mps driver on 10.2-BETA

[Konstantin Kulikov]

Sorry, I don't remember exact version. Tried it this week, monday (july
20), but I didn't flash it myself, it came to me with P20 from the store.

On Fri, Jul 24, 2015 at 5:25 PM Dan Langille <dan at langille.org> wrote:

>
> On Fri, Jul 24, 2015 at 4:08 AM, Konstantin Kulikov <k.kulikov2 at gmail.com>
> wrote:
>
>> Hey.
>> I have "LSI Logic SAS2308 (8 Port SAS)" and P20 didn't work for me - was
>> getting checksum error even on CURRENT (which has v20 driver).
>> I downgraded to P19 and put it in production with 10.1-RELEASE (v19
>> driver) and it works perfectly.
>>
>> On Thu, Jul 23, 2015 at 11:18 PM Dan Langille <dan at langille.org> wrote:
>>
>>> Hello
>>>
>>> I'm setting up a new server with some M1015 cards and I'm planning on
>>> using FreeBSD 10.2.
>>>
>>> I've heard reports that the 20.00.00.00 driver was unstable on FreeBSD
>>> and that I should use P19 firmware instead.  Then today I found this report
>>> from January.
>>>
>>>
>>> https://forums.freenas.org/index.php?threads/upgraded-to-9-3-and-getting-warning-firmware-version-19-does-not-match-driver-version-16-for-dev.25925/page-4#post-168811
>>>
>>> I see that firmware 20.00.04.00 is out and I've flashed my three cards
>>> with that. I am guessing the problems reported above were dealt with in the
>>> firmware upgrade, as opposed to any driver changes.
>>>
>>> Is my best course of action to use the P20 firmware in this case?
>>>
>>> Thanks.
>>>
>>>
> Konstantin,
>
> To be clear, were you using P20.00.04.00 or P20.00.00.00?  If you don't
> know, when did you try P20?
>
> I understand that the problems with P20 on 10.x were fixed up by
> P20.00.04.00
>
> Cheers
>