LSI SAS2008 mps driver preferred firmware version

[Kevin Oberman]

On Mon, Nov 16, 2015 at 1:00 AM, Borja Marcos <borjam at sarenet.es> wrote:

>
> On Nov 14, 2015, at 3:31 PM, Gary Palmer wrote:
>
> > You can do thinks in /boot/loader.conf to hard code bus and drive
> > assignments.
> >
> > e.g.
> >
> > hint.da.0.at="scbus0"
> > hint.da.0.target="19"
> > hint.da.0.unit="0"
> > hint.da.1.at="scbus0"
> > hint.da.1.target="18"
> > hint.da.1.unit="0"
>
> Beware, the target number assignment is not predictable. There's no
> guarantee especially if you replace
> a disk.
>
>
>
>
>
> Borja.
>

As already mentioned, unless you are using zfs, use gpart to label you file
systems/disks. Then use the /dev/gpt/LABEL as the mount device in fstab.
--
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: rkoberman at gmail.com
PGP Fingerprint: D03FB98AFA78E3B78C1694B318AB39EF1B055683