November 2009 Archives by author

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

Starting: Sun Nov 1 05:50:01 UTC 2009
Ending: Mon Nov 30 20:50:03 UTC 2009
Messages: 183

HP LaserJet P1005 USB Printer under FreeBSD 8.0-RC2 Ondřej Majerech
HP LaserJet P1005 USB Printer under FreeBSD 8.0-RC2 Ondřej Majerech
HP LaserJet P1005 USB Printer under FreeBSD 8.0-RC2 Ondřej Majerech
USB mouse not working on 8.0-RELEASE Ondřej Majerech
USB mouse not working on 8.0-RELEASE Ondřej Majerech
USB mouse not working on 8.0-RELEASE Ondřej Majerech
kern/140849: [umouse] [usb8] USB mouse doesn't work under FreeBSD 8.0-RELEASE Ondřej Majerech
MS USB mouse does not work Rashid N. Achilov
aue0 detected as ue0 on 8.0-RC2 Gavin Atkinson
8.0-RC USB/FS problem Thomas Backman
usb/125264: [patch] sysctl for set usb mouse rate (very useful for gamers - FPS games) Alexander Best
usb/127549: [umass] [patch] Meizu MiniPlayer M6 (SL) requires some quirks Alexander Best
usb/140590: [bluetooth] [usb] ng_ubt(4) ng_l2cap_process_cmd_rej warnings Alexander Best
usb/140236: Labels wiped on external Journaled USB HDD on 8.0-RC2 Trevor Blackwell
Identifying serial ports Trevor Blackwell
Epson MFP CX5600 was Re: usb2 + scanner HP ScanJet 4300C Warren Block
usb/139598: [umass] CAM reports "xptioctl: put "device pass" in your kernel config file" even when already present Buganini
usb samsung yp-r1 device issue Dan
usb/140883: axe(4) USB gigabit ethernet hangs after short period of traffic Jason Edwards
8.0-RC USB/FS problem Tom Evans
usb/106861: [usb67] [usb8] [usbdevs] [patch] Add ACER Zeevo BT-500 Bluetooth USB Adapter Mario Sergio Fujikawa Ferreira
usb/108056: [usb67] [ohci] Mouse gets powered off during probe when plugged into second ohci-controller Ullrich Franke
some quirk issue around uhid operations Daichi GOTO
[keyboard] ukbd stops working after filesystems mount at boot time Andriy Gapon
[madwimax] madwimax-0.1.1 patch for FreeBSD 8 (very buggy) Maxim Giryaev
usb/140923: Add support for new rev of USB Ethernet chip Brett Glass
ASIX USB-to-Ethernet drivers Brett Glass
usb/140883: [axe] USB gigabit ethernet hangs after short period of traffic Brett Glass
ASIX USB-to-Ethernet drivers Brett Glass
usb/140883: [axe] USB gigabit ethernet hangs after short period of traffic Brett Glass
usb/140160: USB ports are no longer "active" after ACPI suspend/resume cycle. Brandon Gooch
usb/140160: USB ports are no longer "active" after ACPI suspend/resume cycle. Brandon Gooch
usb/140160: USB ports are no longer "active" after ACPI suspend/resume cycle. Brandon Gooch
usb/140236: Labels wiped on external Journaled USB HDD on 8.0-RC2 Monty Hall
usb/140236: Labels wiped on external Journaled USB HDD on 8.0-RC2 Monty Hall
usb/140242: dev/usb/controller/ehci_ix4xx.c shortcomings Sebastian Huber
usb/140242: dev/usb/controller/ehci_ix4xx.c shortcomings Sebastian Huber
umass.c question Sebastian Huber
usb thermometer - TEMPer - FreeBSD Torfinn Ingolfsen
usb thermometer - TEMPer - FreeBSD Torfinn Ingolfsen
usb thermometer - TEMPer - FreeBSD Torfinn Ingolfsen
FreeBSD - support for DisplayLink devices? Torfinn Ingolfsen
FreeBSD - support for DisplayLink devices? Torfinn Ingolfsen
FreeBSD - support for DisplayLink devices? Torfinn Ingolfsen
FreeBSD - support for DisplayLink devices? Torfinn Ingolfsen
usb/139598: [umass] CAM reports "xptioctl: put "device pass" in your kernel config file" even when already present Momchil Ivanov
usb/139598: [umass] CAM reports "xptioctl: put "device pass" in your kernel config file" even when already present Momchil Ivanov
usb/140259: libusb-1.0 portability/compatibility nits Robert Jenssen
usb/140325: Missing/incorrect initialisation and memory leak in libusb10/libusb20 Robert Jenssen
usb/140325: Missing/incorrect initialisation and memory leak in libusb10/libusb20 Robert Jenssen
usb/140325: Missing/incorrect initialisation and memory leak in libusb10/libusb20 Robert Jenssen
8.0-RC3 USB lock up on mounting two partitions from one USB drive Guojun Jin
8.0-RC3 USB lock up on mounting two partitions from one USB drive Guojun Jin
8.0-RC3 USB lock up on mounting two partitions from one USB drive Guojun Jin
8.0-RC USB problem -- how to recover a damaged USB stick Guojun Jin
8.0-RC USB/FS problem Guojun Jin
8.0-RC USB/FS problem Guojun Jin
8.0-RC USB/FS problem Guojun Jin
8.0-RC USB/FS problem Guojun Jin
8.0-RC USB/FS problem Guojun Jin
8.0-RC USB/FS problem Guojun Jin
8.0-RC USB/FS problem Guojun Jin
8.0-RC USB/FS problem Guojun Jin
8.0-R USB/FS problem Guojun Jin
usb/71455: [umass] Slow USB umass performance of 5.3 Radim Kolar
uaudio recording problem Richard Kolkovich
uaudio recording problem Richard Kolkovich
usb/140928: ZTE CDMA2000 1X EV-DO (MG478/AC8700) is not working Eimar Koort
MS USB mouse does not work Dan Langille
Problem with usb external storage Ever Last
usb/140477: [patch] allow boot-time attachment of daX devices to GEOM_ELI Scott Long
AnyDATA ADU-500A USB-modem and a lot of "ubsa_cfg_request" errors Alexey Markov
AnyDATA ADU-500A USB-modem and a lot of "ubsa_cfg_request" errors Alexey Markov
AnyDATA ADU-500A USB-modem and a lot of "ubsa_cfg_request" errors Alexey Markov
[keyboard] ukbd stops working after filesystems mount at boot time Travelling Particle
[keyboard] ukbd stops working after filesystems mount at boot time Travelling Particle
[keyboard] ukbd stops working after filesystems mount at boot time Travelling Particle
[keyboard] ukbd stops working after filesystems mount at boot time Travelling Particle
[keyboard] ukbd stops working after filesystems mount at boot time Travelling Particle
[keyboard] ukbd stops working after filesystems mount at boot time Travelling Particle
aue0 detected as ue0 on 8.0-RC2 Rui Paulo
uhci_interrupt: host controller halted Bukin Ruslan
uhci_interrupt: host controller halted Bukin Ruslan
usb/140477: [umass] [patch] allow boot-time attachment of daX devices to GEOM_ELI Eygene Ryabinkin
usb/140477: [umass] [patch] allow boot-time attachment of daX devices to GEOM_ELI Eygene Ryabinkin
[madwimax] madwimax-0.1.1 patch for FreeBSD 8 (very buggy) Alexander Samarin
[madwimax] madwimax-0.1.1 patch for FreeBSD 8 (very buggy) Alexander Samarin
usb ethernet driver question Alexander Samarin
usb/140160: USB ports are no longer "active" after ACPI suspend/resume cycle. Hans Petter Selasky
usb/140160: USB ports are no longer "active" after ACPI suspend/resume cycle. Hans Petter Selasky
HP LaserJet P1005 USB Printer under FreeBSD 8.0-RC2 Hans Petter Selasky
HP LaserJet P1005 USB Printer under FreeBSD 8.0-RC2 Hans Petter Selasky
usb thermometer - TEMPer - FreeBSD Hans Petter Selasky
usb/140242: dev/usb/controller/ehci_ix4xx.c shortcomings Hans Petter Selasky
usb/140242: dev/usb/controller/ehci_ix4xx.c shortcomings Hans Petter Selasky
aue0 detected as ue0 on 8.0-RC2 Hans Petter Selasky
aue0 detected as ue0 on 8.0-RC2 Hans Petter Selasky
usb/140242: dev/usb/controller/ehci_ix4xx.c shortcomings Hans Petter Selasky
usb/140242: dev/usb/controller/ehci_ix4xx.c shortcomings Hans Petter Selasky
umass.c question Hans Petter Selasky
usb thermometer - TEMPer - FreeBSD Hans Petter Selasky
AnyDATA ADU-500A USB-modem and a lot of "ubsa_cfg_request" errors Hans Petter Selasky
AnyDATA ADU-500A USB-modem and a lot of "ubsa_cfg_request" errors Hans Petter Selasky
usb/140325: Missing/incorrect initialisation and memory leak in libusb10/libusb20 Hans Petter Selasky
usb/140325: Missing/incorrect initialisation and memory leak in libusb10/libusb20 Hans Petter Selasky
usb/140325: Missing/incorrect initialisation and memory leak in libusb10/libusb20 Hans Petter Selasky
usb/140325: Missing/incorrect initialisation and memory leak in libusb10/libusb20 Hans Petter Selasky
Epson MFP CX5600 was Re: usb2 + scanner HP ScanJet 4300C Hans Petter Selasky
usb printer rejects incoming data Hans Petter Selasky
usb printer rejects incoming data [SOLVED] Hans Petter Selasky
8.0-RC3 USB lock up on mounting two partitions from one USB drive Hans Petter Selasky
FreeBSD - support for DisplayLink devices? Hans Petter Selasky
uaudio recording problem Hans Petter Selasky
[keyboard] ukbd stops working after filesystems mount at boot time Hans Petter Selasky
[keyboard] ukbd stops working after filesystems mount at boot time Hans Petter Selasky
8.0-RC USB problem -- how to recover a damaged USB stick Hans Petter Selasky
8.0-RC USB/FS problem Hans Petter Selasky
usb/140810: 8.X+ uftdi copy and paste problem / tty overflow Hans Petter Selasky
usb ethernet driver question Hans Petter Selasky
usb/140810: 8.X+ uftdi copy and paste problem / tty overflow Hans Petter Selasky
usb/140810: 8.X+ uftdi copy and paste problem / tty overflow Hans Petter Selasky
usb/140810: 8.X+ uftdi copy and paste problem / tty overflow Hans Petter Selasky
USB mouse not working on 8.0-RELEASE Hans Petter Selasky
usb/140810: 8.X+ uftdi copy and paste problem / tty overflow Hans Petter Selasky
usb/140810: 8.X+ uftdi copy and paste problem / tty overflow Hans Petter Selasky
8.0-RC USB/FS problem Hans Petter Selasky
8.0-RC USB/FS problem Hans Petter Selasky
USB mouse not working on 8.0-RELEASE Hans Petter Selasky
8.0-RC USB/FS problem Hans Petter Selasky
uhci_interrupt: host controller halted Hans Petter Selasky
uhci_interrupt: host controller halted Hans Petter Selasky
8.0-RC USB/FS problem Hans Petter Selasky
usb/140883: axe(4) USB gigabit ethernet hangs after short period of traffic Hans Petter Selasky
usb/140883: axe(4) USB gigabit ethernet hangs after short period of traffic Hans Petter Selasky
ASIX USB-to-Ethernet drivers Hans Petter Selasky
usb/140810: 8.X+ uftdi copy and paste problem / tty overflow Corey Smith
usb/140810: 8.X+ uftdi copy and paste problem / tty overflow Corey Smith
usb/140810: 8.X+ uftdi copy and paste problem / tty overflow Corey Smith
usb/140810: 8.X+ uftdi copy and paste problem / tty overflow Corey Smith
usb/140810: 8.X+ uftdi copy and paste problem / tty overflow Corey Smith
usb/140236: Labels wiped on external Journaled USB HDD on 8.0-RC2 Rick Sprague
[keyboard] ukbd stops working after filesystems mount at boot time Hiroharu Tamaru
usb/140951: [usb uftdi] Add support for FT2232D Dual USB UART/FIFO I.C. Romain Tartiere
aue0 detected as ue0 on 8.0-RC2 Andrew Thompson
FreeBSD - support for DisplayLink devices? Andrew Thompson
usb printer rejects incoming data Alex Troussov
usb printer rejects incoming data [SOLVED] Alex Troussov
HP iLO virtual console / virtual CDROM device not recognized in 8? Ivan Voras
usb/82660: [ehci] [panic] EHCI: I/O stuck in state 'physrd'/panic Stefan Walter
USB audio device can no longer play in freebsd 8.0-RELEASE; worked in 7.X Todd Wasson
aue0 detected as ue0 on 8.0-RC2 Pyun YongHyeon
usb/140883: axe(4) USB gigabit ethernet hangs after short period of traffic Pyun YongHyeon
usb/140883: [axe] USB gigabit ethernet hangs after short period of traffic Pyun YongHyeon
ASIX USB-to-Ethernet drivers Pyun YongHyeon
usb/140883: [axe] USB gigabit ethernet hangs after short period of traffic Pyun YongHyeon
ASIX USB-to-Ethernet drivers Pyun YongHyeon
usb/140883: axe(4) USB gigabit ethernet hangs after short period of traffic Pyun YongHyeon
usb/140477: [umass] [patch] allow boot-time attachment of daX devices to GEOM_ELI Bjoern A. Zeeb
usb/140477: [umass] [patch] allow boot-time attachment of daX devices to GEOM_ELI Bjoern A. Zeeb
usb/138563: [usb8] [patch] Increase buffer sizes to accomodate longer USB strings brucec at FreeBSD.org
Current problem reports assigned to freebsd-usb@FreeBSD.org FreeBSD bugmaster
Current problem reports assigned to freebsd-usb@FreeBSD.org FreeBSD bugmaster
Current problem reports assigned to freebsd-usb@FreeBSD.org FreeBSD bugmaster
Current problem reports assigned to freebsd-usb@FreeBSD.org FreeBSD bugmaster
Current problem reports assigned to freebsd-usb@FreeBSD.org FreeBSD bugmaster
Epson MFP CX5600 was Re: usb2 + scanner HP ScanJet 4300C eculp
docs/107924: [usb67] usbd(8) does not call detach gavin at FreeBSD.org
usb/127549: [umass] [usb67] [patch] Meizu MiniPlayer M6 (SL) requires some quirks gavin at FreeBSD.org
usb/140810: [uftdi] 8.X copy and paste problem / tty overflow gavin at FreeBSD.org
kern/140849: [umouse] [usb8] USB mouse doesn't work under FreeBSD 8.0-RELEASE gavin at FreeBSD.org
usb/140883: axe(4) USB gigabit ethernet hangs after short period of traffic gavin at FreeBSD.org
usb/140893: [urtw] WPA2 not working on rtl8187b gavin at FreeBSD.org
usb/140904: [build] Kernel fails to build if some unused USB Ethernet interfaces are omitted; error in /sys/conf/files gavin at FreeBSD.org
usb/125264: [patch] sysctl for set usb mouse rate (very useful for gamers - FPS games) linimon at FreeBSD.org
usb/140477: [umass] [patch] allow boot-time attachment of daX devices to GEOM_ELI linimon at FreeBSD.org
kern/140614: [uplcom] [patch] adding support for Radio Shack Gigware USB to Serial cable (26-949) to uplcom linimon at FreeBSD.org
usb/140920: [install] USB based install fails on 8.0-RELEASE [regression] linimon at FreeBSD.org
usb/140883: axe(4) USB gigabit ethernet hangs after short period of traffic sub mesa
kern/140714: system freeze when disconect my flash usb remko at FreeBSD.org
kern/140714: system freeze when disconect my flash usb remko at FreeBSD.org
usb/140325: commit references a PR dfilter service
usb/140242: commit references a PR dfilter service
usb/140325: commit references a PR dfilter service

Last message date: Mon Nov 30 20:50:03 UTC 2009
Archived on: Mon Nov 30 20:52:02 UTC 2009

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

This archive was generated by Pipermail 0.09 (Mailman edition).