iwn0/wlan0 scan WPA2-PSK/AES as WEP on freebsd9

[乔楚]

2012/8/9 Adrian Chadd <adrian at freebsd.org>:
> Yes, try disabling mesh from your kernel compile.
>
>
>
> Adrian

Disabled mesh, wlan0 connect to AP correct.

Now, I can set AP at 11bgn mixed / 300Mbps.

#ifconfig wlan0 list sta
ADDR               AID CHAN RATE RSSI IDLE  TXSEQ  RXSEQ CAPS FLAG
8c:21:0a:43:ef:d4    1   11  54M 24.5    0      4  65168 EPS  AEHTR
RSN HTCAP MESHCONF ATH WPS
#ifconfig wlan0
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 8c:a9:82:5a:41:58
        inet 192.168.1.7 netmask 0xffffff00 broadcast 192.168.1.255
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11ng
        status: associated
        ssid OpenBSD channel 11 (2462 MHz 11g ht/40-) bssid 8c:21:0a:43:ef:d4
        country US authmode WPA2/802.11i privacy ON deftxkey UNDEF
        AES-CCM 2:128-bit txpower 14 bmiss 10 scanvalid 450 bgscan
        bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 64 protmode CTS
        ampdulimit 64k -amsdutx amsdurx shortgi wme roaming MANUAL

But wlan0 can connect to it whit ssid named OpenBSD.

How to set is at 108Mbps or 300Mbps?