5.2-CURRENT still not working on my mitac 8080

[David W. Chapman Jr.]

John Baldwin wrote:

>On Thursday 15 July 2004 10:08 am, David W. Chapman Jr. wrote:
>  
>
>>John Baldwin wrote:
>>    
>>
>>>On Wednesday 14 July 2004 02:57 pm, David W. Chapman Jr. wrote:
>>>      
>>>
>>>>John Baldwin wrote:
>>>>        
>>>>
>>>>>On Wednesday 14 July 2004 09:25 am, David W. Chapman Jr. wrote:
>>>>>          
>>>>>
>>>>>>When I boot in safe mode here is the console output
>>>>>>
>>>>>>pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
>>>>>>$PIR: BIOS IRQ 10 for 1.4.INTA does not match link 0x61 irq 5
>>>>>>pci0: <PCI bus> on pcib0
>>>>>>            
>>>>>>
>>>>>Look for a BIOS upgrade.  It sounds like your BIOS has badly busted
>>>>>interrupt routing.
>>>>>          
>>>>>
>>>>I think I can get one, I don't have a problem running 4.X though, would
>>>>that be consistent with the problem you described?
>>>>        
>>>>
>>>4.x isn't smart enough to ask the BIOS how to route interrupts from the
>>>BIOS tables, it just assumes that the way it booted is ok.
>>>      
>>>
>>Unfortunately I have just upgraded to the latest BIOS revision and the
>>problem still exists.  I guess I'm dead in the water as far as 5.x goes?
>>    
>>
>
>Probably.  Is it broken when using ACPI as well?
>
>  
>
with or without ACPI and safe mode yield no luck.  I guess its DragonFly 
or Fedora Core :)