Alpha 6.0 Install...
G Trutt
mr_trutt at hotmail.com
Mon Dec 26 07:38:27 PST 2005
Dear Sir or Madam,
I am trying to install FreeBSD for Alpha, release 6.0. I have read the
documentation, but nothing I've read gives me any hints about the issue I'm
having with boot/install from CDROM. I have attached a copy of my console
output, which should give a good look at the gory details. I would
appreciate any pointers you could offer! I keep getting a cpu fault/panic
and nothing I've come across gives me any direction or starting point?
Please help.
Gorden Trutt
mr_trutt at hotmail.com
-------------- next part --------------
>>>show
auto_action HALT
boot_dev dka0.0.0.6.0
boot_file
boot_osflags 0,0
boot_reset OFF
bootdef_dev dka0.0.0.6.0
booted_dev
booted_file
booted_osflags
bus_probe_algorithm old
char_set 0
console serial
control_disfd enable
control_idema enable
control_irq11 scsi
control_irq12 mouse
control_scsi_term internal
controlp on
dump_dev
enable_audit ON
ewa0_arp_tries 3
ewa0_bootp_file
ewa0_bootp_server
ewa0_bootp_tries 3
ewa0_def_ginetaddr 0.0.0.0
ewa0_def_inetaddr 0.0.0.0
ewa0_def_inetfile
ewa0_def_sinetaddr 0.0.0.0
ewa0_def_subnetmask 0.0.0.0
ewa0_ginetaddr 0.0.0.0
ewa0_inet_init bootp
ewa0_inetaddr 0.0.0.0
ewa0_inetfile
ewa0_loop_count 3e8
ewa0_loop_inc a
ewa0_loop_patt ffffffff
ewa0_loop_size 2e
ewa0_lp_msg_node 1
ewa0_mode BNC
ewa0_protocols MOP
ewa0_sinetaddr 0.0.0.0
ewa0_tftp_tries 3
ffauto OFF
ffnext OFF
kbd_hardware_type PCXAL
language 36
language_name English(American)
license MU
mopv3_boot OFF
os_type UNIX
pal VMS PALcode V5.56-2, OSF PALcode X1.46-2
pci_parity off
pka0_disconnect 1
pka0_fast 1
pka0_host_id 7
quick_start OFF
scsi_poll ON
srm2ctrl
srm2dev
sys_serial_num
tga_sync_green 2
timer_tps 1
tt_allow_login 1
tty_dev 0
version V7.0-9 Mar 18 1999 13:41:11
>>>
>>>show dev
dka0.0.0.6.0 DKA0 RZ28M 0568
dka100.1.0.6.0 DKA100 RZ28M 0568
dka400.4.0.6.0 DKA400 RRD45 1645
dva0.0.0.0.1 DVA0
ewa0.0.0.11.0 EWA0 08-00-2B-E7-7F-DA
pka0.7.0.6.0 PKA0 SCSI Bus ID 7
>>>boot dka400
(boot dka400.4.0.6.0 -flags 0,0)
block 0 of dka400.4.0.6.0 is a valid boot block
reading 406 blocks from dka400.4.0.6.0
bootstrap code read in
base = 1f2000, image_start = 0, image_bytes = 32c00
initializing HWRPB at 2000
initializing page table at 1e4000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Consoles: SRM firmware console
VMS PAL rev: 0x1000000010538
OSF PAL rev: 0x100000002012e
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM CD9660 boot, Revision 1.2
(root at ds10.freebie.xs4all.nl, Wed Nov 2 16:27:21 UTC 2005)
Memory: 131072 k
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x619410+0x39820 syms=[0x8+0x6c060+0x8+0x59b68]
|
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Entering /boot/kernel/kernel at 0xfffffc000034a9d0...
Unrecognized boot flag '0'.
Unrecognized boot flag ','.
Unrecognized boot flag '0'.
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov 3 01:10:43 UTC 2005
root at ds10.freebie.xs4all.nl:/usr/obj/usr/src/sys/GENERIC
AlphaStation 200/400 ("Avanti")
AlphaStation 200 4/233, 233MHz
8192 byte page size, 1 processor.
CPU: EV45 (21064A) major=6 minor=0
OSF PAL rev: 0x100000002012e
real memory = 132169728 (126 MB)
avail memory = 115351552 (110 MB)
apecs0: <DECchip 21071 Core Logic chipset>
pcib0: <2107x PCI host bus adapter> on apecs0
pci0: <PCI bus> on pcib0
sym0: <810> port 0x10000-0x100ff mem 0x82000000-0x820000ff irq 11 at device
6.0
on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: interrupting at ISA irq 11
sym0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
de0: <Digital 21040 Ethernet> port 0x10100-0x1017f mem 0x82000100-0x8200017f
irq
5 at device 11.0 on pci0
de0: DEC 21040 [10Mb/s] pass 2.3
de0: Ethernet address: 08:00:2b:e7:7f:da
de0: interrupting at ISA irq 5
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: interrupting at ISA irq 14
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: interrupting at ISA irq 15
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: interrupting at ISA irq 6
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
Timecounter "i8254" frequency 1193182 Hz quality 0
Timecounter "alpha" frequency 233340819 Hz quality 800
Timecountmd0: Preers tick every 0.976 msec
Waiting 5 seconds for SCSI devices to settle
loaded image </boot/mfsroot> 4423680 bytes at 0xfffffc0000a18808
da1 at sym0 bus 0 target 1 lun 0
da1: <DEC RZ28M (C) DEC 0568> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da1: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C)
da0 at sym0 bus 0 target 0 lun 0
da0: <DEC RZ28M (C) DEC 0568> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da0: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C)
cd0 at sym0 bus 0 target 4 lun 0
cd0: <DEC RRD45 (C) DEC 1645> Removable CD-ROM SCSI-2 device
cd0: 4.237MB/s transfers (4.237MHz, offset 8)
cd0: cd present [1042004 x 512 byte records]
fatal kernel trap:
trap entry = 0x4 (unaligned access fault)
cpuid = 0
faulting va = 0xfffffc00010611c2
opcode = 0x28
register = 0x1
pc = 0xfffffc00004c77dc
ra = 0xfffffc00004c7a28
sp = 0xfffffe0007351bb0
curthread = 0xfffffc0007cff500
pid = 2, comm = g_event
panic: trap
cpuid = 0
Uptime: 11s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
Rebooting...
More information about the freebsd-questions
mailing list