to AP correct.
>
> Now, I can set AP at 11bgn mixed / 300Mbps.

Ok. And what's "ifconfig -v wlan0 list scan" show now?




Adrian

> #ifconfig wlan0 list sta
> ADDR               AID CHAN RATE RSSI IDLE  TXSEQ  RXSEQ CAPS FLAG
> 8c:21:0a:43:ef:d4    1   11  54M 24.5    0      4  65168 EPS  AEHTR
> RSN HTCAP MESHCONF ATH WPS
> #ifconfig wlan0
> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>         ether 8c:a9:82:5a:41:58
>         inet 192.168.1.7 netmask 0xffffff00 broadcast 192.168.1.255
>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>         media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11ng
>         status: associated
>         ssid OpenBSD channel 11 (2462 MHz 11g ht/40-) bssid 8c:21:0a:43:ef:d4
>         country US authmode WPA2/802.11i privacy ON deftxkey UNDEF
>         AES-CCM 2:128-bit txpower 14 bmiss 10 scanvalid 450 bgscan
>         bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 64 protmode CTS
>         ampdulimit 64k -amsdutx amsdurx shortgi wme roaming MANUAL
>
> But wlan0 can connect to it whit ssid named OpenBSD.
>
> How to set is at 108Mbps or 300Mbps?