IBM ServeRAID 5i on IBM xSeries 225 + HP surestore dat 40

Mon Feb 9 19:31:28 PST 2004

Hi,

The FreeBSD ServeRAID driver only handles RAID arrays right now and
has no SCSI passthrough interface.  I'm not sure what it would take
to add this functionality, but it probably isn't trivial.

Scott

ArkaD wrote:
> 
> Hi.
> 
> I have problem with HP surestore dat 40 tape.
> 
> I have installed FreeBSD 5.2 on IBM xSeries 225 machine. I have 3 disks on channel 1.
> I have created two logical drives of type raid 5 from them.
> It works fine.
> 
> But I have also tape, but it is not recognized by kernel.
> Tape is on channel 2.
> 
> When I boot from linux (for example knoppix) tape is recognized
> by kernel.
> 
> I have noticed that people had some problems with ServeRAID
> because it is new in FreeBSD and exists only in 5.x.
> 
> Is it possible that FreeBSD driver does not recognize tape, or device
> that is on channel 2 ?
> 
> 
> ArkaD.
> 
> 
> 
> Some additional stuff:
> --------------------------
> 
> dmesg:
> ------
> 
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 5.2-RELEASE #0: Sun Jan 11 04:21:45 GMT 2004
>     root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a33000.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a331f4.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(TM) CPU 2.66GHz (2666.78-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
> 
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Hyperthreading: 2 logical CPUs
> real memory  = 1073676288 (1023 MB)
> avail memory = 1033486336 (985 MB)
> ACPI APIC Table: <IntelR AWRDACPI>
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0: Changing APIC ID to 4
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> ioapic2 <Version 2.0> irqs 48-71 on motherboard
> Pentium Pro MTRR support enabled
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <IntelR AWRDACPI> on motherboard
> pcibios: BIOS version 2.10
> Using $PIR table, 13 entries at 0xc00fde60
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_cpu1: <CPU> on acpi0
> acpi_cpu2: <CPU> on acpi0
> device_probe_and_attach: acpi_cpu2 attach returned 6
> acpi_cpu2: <CPU> on acpi0
> device_probe_and_attach: acpi_cpu2 attach returned 6
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <Intel Generic host to PCI bridge> mem 0xe8000000-0xebffffff at
> device 0.0 on pci0
> pci0: <unknown> at device 0.1 (no driver attached)
> pcib1: <PCI-PCI bridge> mem 0xec000000-0xefffffff at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.P64A -
> AE_NOT_FOUND
> pci2: <ACPI PCI bus> on pcib2
> pci2: <base peripheral, interrupt controller> at device 28.0 (no driver
> attached)
> pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci2
> pci3: <ACPI PCI bus> on pcib3
> bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem
> 0xf5000000-0xf500ffff irq 48 at device 1.0 on pci3
> bge0: Ethernet address: 00:0c:76:53:8c:bb
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
> 1000baseTX-FDX, auto
> pci2: <base peripheral, interrupt controller> at device 30.0 (no driver
> attached)
> pcib4: <ACPI PCI-PCI bridge> at device 31.0 on pci2
> pci4: <ACPI PCI bus> on pcib4
> ips0: <IBM ServeRAID Adapter> mem 0xf0000000-0xf3ffffff irq 24 at device
> 1.0 on pci4
> pci0: <unknown> at device 2.1 (no driver attached)
> uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd400-0xd41f irq
> 16 at device 29.0 on pci0
> usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd000-0xd01f irq
> 19 at device 29.1 on pci0
> usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> pci0: <serial bus, USB> at device 29.7 (no driver attached)
> pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci5: <ACPI PCI bus> on pcib5
> pci5: <display, VGA> at device 1.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH4 UDMA100 controller> port
> 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata0: [MPSAFE]
> ata1: at 0x170 irq 15 on atapci0
> ata1: [MPSAFE]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pci0: <multimedia, audio> at device 31.5 (no driver attached)
> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
> 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> sio1 port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> ppc0 port 0x378-0x37f irq 7 on acpi0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model Generic PS/2 mouse, device ID 0
> acpi_cpu2: <CPU> on acpi0
> device_probe_and_attach: acpi_cpu2 attach returned 6
> acpi_cpu2: <CPU> on acpi0
> device_probe_and_attach: acpi_cpu2 attach returned 6
> orm0: <Option ROMs> at iomem 0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 10.000 msec
> acd0: CDROM <SAMSUNG CD-ROM SC-148C> at ata0-master PIO4
> ips0: adapter type: ServeRAID 5i II (sarasota)
> ips0: logical drives: 2
> ips0: Logical Drive 0: RAID5 sectors: 131952640, state OK
> ips0: Logical Drive 1: RAID5 sectors: 10240000, state OK
> ipsd0: <Logical Drive> on ips0
> GEOM: create disk ipsd0 dp=0xc6b50f10
> ipsd0: Logical Drive  (64430MB)
> ipsd1: <Logical Drive> on ips0
> GEOM: create disk ipsd1 dp=0xc6bb6410
> ipsd1: Logical Drive  (5000MB)
> SMP: AP CPU #1 Launched!
> Mounting root from ufs:/dev/ipsd0s1a
> 
> 
> 
> 
> _______________________________________________
> freebsd-scsi at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"
> 