Xircom/cardbus in 7-RELEASE

[WATANABE Kazuhiro]

Hello,

At Sun, 12 Oct 2008 12:30:51 -0500,
Steven Susbauer wrote:
> Good day,
> 
> I posted to questions but did not get any response, I was told to try here.
> I appear to be experiencing a problem that is similar to
> http://unix.derkeiler.com/Mailing-Lists/FreeBSD/current/2006-10/msg00226.html
> Unfortunately in that thread it doesn't appear to have been resolved.
> 
> When I am using 6.3-RELEASE, my IBM EtherJet 10/100 cardbus card works
> fine. On boot I receive:
> 
> cbb0: <TI1250 PCI-CardBus Bridge> mem 0x20821000-0x20821fff at device
> 2.0 on pci0
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> cbb1: <TI1250 PCI-CardBus Bridge> mem 0x20820000-0x20820fff at device
> 2.1 on pci0
> cardbus1: <CardBus bus> on cbb1
> pccard1: <16-bit PCCard bus> on cbb1
> cbb: Unable to map IRQ...
> device_attach: cbb1 attach returned 12
> ....
> dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem
> 0x88000000-0x880007ff,0x88001000-0x880017ff irq 11 at device 0.0 on cardbus0
> miibus0: <MII bus> on dc0
> tdkphy0: <TDK 78Q2120 media interface> on miibus0
> tdkphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> dc0: Ethernet address: 00:06:29:xx:xx:xx
> 
> 
> On 7-RELEASE the ports are recognized still, but I receive:
> 
> cardbus0: Unable to allocate resource to read CIS.
> cardbus0: Unable to allocate resources for CIS
> dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem
> 0x88000000-0x880007ff, 0x88001000-0x880017ff irq 11 at device 0.0 on
> cardbus0
> dc0: No station address in CIS!
> device_attach: dc0 attach returned 6

How about a patch described this PR?

 kern/115623: [cardbus] [patch] Xircom CardBus Ethernet II 10/100 Adapter (CBE2-100) doesn't work [regression]
 http://www.freebsd.org/cgi/query-pr.cgi?pr=kern%2F115623&cat=

---
WATANABE Kazuhiro (CQG00620 at nifty.ne.jp)