pid 916 (tcsh): sigreturn set_fpcontext err 22

Thu May 9 06:02:30 UTC 2013

I am seeing this error after a svn update (today) under 9.1 and under
CURRENT. Unfortunately I cannot login (even from the console) to scarf
off dmesg.boot but I found the path to correcting the problem is to boot
the old kernel.

Specifically, with the failed kernel I can boot to single user mode
without a problem but after the system goes multi-user all my commands
core dump with the subject error. In single user mode I simply restore
the old kernel (i.e., mv kernel.old) and all is well.

The following is the dmesg.boot from the failed kernel when booting to
single user mode.

Any clue?

root at rotfl:~ # cat dmesg.boot 
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #0 r250401: Wed May  8 22:21:12 PDT 2013
    root at rotfl:/usr/obj/disk-1/src/sys/GENERIC amd64
FreeBSD clang version 3.3 (trunk 178860) 20130405
WARNING: WITNESS option enabled, expect reduced performance.
CPU: AMD Opteron(TM) Processor 6272                  (2100.04-MHz
K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x600f12  Family = 0x15  Model = 0x1
Stepping = 2

Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>

Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD
Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,<b23>,<b24>>
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 31976153088 (30494 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <052412 APIC0723>
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 16 core(s)
 cpu0 (BSP): APIC ID: 32
 cpu1 (AP): APIC ID: 33
 cpu2 (AP): APIC ID: 34
 cpu3 (AP): APIC ID: 35
 cpu4 (AP): APIC ID: 36
 cpu5 (AP): APIC ID: 37
 cpu6 (AP): APIC ID: 38
 cpu7 (AP): APIC ID: 39
 cpu8 (AP): APIC ID: 40
 cpu9 (AP): APIC ID: 41
 cpu10 (AP): APIC ID: 42
 cpu11 (AP): APIC ID: 43
 cpu12 (AP): APIC ID: 44
 cpu13 (AP): APIC ID: 45
 cpu14 (AP): APIC ID: 46
 cpu15 (AP): APIC ID: 47
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <SMCI > on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of fec00000, 1403f00 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem
0xfed40000-0xfed44fff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
pci5: <ACPI PCI bus> on pcib1
mps0: <LSI SAS2008> port 0xe000-0xe0ff mem
0xdff3c000-0xdff3ffff,0xdff40000-0xdff7ffff irq 18 at device 0.0 on pci5
mps0: Firmware: 14.00.00.00, Driver: 14.00.00.02-fbsd
mps0: IOCCapabilities:
1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib2
mps1: <LSI SAS2008> port 0xd000-0xd0ff mem
0xdfe3c000-0xdfe3ffff,0xdfe40000-0xdfe7ffff irq 16 at device 0.0 on pci4
mps1: Firmware: 14.00.00.00, Driver: 14.00.00.02-fbsd
mps1: IOCCapabilities:
185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR>
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
mps2: <LSI SAS2008> port 0xc000-0xc0ff mem
0xdfd3c000-0xdfd3ffff,0xdfd40000-0xdfd7ffff irq 16 at device 0.0 on pci3
mps2: Firmware: 14.00.00.00, Driver: 14.00.00.02-fbsd
mps2: IOCCapabilities:
1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 13.0 on pci0
pci2: <ACPI PCI bus> on pcib4
igb0: <Intel(R) PRO/1000 Network Connection version - 2.3.10> port
0xb800-0xb81f mem
0xdfce0000-0xdfcfffff,0xdfcc0000-0xdfcdffff,0xdfc9c000-0xdfc9ffff irq 17
at device 0.0 on pci2
igb0: Using MSIX interrupts with 9 vectors
igb0: Ethernet address: 00:25:90:78:8b:7e
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: Bound queue 4 to cpu 4
igb0: Bound queue 5 to cpu 5
igb0: Bound queue 6 to cpu 6
igb0: Bound queue 7 to cpu 7
igb1: <Intel(R) PRO/1000 Network Connection version - 2.3.10> port
0xb400-0xb41f mem
0xdfc60000-0xdfc7ffff,0xdfc40000-0xdfc5ffff,0xdfc1c000-0xdfc1ffff irq 18
at device 0.1 on pci2
igb1: Using MSIX interrupts with 9 vectors
igb1: Ethernet address: 00:25:90:78:8b:7f
igb1: Bound queue 0 to cpu 8
igb1: Bound queue 1 to cpu 9
igb1: Bound queue 2 to cpu 10
igb1: Bound queue 3 to cpu 11
igb1: Bound queue 4 to cpu 12
igb1: Bound queue 5 to cpu 13
igb1: Bound queue 6 to cpu 14
igb1: Bound queue 7 to cpu 15
ahci0: <ATI IXP700 AHCI SATA controller> port
0xa000-0xa007,0x9000-0x9003,0x8000-0x8007,0x7000-0x7003,0x6000-0x600f
mem 0xdfbf8400-0xdfbf87ff irq 22 at device 17.0 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbf7000-0xdfbf7fff
irq 16 at device 18.0 on pci0
usbus0 on ohci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbf6000-0xdfbf6fff
irq 16 at device 18.1 on pci0
usbus1 on ohci1
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem
0xdfbf8800-0xdfbf88ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbfa000-0xdfbfafff
irq 18 at device 19.0 on pci0
usbus3 on ohci2
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbf9000-0xdfbf9fff
irq 18 at device 19.1 on pci0
usbus4 on ohci3
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem
0xdfbf8c00-0xdfbf8cff irq 19 at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP700/800 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci1: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> mem
0xdd000000-0xddffffff,0xdeffc000-0xdeffffff,0xdf000000-0xdf7fffff irq 20
at device 4.0 on pci1
ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbfb000-0xdfbfbfff
irq 18 at device 20.5 on pci0
usbus6 on ohci4
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 7 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xd3800-0xd47ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
usbus6: 12Mbps Full Speed USB v1.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen4.1: <ATI> at usbus4
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen3.1: <ATI> at usbus3
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen6.1: <ATI> at usbus6
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub6: 2 ports with 2 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub3: 3 ports with 3 removable, self powered
uhub4: 3 ports with 3 removable, self powered
ugen6.2: <Winbond Electronics Corp> at usbus6
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0,
rev 1.10/0.01, addr 2> on usbus6
kbd2 at ukbd0
uhub2: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
(probe257:mps1:0:2:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe257:mps1:0:2:0): CAM status: Invalid Target ID
(probe257:mps1:0:2:0): Error 22, Unretryable error
(probe258:mps1:0:3:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe258:mps1:0:3:0): CAM status: Invalid Target ID
(probe258:mps1:0:3:0): Error 22, Unretryable error
(probe1:mps1:0:2:1): INQUIRY. CDB: 12 20 00 00 24 00 
(probe1:mps1:0:2:1): CAM status: Invalid Target ID
(probe1:mps1:0:2:1): Error 22, Unretryable error
(probe2:mps1:0:3:1): INQUIRY. CDB: 12 20 00 00 24 00 
(probe2:mps1:0:3:1): CAM status: Invalid Target ID
(probe2:mps1:0:3:1): Error 22, Unretryable error
(probe1:mps1:0:2:2): INQUIRY. CDB: 12 40 00 00 24 00 
(probe1:mps1:0:2:2): CAM status: Invalid Target ID
(probe1:mps1:0:2:2): Error 22, Unretryable error
(probe2:mps1:0:3:2): INQUIRY. CDB: 12 40 00 00 24 00 
(probe2:mps1:0:3:2): CAM status: Invalid Target ID
(probe2:mps1:0:3:2): Error 22, Unretryable error
(probe1:mps1:0:2:3): INQUIRY. CDB: 12 60 00 00 24 00 
(probe1:mps1:0:2:3): CAM status: Invalid Target ID
(probe1:mps1:0:2:3): Error 22, Unretryable error
(probe2:mps1:0:3:3): INQUIRY. CDB: 12 60 00 00 24 00 
(probe2:mps1:0:3:3): CAM status: Invalid Target ID
(probe2:mps1:0:3:3): Error 22, Unretryable error
(probe1:mps1:0:2:4): INQUIRY. CDB: 12 80 00 00 24 00 
(probe1:mps1:0:2:4): CAM status: Invalid Target ID
(probe1:mps1:0:2:4): Error 22, Unretryable error
(probe2:mps1:0:3:4): INQUIRY. CDB: 12 80 00 00 24 00 
(probe2:mps1:0:3:4): CAM status: Invalid Target ID
(probe2:mps1:0:3:4): Error 22, Unretryable error
(probe1:mps1:0:2:5): INQUIRY. CDB: 12 a0 00 00 24 00 
(probe1:mps1:0:2:5): CAM status: Invalid Target ID
(probe1:mps1:0:2:5): Error 22, Unretryable error
(probe2:mps1:0:3:5): INQUIRY. CDB: 12 a0 00 00 24 00 
(probe2:mps1:0:3:5): CAM status: Invalid Target ID
(probe2:mps1:0:3:5): Error 22, Unretryable error
(probe1:mps1:0:2:6): INQUIRY. CDB: 12 c0 00 00 24 00 
(probe1:mps1:0:2:6): CAM status: Invalid Target ID
(probe1:mps1:0:2:6): Error 22, Unretryable error
(probe2:mps1:0:3:6): INQUIRY. CDB: 12 c0 00 00 24 00 
(probe2:mps1:0:3:6): CAM status: Invalid Target ID
(probe2:mps1:0:3:6): Error 22, Unretryable error
(probe1:mps1:0:2:7): INQUIRY. CDB: 12 e0 00 00 24 00 
(probe1:mps1:0:2:7): CAM status: Invalid Target ID
(probe1:mps1:0:2:7): Error 22, Unretryable error
(probe2:mps1:0:3:7): INQUIRY. CDB: 12 e0 00 00 24 00 
(probe2:mps1:0:3:7): CAM status: Invalid Target ID
(probe2:mps1:0:3:7): Error 22, Unretryable error
(probe255:mps1:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10
00 00 
(probe255:mps1:0:0:0): CAM status: SCSI Status Error
(probe255:mps1:0:0:0): SCSI status: Check Condition
(probe255:mps1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid
command operation code)
(probe255:mps1:0:0:0): Command Specific Info: 0x1e00
(probe255:mps1:0:0:0): Error 22, Unretryable error
(probe1:mps1:0:3:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe1:mps1:0:3:0): CAM status: Invalid Target ID
(probe1:mps1:0:3:0): Error 22, Unretryable error
(probe2:mps1:0:2:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe2:mps1:0:2:0): CAM status: Invalid Target ID
(probe2:mps1:0:2:0): Error 22, Unretryable error
(probe1:mps1:0:3:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe1:mps1:0:3:0): CAM status: Invalid Target ID
(probe1:mps1:0:3:0): Error 22, Unretryable error
(probe2:mps1:0:2:0): INQUIRY. CDB: 12 00 00 00 24 00 
(probe2:mps1:0:2:0): CAM status: Invalid Target ID
(probe2:mps1:0:2:0): Error 22, Unretryable error
(probe3:mps1:0:3:1): INQUIRY. CDB: 12 20 00 00 24 00 
(probe3:mps1:0:3:1): CAM status: Invalid Target ID
(probe3:mps1:0:3:1): Error 22, Unretryable error
(probe1:mps1:0:2:1): INQUIRY. CDB: 12 20 00 00 24 00 
(probe1:mps1:0:2:1): CAM status: Invalid Target ID
(probe1:mps1:0:2:1): Error 22, Unretryable error
(probe3:mps1:0:3:1): INQUIRY. CDB: 12 20 00 00 24 00 
(probe3:mps1:0:3:1): CAM status: Invalid Target ID
(probe3:mps1:0:3:1): Error 22, Unretryable error
(probe1:mps1:0:2:1): INQUIRY. CDB: 12 20 00 00 24 00 
(probe1:mps1:0:2:1): CAM status: Invalid Target ID
(probe1:mps1:0:2:1): Error 22, Unretryable error
(probe4:mps1:0:3:2): INQUIRY. CDB: 12 40 00 00 24 00 
(probe4:mps1:0:3:2): CAM status: Invalid Target ID
(probe4:mps1:0:3:2): Error 22, Unretryable error
(probe3:mps1:0:2:2): INQUIRY. CDB: 12 40 00 00 24 00 
(probe3:mps1:0:2:2): CAM status: Invalid Target ID
(probe3:mps1:0:2:2): Error 22, Unretryable error
(probe1:mps1:0:3:2): INQUIRY. CDB: 12 40 00 00 24 00 
(probe1:mps1:0:3:2): CAM status: Invalid Target ID
(probe1:mps1:0:3:2): Error 22, Unretryable error
(probe3:mps1:0:2:2): INQUIRY. CDB: 12 40 00 00 24 00 
(probe3:mps1:0:2:2): CAM status: Invalid Target ID
(probe3:mps1:0:2:2): Error 22, Unretryable error
(probe4:mps1:0:3:3): INQUIRY. CDB: 12 60 00 00 24 00 
(probe4:mps1:0:3:3): CAM status: Invalid Target ID
(probe4:mps1:0:3:3): Error 22, Unretryable error
(probe1:mps1:0:2:3): INQUIRY. CDB: 12 60 00 00 24 00 
(probe1:mps1:0:2:3): CAM status: Invalid Target ID
(probe1:mps1:0:2:3): Error 22, Unretryable error
(probe3:mps1:0:3:3): INQUIRY. CDB: 12 60 00 00 24 00 
(probe3:mps1:0:3:3): CAM status: Invalid Target ID
(probe3:mps1:0:3:3): Error 22, Unretryable error
(probe1:mps1:0:2:3): INQUIRY. CDB: 12 60 00 00 24 00 
(probe1:mps1:0:2:3): CAM status: Invalid Target ID
(probe1:mps1:0:2:3): Error 22, Unretryable error
(probe4:mps1:0:3:4): INQUIRY. CDB: 12 80 00 00 24 00 
(probe4:mps1:0:3:4): CAM status: Invalid Target ID
(probe4:mps1:0:3:4): Error 22, Unretryable error
(probe3:mps1:0:2:4): INQUIRY. CDB: 12 80 00 00 24 00 
(probe3:mps1:0:2:4): CAM status: Invalid Target ID
(probe3:mps1:0:2:4): Error 22, Unretryable error
(probe1:mps1:0:3:4): INQUIRY. CDB: 12 80 00 00 24 00 
(probe1:mps1:0:3:4): CAM status: Invalid Target ID
(probe1:mps1:0:3:4): Error 22, Unretryable error
(probe3:mps1:0:2:4): INQUIRY. CDB: 12 80 00 00 24 00 
(probe3:mps1:0:2:4): CAM status: Invalid Target ID
(probe3:mps1:0:2:4): Error 22, Unretryable error
(probe4:mps1:0:3:5): INQUIRY. CDB: 12 a0 00 00 24 00 
(probe4:mps1:0:3:5): CAM status: Invalid Target ID
(probe4:mps1:0:3:5): Error 22, Unretryable error
(probe1:mps1:0:2:5): INQUIRY. CDB: 12 a0 00 00 24 00 
(probe1:mps1:0:2:5): CAM status: Invalid Target ID
(probe1:mps1:0:2:5): Error 22, Unretryable error
(probe3:mps1:0:3:5): INQUIRY. CDB: 12 a0 00 00 24 00 
(probe3:mps1:0:3:5): CAM status: Invalid Target ID
(probe3:mps1:0:3:5): Error 22, Unretryable error
(probe1:mps1:0:2:5): INQUIRY. CDB: 12 a0 00 00 24 00 
(probe1:mps1:0:2:5): CAM status: Invalid Target ID
(probe1:mps1:0:2:5): Error 22, Unretryable error
(probe4:mps1:0:3:6): INQUIRY. CDB: 12 c0 00 00 24 00 
(probe4:mps1:0:3:6): CAM status: Invalid Target ID
(probe4:mps1:0:3:6): Error 22, Unretryable error
(probe3:mps1:0:2:6): INQUIRY. CDB: 12 c0 00 00 24 00 
(probe3:mps1:0:2:6): CAM status: Invalid Target ID
(probe3:mps1:0:2:6): Error 22, Unretryable error
(probe1:mps1:0:3:6): INQUIRY. CDB: 12 c0 00 00 24 00 
(probe1:mps1:0:3:6): CAM status: Invalid Target ID
(probe1:mps1:0:3:6): Error 22, Unretryable error
(probe3:mps1:0:2:6): INQUIRY. CDB: 12 c0 00 00 24 00 
(probe3:mps1:0:2:6): CAM status: Invalid Target ID
(probe3:mps1:0:2:6): Error 22, Unretryable error
(probe4:mps1:0:3:7): INQUIRY. CDB: 12 e0 00 00 24 00 
(probe4:mps1:0:3:7): CAM status: Invalid Target ID
(probe4:mps1:0:3:7): Error 22, Unretryable error
(probe1:mps1:0:2:7): INQUIRY. CDB: 12 e0 00 00 24 00 
(probe1:mps1:0:2:7): CAM status: Invalid Target ID
(probe1:mps1:0:2:7): Error 22, Unretryable error
(probe3:mps1:0:3:7): INQUIRY. CDB: 12 e0 00 00 24 00 
(probe3:mps1:0:3:7): CAM status: Invalid Target ID
(probe3:mps1:0:3:7): Error 22, Unretryable error
(probe1:mps1:0:2:7): INQUIRY. CDB: 12 e0 00 00 24 00 
(probe1:mps1:0:2:7): CAM status: Invalid Target ID
(probe1:mps1:0:2:7): Error 22, Unretryable error
(probe255:mps1:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10
00 00 
(probe255:mps1:0:0:0): CAM status: SCSI Status Error
(probe255:mps1:0:0:0): SCSI status: Check Condition
(probe255:mps1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid
command operation code)
(probe255:mps1:0:0:0): Field Replaceable Unit: 48
(probe255:mps1:0:0:0): Command Specific Info: 0x30393030
(probe255:mps1:0:0:0): Error 22, Unretryable error
da4 at mps1 bus 0 scbus1 target 0 lun 0
da4: <LSI Logical Volume 3000> Fixed Direct Access SCSI-6 device 
da4: 150.000MB/s transfers
da4: Command Queueing enabled
da4: 952720MB (1951170560 512 byte sectors: 255H 63S/T 121454C)
da0 at mps0 bus 0 scbus0 target 0 lun 0
da0: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device 
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da1 at mps0 bus 0 scbus0 target 7 lun 0
da1: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device 
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da2 at mps0 bus 0 scbus0 target 8 lun 0
da2: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device 
da2: 300.000MB/s transfers
da2: Command Queueing enabled
da2: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da3 at mps0 bus 0 scbus0 target 9 lun 0
da3: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device 
da3: 300.000MB/s transfers
da3: Command Queueing enabled
da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da5 at mps1 bus 0 scbus1 target 4 lun 0
da5: <ATA ST2000DL003-9VT1 CC32> Fixed Direct Access SCSI-6 device 
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da7 at mps2 bus 0 scbus2 target 2 lun 0
da7: <ATA ST3250410AS A> Fixed Direct Access SCSI-6 device 
da7: 300.000MB/s transfers
da7: Command Queueing enabled
da7: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
da8 at mps2 bus 0 scbus2 target 3 lun 0
da8: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device 
da8: 300.000MB/s transfers
da8: Command Queueing enabled
da8: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da6 at mps1 bus 0 scbus1 target 5 lun 0
da6: <ATA ST2000DL003-9VT1 CC32> Fixed Direct Access SCSI-6 device 
da6: 600.000MB/s transfers
da6: Command Queueing enabled
da6: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da9 at mps2 bus 0 scbus2 target 4 lun 0
da9: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device 
da9: 300.000MB/s transfers
da9: Command Queueing enabled
da9: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da10 at mps2 bus 0 scbus2 target 5 lun 0
da10: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device 
da10: 300.000MB/s transfers
da10: Command Queueing enabled
da10: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da11 at mps2 bus 0 scbus2 target 6 lun 0
da11: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device 
da11: 300.000MB/s transfers
da11: Command Queueing enabled
da11: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da12 at mps2 bus 0 scbus2 target 7 lun 0
da12: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device 
da12: 300.000MB/s transfers
da12: Command Queueing enabled
da12: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #10 Launched!
da13 at mps2 bus 0 scbus2 target 9 lun 0
da13: <ATA Hitachi HDS5C404 A250> Fixed Direct Access SCSI-6 device 
SMP: AP CPU #11 Launched!
da13: 600.000MB/s transfers
da13: Command Queueing enabled
da13: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C)
SMP: AP CPU #7 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #14 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
Timecounter "TSC" frequency 2100044099 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
da14 at mps2 bus 0 scbus2 target 10 lun 0
da14: <ATA Hitachi HDS5C404 A3B0> Fixed Direct Access SCSI-6 device 
da14: 600.000MB/s transfers
da14: Command Queueing enabled
da14: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C)
Trying to mount root from ufs:/dev/gpt/disk0 [rw]...
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0,
rev 1.10/0.01, addr 2> on usbus6
ums0: 3 buttons and [Z] coordinates ID=0