mps driver on 10.2-BETA

[Konstantin Kulikov]

Hey.
I have "LSI Logic SAS2308 (8 Port SAS)" and P20 didn't work for me - was
getting checksum error even on CURRENT (which has v20 driver).
I downgraded to P19 and put it in production with 10.1-RELEASE (v19 driver)
and it works perfectly.

On Thu, Jul 23, 2015 at 11:18 PM Dan Langille <dan at langille.org> wrote:

> Hello
>
> I'm setting up a new server with some M1015 cards and I'm planning on
> using FreeBSD 10.2.
>
> I've heard reports that the 20.00.00.00 driver was unstable on FreeBSD and
> that I should use P19 firmware instead.  Then today I found this report
> from January.
>
>
> https://forums.freenas.org/index.php?threads/upgraded-to-9-3-and-getting-warning-firmware-version-19-does-not-match-driver-version-16-for-dev.25925/page-4#post-168811
>
> I see that firmware 20.00.04.00 is out and I've flashed my three cards
> with that. I am guessing the problems reported above were dealt with in the
> firmware upgrade, as opposed to any driver changes.
>
> Is my best course of action to use the P20 firmware in this case?
>
> Thanks.
>
> —
> Dan Langille dvl@
> http://langille.org/
>
>
>
>
>
>