New uhso(4) device: Globetrotter HSUPA Modem Option N.V.

[Fredrik Lindberg]

On 02/18/2011 01:58 AM, Brandon Gooch wrote:
> I've recently got my hands on an Option N.V. Globetrotter HSUPA Modem,
> rev 2.00/0.00, addr 2.
>
[...]
>
> Also, I tried doing something like this (as per the uhso(4) man page):
>
> brandon at x300:~$ sudo cu -l /dev/cuaU2
> Connected
> uhso2: failed to set ctrl line state to 0x01: USB_ERR_TIMEOUT
> uhso2: failed to set ctrl line state to 0x03: USB_ERR_TIMEOUT
> ޭ���T+CGDCONT=1,,
> OK
> uhso1: failed to set ctrl line state to 0x01: USB_ERR_TIMEOUT
> uhso1: failed to set ctrl line state to 0x03: USB_ERR_TIMEOUT
> _OWANCALL: 1, 1
> aޭ��aޭ��Aޭ��Aޭ��Aޭ��Aޭ��Aޭ��Aޭ�ޭ��Aޭ�ޭ��
>
> That's where I'm stuck.
>
> -Brandon
>

Hmm. Not sure whats going on here.
Could you try the other serial ports (except the diagnostic one) with
cu or minicom and see if you get the same result with those?

Fredrik