iSCSI first steps!

[Scott Long]

On Fri, 18 Feb 2005, Danny Braniss wrote:

Looks wonderful!  What are your next steps for it?

Scott

>
> shuttle-2# camcontrol devlist
> <HL-DT-ST CD-ROM GCR-8523B 1.00>   at scbus2 target 0 lun 0 (cd0,pass0)
> <Intransa IP5000 1>                at scbus3 target 0 lun 0 (pass1,da0)
> shuttle-2# ls /dev/da*
> /dev/da0
> shuttle-2# fdisk /dev/da0
> ******* Working on device /dev/da0 *******
> parameters extracted from in-core disklabel are:
> cylinders=8354 heads=255 sectors/track=63 (16065 blks/cyl)
>
> Figures below won't work with BIOS for partitions not in cyl 1
> parameters to be used for BIOS calculations are:
> cylinders=8354 heads=255 sectors/track=63 (16065 blks/cyl)
>
> fdisk: invalid fdisk partition table found
> Media sector size is 512
> Warning: BIOS sector numbering starts with sector 1
> Information from DOS bootblock is:
> The data for partition 1 is:
> sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
>    start 63, size 134206947 (65530 Meg), flag 80 (active)
>        beg: cyl 0/ head 1/ sector 1;
>        end: cyl 161/ head 254/ sector 63
> The data for partition 2 is:
> <UNUSED>
> The data for partition 3 is:
> <UNUSED>
> The data for partition 4 is:
> <UNUSED>
> shuttle-2#
>
>
>