USB2: [was: umass not detected correctly, axe not transmitting] AXE problems

[Hiroharu Tamaru]

At Wed, 11 Feb 2009 16:57:36 +0100, Hans Petter Selasky wrote:
> > > > ugen3.3: <ASIX Electronics> at usbus3
> > > > axe0: <ASIX Electronics AX88178, rev 2.00/0.01, addr 3> on usbus3
> > > > axe0: PHYADDR 0xe0:0x18
> > > > miibus0: <MII bus> on axe0
> > > > ciphy0: <Cicada VSC8211 10/100/1000TX PHY> PHY 24 on miibus0
> > > > ciphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> > > > 1000baseT-FDX, auto ue0: <USB Ethernet> on axe0
> > > > ue0: Ethernet address: 00:90:cc:xx:xx:xx
> > > > ue0: link state changed to DOWN
> > > > ue0: link state changed to UP
> > > >
> 
> > >
> > > Turn on debugging:
> > >
> > > sysctl hw.usb2.axe.debug=15
> > >
> > > And repeat test.
> >
> >   with hw.usb2.axe.debug=15, I have:
> >
> > ugen3.3: <ASIX Electronics> at usbus3 (disconnected)
> > pid 3244 (dhclient), uid 65: exited on signal 11
> > ugen3.3: <ASIX Electronics> at usbus3
> > axe0: <ASIX Electronics AX88178, rev 2.00/0.01, addr 3> on usbus3
> > axe0: PHYADDR 0xe0:0x18
> > miibus0: <MII bus> on axe0
> > ciphy0: <Cicada VSC8211 10/100/1000TX PHY> PHY 24 on miibus0
> > ciphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> > 1000baseT-FDX, auto ue0: <USB Ethernet> on axe0
> > ue0: Ethernet address: 00:90:cc:f7:bc:2e
> > ue0: link state changed to DOWN
> > ue0: link state changed to UP
> >
> 
> > The hardware is a PLANEX GU-1000T ethernet adapter.
> >
> > What can I do now?
> 
> Does netstat indicate any receive errors on the AXE interface?
> 
> netstat -i

Nope.

Name    Mtu Network       Address              Ipkts Ierrs    Opkts Oerrs  Coll
...
ue0    1500 <Link#4>      00:90:cc:f7:bc:2e       52     0       12     0     0
ue0    1500 192.168.1.0   192.168.1.3              0     -        4     -     -

The latter line is the result of statically asigning an address,
and then 'ping -n 192.168.1.1'ing for four seconds.

> Maybe "Pyun YongHyeon" should have a look at this.
>
> And you are running the latest current?

I updated to -current as of about an hour or two ago.

> --HPS

Hiroharu