mps driver on 10.2-BETA

[Dan Langille]

On Fri, Jul 24, 2015 at 4:08 AM, Konstantin Kulikov <k.kulikov2 at gmail.com>
wrote:

> Hey.
> I have "LSI Logic SAS2308 (8 Port SAS)" and P20 didn't work for me - was
> getting checksum error even on CURRENT (which has v20 driver).
> I downgraded to P19 and put it in production with 10.1-RELEASE (v19
> driver) and it works perfectly.
>
> On Thu, Jul 23, 2015 at 11:18 PM Dan Langille <dan at langille.org> wrote:
>
>> Hello
>>
>> I'm setting up a new server with some M1015 cards and I'm planning on
>> using FreeBSD 10.2.
>>
>> I've heard reports that the 20.00.00.00 driver was unstable on FreeBSD
>> and that I should use P19 firmware instead.  Then today I found this report
>> from January.
>>
>>
>> https://forums.freenas.org/index.php?threads/upgraded-to-9-3-and-getting-warning-firmware-version-19-does-not-match-driver-version-16-for-dev.25925/page-4#post-168811
>>
>> I see that firmware 20.00.04.00 is out and I've flashed my three cards
>> with that. I am guessing the problems reported above were dealt with in the
>> firmware upgrade, as opposed to any driver changes.
>>
>> Is my best course of action to use the P20 firmware in this case?
>>
>> Thanks.
>>
>>
Konstantin,

To be clear, were you using P20.00.04.00 or P20.00.00.00?  If you don't
know, when did you try P20?

I understand that the problems with P20 on 10.x were fixed up by
P20.00.04.00

Cheers