5.2-CURRENT still not working on my mitac 8080

[John Baldwin]

On Thursday 15 July 2004 10:08 am, David W. Chapman Jr. wrote:
> John Baldwin wrote:
> >On Wednesday 14 July 2004 02:57 pm, David W. Chapman Jr. wrote:
> >>John Baldwin wrote:
> >>>On Wednesday 14 July 2004 09:25 am, David W. Chapman Jr. wrote:
> >>>>When I boot in safe mode here is the console output
> >>>>
> >>>>pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
> >>>>$PIR: BIOS IRQ 10 for 1.4.INTA does not match link 0x61 irq 5
> >>>>pci0: <PCI bus> on pcib0
> >>>
> >>>Look for a BIOS upgrade.  It sounds like your BIOS has badly busted
> >>>interrupt routing.
> >>
> >>I think I can get one, I don't have a problem running 4.X though, would
> >>that be consistent with the problem you described?
> >
> >4.x isn't smart enough to ask the BIOS how to route interrupts from the
> > BIOS tables, it just assumes that the way it booted is ok.
>
> Unfortunately I have just upgraded to the latest BIOS revision and the
> problem still exists.  I guess I'm dead in the water as far as 5.x goes?

Probably.  Is it broken when using ACPI as well?

-- 
John Baldwin <jhb at FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve"  =  http://www.FreeBSD.org