LSI1064 and LSI1064E and mpt

[Matthew Jacob]

And the problem is....?

On 10/12/06, Johannes.Kruger at nokia.com <Johannes.Kruger at nokia.com> wrote:
> Hi.
> I figured I'll give this mailing list a shot in helping me figure out a
> problem I have.
>
> I have 2 reference boards from LSI, using the mpt driver.
> Each one has MPI FW revision  1.5.13.0
> They repond differently.
> The PCI-X version LSI1064 reports running in RAID-1 and do NOT get the
> error message.
> The PCI-express do get the error message, and thus reports RAID-0
> Both are configured as RAID-1 Integrated mirroring. Using the same 2
> disks on both, swapping them out back and forth between the testing.
>
> NOTE: the behavior is the same with FW version 1.5.12.0 except with
> 1.5.12.0 I get notify events on which I can report sync percentage.
>
> ---------------- ERROR MESSAGE -----------------------
> .
> .
> mpt_read_cfg_page: Config Info Status 22
> mpt_refresh_raid_vol: Failed to read RAID Vol Page(0)
> mpt0:vol0(mpt0:0:0): Settings (netlog:mpt ..  )
> mpt0:vol0(mpt0:0:0): 0 Members:
> mpt0:vol0(mpt0:0:0): RAID-0 - Optimal
> .
> .
> ------------------------------------------------------
>
>
> Johan
>
>
> .
> _______________________________________________
> freebsd-scsi at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"
>