D-Link DGE-560SX (Marvell 88E8061-based) doesn't see link

[Pyun YongHyeon]

On Tue, Sep 08, 2009 at 10:50:30AM +0300, Eugene Perevyazko wrote:
> On Fri, Sep 04, 2009 at 02:22:23PM -0700, Pyun YongHyeon wrote:
> > 
> > Would you back out previous changes and apply the patch at the
> > following URL?
> > http://people.freebsd.org/~yongari/msk/msk.DGE560.diff2
> > 
> > Note, I have no more access to msk(4) hardwares so it wasn't tested
> > at all except compilation.
> >
> 
> Still no success.
>  
> mskc0: <D-Link 560SX Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff irq 16 at device 0.0 on pci1
> msk0: <Marvell Technology Group Ltd. Yukon XL Id 0xb3 Rev 0x03> on mskc0
> msk0: Ethernet address: 00:21:91:52:4f:09
> miibus0: <MII bus> on msk0
> e1000phy0: <Marvell 88E1112 Gigabit PHY> PHY 0 on miibus0
> e1000phy0:  1000baseSX, 1000baseSX-FDX, auto
> mskc0: [FILTER]
> 
> ifconfig -m msk0
> msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>         options=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4>
>         capabilities=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4>
>         ether 00:21:91:52:4f:09
>         inet 10.2.3.1 netmask 0xffffff00 broadcast 10.2.3.255
>         media: Ethernet autoselect (autoselect <full-duplex>)
>         status: active
>         supported media:
>                 media autoselect
>                 media 1000baseSX mediaopt full-duplex
>                 media 1000baseSX
>                 media none
> 
> Switch shows no link on the port.
> 
> # ifconfig msk0 media 1000baseSX mediaopt full-duplex
> # ifconfig msk0
> msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>         options=11a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4>
>         ether 00:21:91:52:4f:09
>         inet 10.2.3.1 netmask 0xffffff00 broadcast 10.2.3.255
>         media: Ethernet 1000baseSX <full-duplex> (autoselect <full-duplex>)
>         status: active
> 
> Switch shows no link again.
> 
> All dev.msk.0.stats counters are zero even after trying broadcast ping.
> 
> I can arrange you root access to the host with this NIC if you have time/wish.
> 

I've sent mail in private.

> -- 
> Eugene Perevyazko