MPD error : "error writing len 27 frame to bypass: No route to host"

[Eric Dahan]

>
>You forgot "set iface addr ..." command. It is REQUIRED for inbound calls.

Ok

When i modify the mdp.conf :

default:
         load pptp

pptp:
         new -i ng0 pptp pptp
         set iface disable on-demand
         set iface enable proxy-arp
         set iface addrs 2.2.2.2 192.168.1.1
         set iface route 192.168.1.0/24
         set bundle disable multilink
         set bundle authname "Name"
         set bundle password "Password"
         set bundle enable encryption
         set link yes acfcomp protocomp
         set link disable pap
         set link enable chap
         set link keep-alive 10 60
         set ipcp enable vjcomp
         set ipcp ranges 2.2.2.2/32 192.168.1.1/32
         set ipcp dns 193.252.19.3
         set bundle enable compression
         set ccp enable mppc
         set ccp enable mpp-e40
         set ccp enable mpp-e128
         set ccp yes mpp-stateless
         set bundle enable crypt-reqd

The error is the even in this case : ((


Nota : The PPTP server is started on the firewall (ipf and ipnat loaded) 
that is connected to the Lan (192.168.1.0/24).


Thank you for taking the time to help out.


Multi-link PPP for FreeBSD, by Archie L. Cobbs.
Based on iij-ppp, by Toshiharu OHNO.
mpd: pid 3329, version 3.13 (root at freebsd.org 11:25 19-Apr-2003)
[pptp] ppp node is "mpd3329-pptp"
mpd: local IP address for PPTP is 2.2.2.2
[pptp] using interface ng0
[pptp:pptp] mpd: PPTP connection from 1.1.1.1:13013
pptp0: attached to connection with 1.1.1.1:13013
[pptp] IFACE: Open event
[pptp] IPCP: Open event
[pptp] IPCP: state change Initial --> Starting
[pptp] IPCP: LayerStart
[pptp] IPCP: Open event
[pptp] bundle: OPEN event in state CLOSED
[pptp] opening link "pptp"...
[pptp] link: OPEN event
[pptp] LCP: Open event
[pptp] LCP: state change Initial --> Starting
[pptp] LCP: LayerStart
[pptp] device: OPEN event in state DOWN
[pptp] attaching to peer's outgoing call
[pptp] device is now in state OPENING
[pptp] device: UP event in state OPENING
[pptp] device is now in state UP
[pptp] link: UP event
[pptp] link: origination is remote
[pptp] LCP: Up event
[pptp] LCP: state change Starting --> Req-Sent
[pptp] LCP: phase shift DEAD --> ESTABLISH
[pptp] LCP: SendConfigReq #1
  ACFCOMP
  PROTOCOMP
  MRU 1500
  MAGICNUM 44f2b21f
  AUTHPROTO CHAP MSOFTv2
[pptp] error writing len 27 frame to bypass: No route to host
pptp0-0: ignoring SetLinkInfo
[pptp] LCP: SendConfigReq #2
  ACFCOMP
  PROTOCOMP
  MRU 1500
  MAGICNUM 44f2b21f
  AUTHPROTO CHAP MSOFTv2
[pptp] error writing len 27 frame to bypass: No route to host
[pptp] LCP: SendConfigReq #3
  ACFCOMP
  PROTOCOMP
  MRU 1500
  MAGICNUM 44f2b21f
  AUTHPROTO CHAP MSOFTv2
^Cmpd: caught fatal signal int
mpd: fatal error, exiting
[pptp] IPCP: Down event
[pptp] IFACE: Close event
[pptp] IPCP: Close event
[pptp] IPCP: state change Starting --> Initial