IBM ServeRAID 5i on IBM xSeries 225 + HP surestore dat 40

[ArkaD]

Hi.

I have problem with HP surestore dat 40 tape.

I have installed FreeBSD 5.2 on IBM xSeries 225 machine. I have 3 disks on channel 1.
I have created two logical drives of type raid 5 from them.
It works fine.

But I have also tape, but it is not recognized by kernel.
Tape is on channel 2.

When I boot from linux (for example knoppix) tape is recognized
by kernel.

I have noticed that people had some problems with ServeRAID
because it is new in FreeBSD and exists only in 5.x.

Is it possible that FreeBSD driver does not recognize tape, or device
that is on channel 2 ?


ArkaD.



Some additional stuff:
--------------------------

dmesg:
------

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE #0: Sun Jan 11 04:21:45 GMT 2004
    root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a33000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a331f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.66GHz (2666.78-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 1073676288 (1023 MB)
avail memory = 1033486336 (985 MB)
ACPI APIC Table: <IntelR AWRDACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IntelR AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 13 entries at 0xc00fde60
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel Generic host to PCI bridge> mem 0xe8000000-0xebffffff at
device 0.0 on pci0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <PCI-PCI bridge> mem 0xec000000-0xefffffff at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.P64A -
AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib2
pci2: <base peripheral, interrupt controller> at device 28.0 (no driver
attached)
pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci2
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem
0xf5000000-0xf500ffff irq 48 at device 1.0 on pci3
bge0: Ethernet address: 00:0c:76:53:8c:bb
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
pci2: <base peripheral, interrupt controller> at device 30.0 (no driver
attached)
pcib4: <ACPI PCI-PCI bridge> at device 31.0 on pci2
pci4: <ACPI PCI bus> on pcib4
ips0: <IBM ServeRAID Adapter> mem 0xf0000000-0xf3ffffff irq 24 at device
1.0 on pci4
pci0: <unknown> at device 2.1 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd400-0xd41f irq
16 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd000-0xd01f irq
19 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
orm0: <Option ROMs> at iomem 0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acd0: CDROM <SAMSUNG CD-ROM SC-148C> at ata0-master PIO4
ips0: adapter type: ServeRAID 5i II (sarasota)
ips0: logical drives: 2
ips0: Logical Drive 0: RAID5 sectors: 131952640, state OK
ips0: Logical Drive 1: RAID5 sectors: 10240000, state OK
ipsd0: <Logical Drive> on ips0
GEOM: create disk ipsd0 dp=0xc6b50f10
ipsd0: Logical Drive  (64430MB)
ipsd1: <Logical Drive> on ips0
GEOM: create disk ipsd1 dp=0xc6bb6410
ipsd1: Logical Drive  (5000MB)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ipsd0s1a