LSI SAS2008 mps driver preferred firmware version

[Freddie Cash]

On Mon, Nov 16, 2015 at 11:36 AM, Kevin Oberman <rkoberman at gmail.com> wrote:

> On Mon, Nov 16, 2015 at 1:00 AM, Borja Marcos <borjam at sarenet.es> wrote:
>
> >
> > On Nov 14, 2015, at 3:31 PM, Gary Palmer wrote:
> >
> > > You can do thinks in /boot/loader.conf to hard code bus and drive
> > > assignments.
> > >
> > > e.g.
> > >
> > > hint.da.0.at="scbus0"
> > > hint.da.0.target="19"
> > > hint.da.0.unit="0"
> > > hint.da.1.at="scbus0"
> > > hint.da.1.target="18"
> > > hint.da.1.unit="0"
> >
> > Beware, the target number assignment is not predictable. There's no
> > guarantee especially if you replace
> > a disk.
> >
> >
> >
> >
> >
> > Borja.
> >
>
> As already mentioned, unless you are using zfs, use gpart to label you file
> systems/disks. Then use the /dev/gpt/LABEL as the mount device in fstab.
>

​Even if you are using ZFS, labelling the drives with the location of the
disk in the system (enclosure, column, row, whatever) makes things so much
easier to work with when there are disk-related issues.

Just create a single partition that covers the whole disk, label it, and
use the label to create the vdevs in the pool.​

-- 
Freddie Cash
fjwcash at gmail.com