Bridge

[AndygreenNet at netscape.net]

Hi everybody!

I'm try configure bridge on FreeBSD box.

Box configuration:
%uname -srp
        FreeBSD 5.3-RC1 i386
%ifconfig
xl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
        options=9<RXCSUM,VLAN_MTU>
        ether 00:04:79:68:02:e6
        media: Ethernet autoselect (none)
        status: no carrier
fxp0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
        options=48<VLAN_MTU,POLLING>
        inet 213.59.235.126 netmask 0xfffffff8 broadcast 213.59.235.127
        ether 00:0e:0c:00:58:60
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
fxp1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
        options=48<VLAN_MTU,POLLING>
        ether 00:07:e9:14:01:99
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
fxp2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
        options=48<VLAN_MTU,POLLING>
        inet 213.59.128.190 netmask 0xfffffffc broadcast 213.59.128.191
        ether 00:07:e9:14:05:be
        media: Ethernet autoselect (none)
        status: no carrier
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
pflog0: flags=0<> mtu 33208
pfsync0: flags=0<> mtu 2020
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet 127.0.0.1 netmask 0xff000000
vlan0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
        ether 00:07:e9:14:05:be
        media: Ethernet autoselect (none)
        status: no carrier
        vlan: 218 parent interface: fxp2
vlan1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
        inet 62.33.196.254 netmask 0xffffff80 broadcast 62.33.196.255
        ether 00:07:e9:14:01:99
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
        vlan: 155 parent interface: fxp1
vlan2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
        ether 00:07:e9:14:01:99
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
        vlan: 156 parent interface: fxp1
vlan3: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
        ether 00:07:e9:14:01:99
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
        vlan: 90 parent interface: fxp1
vlan4: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
        ether 00:0e:0c:00:58:60
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
        vlan: 156 parent interface: fxp0
vlan5: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
        ether 00:04:79:68:02:e6
        media: Ethernet autoselect (none)
        status: no carrier
        vlan: 90 parent interface: xl0
%vi /usr/local/etc/rc.d/bridge.sh
#!/bin/sh
#
#

if [ -z "${source_rc_confs_defined}"]; then
        if [ -r /etc/defaults/rc.conf ]; then
                . /etc/defaults/rc.conf
                source_rc_confs
        elif [ -r /etc/rc.conf ]; then
                . /etc/rc.conf
        fi
fi

case "$1" in
start)
        case  "${bridge_enable}" in
                [Yy][Ee][Ss])
                        echo -n 'Starting bridge'
                        sysctl -w net.link.ether.bridge.enable=1
                        sysctl -w net.link.ether.bridge.ipfw=1
                        sysctl -w net.link.ether.bridge.config=vlan0:218,vlan1:155,vlan2:156,vlan3:90,vlan4:156,vlan5:90,xl0:218,fxp0:155
                ;;
        esac
        ;;
stop)
        sysctl -w net.link.ether.bridge.enable=0
        ;;
*)
        echo "Usage: `basename $0` {start|stop}" >&2
        ;;
esac

exit
%vi /etc/rc.conf
firewall_enable="YES"           # Set to YES to enable firewall functionality
firewall_script="/etc/rc.firewall"      # Which script to run to set up the firewall
firewall_type="OPEN"            # Firewall type (see /etc/rc.firewall)
firewall_quiet="YES"            # Set to YES to suppress rule display
firewall_logging="YES"          # Set to YES to enable events logging
firewall_flags=""               # Flags passed to ipfw when type is a file
ip_portrange_first="49190"      # Set first dynamically allocated port
ip_portrange_last="65535"       # Set last dynamically allocated port

Bridge do not work!
What do I do incorrectly?

__________________________________________________________________
Switch to Netscape Internet Service.
As low as $9.95 a month -- Sign up today at http://isp.netscape.com/register

Netscape. Just the Net You Need.

New! Netscape Toolbar for Internet Explorer
Search from anywhere on the Web and block those annoying pop-ups.
Download now at http://channels.netscape.com/ns/search/install.jsp