Bridge

[Vince Hoffman]

On Mon, 1 Nov 2004 AndygreenNet at netscape.net wrote:

> Hi everybody!
>
> I'm try configure bridge on FreeBSD box.
>
> Box configuration:
> %uname -srp
>        FreeBSD 5.3-RC1 i386
> %ifconfig
> xl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
>        options=9<RXCSUM,VLAN_MTU>
>        ether 00:04:79:68:02:e6
>        media: Ethernet autoselect (none)
>        status: no carrier
> fxp0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
>        options=48<VLAN_MTU,POLLING>
>        inet 213.59.235.126 netmask 0xfffffff8 broadcast 213.59.235.127
>        ether 00:0e:0c:00:58:60
>        media: Ethernet autoselect (100baseTX <full-duplex>)
>        status: active
> fxp1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
>        options=48<VLAN_MTU,POLLING>
>        ether 00:07:e9:14:01:99
>        media: Ethernet autoselect (100baseTX <full-duplex>)
>        status: active
> fxp2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
>        options=48<VLAN_MTU,POLLING>
>        inet 213.59.128.190 netmask 0xfffffffc broadcast 213.59.128.191
>        ether 00:07:e9:14:05:be
>        media: Ethernet autoselect (none)
>        status: no carrier
> plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
> pflog0: flags=0<> mtu 33208
> pfsync0: flags=0<> mtu 2020
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>        inet 127.0.0.1 netmask 0xff000000
> vlan0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
>        ether 00:07:e9:14:05:be
>        media: Ethernet autoselect (none)
>        status: no carrier
>        vlan: 218 parent interface: fxp2
> vlan1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
>        inet 62.33.196.254 netmask 0xffffff80 broadcast 62.33.196.255
>        ether 00:07:e9:14:01:99
>        media: Ethernet autoselect (100baseTX <full-duplex>)
>        status: active
>        vlan: 155 parent interface: fxp1
> vlan2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
>        ether 00:07:e9:14:01:99
>        media: Ethernet autoselect (100baseTX <full-duplex>)
>        status: active
>        vlan: 156 parent interface: fxp1
> vlan3: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
>        ether 00:07:e9:14:01:99
>        media: Ethernet autoselect (100baseTX <full-duplex>)
>        status: active
>        vlan: 90 parent interface: fxp1
> vlan4: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
>        ether 00:0e:0c:00:58:60
>        media: Ethernet autoselect (100baseTX <full-duplex>)
>        status: active
>        vlan: 156 parent interface: fxp0
> vlan5: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
>        ether 00:04:79:68:02:e6
>        media: Ethernet autoselect (none)
>        status: no carrier
>        vlan: 90 parent interface: xl0
> %vi /usr/local/etc/rc.d/bridge.sh
> #!/bin/sh
> #
> #
>
> if [ -z "${source_rc_confs_defined}"]; then
>        if [ -r /etc/defaults/rc.conf ]; then
>                . /etc/defaults/rc.conf
>                source_rc_confs
>        elif [ -r /etc/rc.conf ]; then
>                . /etc/rc.conf
>        fi
> fi
>
> case "$1" in
> start)
>        case  "${bridge_enable}" in
>                [Yy][Ee][Ss])

This looks to me like you need to add
bridge_enable="YES"
to /etc/rc.conf

>                        echo -n 'Starting bridge'
>                        sysctl -w net.link.ether.bridge.enable=1
>                        sysctl -w net.link.ether.bridge.ipfw=1
>                        sysctl -w net.link.ether.bridge.config=vlan0:218,vlan1:155,vlan2:156,vlan3:90,vlan4:156,vlan5:90,xl0:218,fxp0:155
>                ;;
>        esac
>        ;;
> stop)
>        sysctl -w net.link.ether.bridge.enable=0
>        ;;
> *)
>        echo "Usage: `basename $0` {start|stop}" >&2
>        ;;
> esac
>
> exit
> %vi /etc/rc.conf
> firewall_enable="YES"           # Set to YES to enable firewall functionality
> firewall_script="/etc/rc.firewall"      # Which script to run to set up the firewall
> firewall_type="OPEN"            # Firewall type (see /etc/rc.firewall)
> firewall_quiet="YES"            # Set to YES to suppress rule display
> firewall_logging="YES"          # Set to YES to enable events logging
> firewall_flags=""               # Flags passed to ipfw when type is a file
> ip_portrange_first="49190"      # Set first dynamically allocated port
> ip_portrange_last="65535"       # Set last dynamically allocated port
>
> Bridge do not work!
> What do I do incorrectly?
>
> __________________________________________________________________
> Switch to Netscape Internet Service.
> As low as $9.95 a month -- Sign up today at http://isp.netscape.com/register
>
> Netscape. Just the Net You Need.
>
> New! Netscape Toolbar for Internet Explorer
> Search from anywhere on the Web and block those annoying pop-ups.
> Download now at http://channels.netscape.com/ns/search/install.jsp
> _______________________________________________
> freebsd-net at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-net
> To unsubscribe, send any mail to "freebsd-net-unsubscribe at freebsd.org"
>