iSCSI first steps!

[Danny Braniss]

shuttle-2# camcontrol devlist
<HL-DT-ST CD-ROM GCR-8523B 1.00>   at scbus2 target 0 lun 0 (cd0,pass0)
<Intransa IP5000 1>                at scbus3 target 0 lun 0 (pass1,da0)
shuttle-2# ls /dev/da*
/dev/da0
shuttle-2# fdisk /dev/da0
******* Working on device /dev/da0 *******
parameters extracted from in-core disklabel are:
cylinders=8354 heads=255 sectors/track=63 (16065 blks/cyl)

Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=8354 heads=255 sectors/track=63 (16065 blks/cyl)

fdisk: invalid fdisk partition table found
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
    start 63, size 134206947 (65530 Meg), flag 80 (active)
        beg: cyl 0/ head 1/ sector 1;
        end: cyl 161/ head 254/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
shuttle-2#