USB2: [was: umass not detected correctly, axe not transmitting] AXE problems

[Hans Petter Selasky]

On Wednesday 11 February 2009, Hiroharu Tamaru wrote:
> Hi, Hans
>
> >
> > This is a known issue, see:
> >
> > http://wiki.freebsd.org/USB
>
> This worked very well.  Thanks.
> I assume it will be committed to the tree sometime near
> in the future, right?

I suspect so.

> > >
> > > ugen3.3: <ASIX Electronics> at usbus3
> > > axe0: <ASIX Electronics AX88178, rev 2.00/0.01, addr 3> on usbus3
> > > axe0: PHYADDR 0xe0:0x18
> > > miibus0: <MII bus> on axe0
> > > ciphy0: <Cicada VSC8211 10/100/1000TX PHY> PHY 24 on miibus0
> > > ciphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> > > 1000baseT-FDX, auto ue0: <USB Ethernet> on axe0
> > > ue0: Ethernet address: 00:90:cc:xx:xx:xx
> > > ue0: link state changed to DOWN
> > > ue0: link state changed to UP
> > >

> >
> > Turn on debugging:
> >
> > sysctl hw.usb2.axe.debug=15
> >
> > And repeat test.
>
>   with hw.usb2.axe.debug=15, I have:
>
> ugen3.3: <ASIX Electronics> at usbus3 (disconnected)
> pid 3244 (dhclient), uid 65: exited on signal 11
> ugen3.3: <ASIX Electronics> at usbus3
> axe0: <ASIX Electronics AX88178, rev 2.00/0.01, addr 3> on usbus3
> axe0: PHYADDR 0xe0:0x18
> miibus0: <MII bus> on axe0
> ciphy0: <Cicada VSC8211 10/100/1000TX PHY> PHY 24 on miibus0
> ciphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto ue0: <USB Ethernet> on axe0
> ue0: Ethernet address: 00:90:cc:f7:bc:2e
> ue0: link state changed to DOWN
> ue0: link state changed to UP
>

> The hardware is a PLANEX GU-1000T ethernet adapter.
>
> What can I do now?

Does netstat indicate any receive errors on the AXE interface?

netstat -i

Maybe "Pyun YongHyeon" should have a look at this.

And you are running the latest current?

--HPS