LSI1064 and LSI1064E and mpt

[Johannes.Kruger at nokia.com]

Hi.
I figured I'll give this mailing list a shot in helping me figure out a
problem I have.

I have 2 reference boards from LSI, using the mpt driver.
Each one has MPI FW revision  1.5.13.0
They repond differently.
The PCI-X version LSI1064 reports running in RAID-1 and do NOT get the
error message.
The PCI-express do get the error message, and thus reports RAID-0
Both are configured as RAID-1 Integrated mirroring. Using the same 2
disks on both, swapping them out back and forth between the testing.

NOTE: the behavior is the same with FW version 1.5.12.0 except with
1.5.12.0 I get notify events on which I can report sync percentage.

---------------- ERROR MESSAGE -----------------------
.
.
mpt_read_cfg_page: Config Info Status 22
mpt_refresh_raid_vol: Failed to read RAID Vol Page(0)
mpt0:vol0(mpt0:0:0): Settings (netlog:mpt ..  )
mpt0:vol0(mpt0:0:0): 0 Members:
mpt0:vol0(mpt0:0:0): RAID-0 - Optimal
.
.
------------------------------------------------------


Johan


.