Xircom/cardbus in 7-RELEASE

[Steven Susbauer]

Good day,

I posted to questions but did not get any response, I was told to try here.
I appear to be experiencing a problem that is similar to
http://unix.derkeiler.com/Mailing-Lists/FreeBSD/current/2006-10/msg00226.html
- Unfortunately in that thread it doesn't appear to have been resolved.

When I am using 6.3-RELEASE, my IBM EtherJet 10/100 cardbus card works
fine. On boot I receive:

cbb0: <TI1250 PCI-CardBus Bridge> mem 0x20821000-0x20821fff at device
2.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1250 PCI-CardBus Bridge> mem 0x20820000-0x20820fff at device
2.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb: Unable to map IRQ...
device_attach: cbb1 attach returned 12
....
dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem
0x88000000-0x880007ff,0x88001000-0x880017ff irq 11 at device 0.0 on cardbus0
miibus0: <MII bus> on dc0
tdkphy0: <TDK 78Q2120 media interface> on miibus0
tdkphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:06:29:xx:xx:xx


On 7-RELEASE the ports are recognized still, but I receive:

cardbus0: Unable to allocate resource to read CIS.
cardbus0: Unable to allocate resources for CIS
dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem
0x88000000-0x880007ff, 0x88001000-0x880017ff irq 11 at device 0.0 on
cardbus0
dc0: No station address in CIS!
device_attach: dc0 attach returned 6