FW: 8.0 BETA1 boot problem
Anton Shterenlikht
mexas at bristol.ac.uk
Thu Jul 23 23:49:12 UTC 2009
On Wed, Jul 15, 2009 at 05:49:34PM +0000, Hayer, Sukhjinder wrote:
> Hi,
> Iam trying to boot 8.0 BETA1 on the IA 64 integrity server platform and I see some Mpt0 not being able to initiliaze. Does any one have an idea as to what might be the problem. Below
> Is the part of the boot output with "boot_verbose=2" being set.
>
> pci0: <unknown> at device 1.0 (no driver attached)
> pci0: <simple comms> at device 1.1 (no driver attached)
> pci0: child uart0 requested type 4 for rid 0x14, but the BAR says it isuart0: <Non-standard ns8250 class UART with FIFOs> mem 0x88033000-0x88033fff irq 16 at device 1.2 on pci0
> uart0: [FILTER]
> uart0: fast interrupt
> uart0: console (9600,n,8,1)
> ohci0: <NEC uPD 9210 USB controller> mem 0x88032000-0x88032fff irq 17 at device 2.0 on pci0
> ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x88032000
> ohci0: [MPSAFE]
> ohci0: [ITHREAD]
> usbus0: <NEC uPD 9210 USB controller> on ohci0
> ohci1: <NEC uPD 9210 USB controller> mem 0x88031000-0x88031fff irq 18 at device 2.1 on pci0
> ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x88031000
> ohci1: [MPSAFE]
> ohci1: [ITHREAD]
> usbus1: <NEC uPD 9210 USB controller> on ohci1
> ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0x88030000-0x880300ff irq 19 at device 2.2 on pci0
> ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0x88030000
> ehci0: [MPSAFE]
> ehci0: [ITHREAD]
> usbus2: EHCI version 1.0
> usbus2: <NEC uPD 720100 USB 2.0 controller> on ehci0
> vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0x80000000-0x87ffffff,0x88020000-0x8802ffff at device 3.0 on pci0
> pcib1: <ACPI Host-PCI bridge> on acpi0
> pci1: <ACPI PCI bus> on pcib1
> pci1: domain=0, physical bus=1
> found-> vendor=0x1000, dev=0x0054, revid=0x01
> domain=0, bus=1, slot=1, func=0
> class=01-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0147, statreg=0x0230, cachelnsz=32 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x0a (2500 ns)
> intpin=a, irq=0
> powerspec 2 supports D0 D1 D2 D3 current D0
> MSI supports 1 message, 64 bit
> MSI-X supports 1 message in map 0x14
> map[10]: type I/O Port, range 32, base 0x1000, size 8, enabled
> map[14]: type Memory, range 64, base 0xa0470000, size 14, enabled
> map[1c]: type Memory, range 64, base 0xa0460000, size 16, enabled
> pcib1: matched entry for 1.1.INTA
> pcib1: slot 1 INTA hardwired to IRQ 27
> found-> vendor=0x14e4, dev=0x1648, revid=0x10
> domain=0, bus=1, slot=2, func=0
> class=02-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0146, statreg=0x02b0, cachelnsz=32 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=29
> powerspec 2 supports D0 D3 current D0
> MSI supports 8 messages, 64 bit
> map[10]: type Memory, range 64, base 0xa0450000, size 16, enabled
> pcib1: matched entry for 1.2.INTA
> pcib1: slot 2 INTA hardwired to IRQ 29
> found-> vendor=0x14e4, dev=0x1648, revid=0x10
> domain=0, bus=1, slot=2, func=1
> class=02-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0146, statreg=0x02b0, cachelnsz=32 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=30
> powerspec 2 supports D0 D3 current D0
> MSI supports 8 messages, 64 bit
> map[10]: type Memory, range 64, base 0xa0440000, size 16, enabled
> pcib1: matched entry for 1.2.INTB
> pcib1: slot 2 INTB hardwired to IRQ 30
> mpt0: <LSILogic SAS/SATA Adapter> mem 0xa0470000-0xa0473fff,0xa0460000-0xa046ffff irq 27 at device 1.0 on pci1
> mpt0: Lazy allocation of 0x100 bytes rid 0x10 type 4 at 0x1100
> mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1100
> mpt0: Reserved 0x4000 bytes for rid 0x14 type 3 at 0xa0470000
> mpt0: [MPSAFE]
> mpt0: [ITHREAD]
> mpt0: soft reset failed: device not running
> mpt0: WARNING - Failed hard reset! Trying to initialize anyway.
> mpt0: mpt_reset: failed hard reset (0:0)
> mpt0: WARNING - Failed hard reset! Trying to initialize anyway.
> mpt0: mpt_reset: failed hard reset (0:1)
> mpt0: WARNING - Failed hard reset! Trying to initialize anyway.
> mpt0: mpt_reset: failed hard reset (0:2)
> mpt0: WARNING - Failed hard reset! Trying to initialize anyway.
> mpt0: mpt_reset: failed hard reset (0:3)
> mpt0: WARNING - Failed hard reset! Trying to initialize anyway.
> mpt0: mpt_reset: failed hard reset (0:4)
> mpt0: soft reset failed: device not running
> mpt0: WARNING - Failed hard reset! Trying to initialize anyway.
mpt is a SCSI driver. Have you updated your firmware?
Mine is
SYSREV
Current firmware revisions
MP FW : E.03.32
BMC FW : 01.53
EFI FW : 01.22
System FW : 02.31
--
Anton Shterenlikht
Room 2.6, Queen's Building
Mech Eng Dept
Bristol University
University Walk, Bristol BS8 1TR, UK
Tel: +44 (0)117 928 8233
Fax: +44 (0)117 929 4423
More information about the freebsd-ia64
mailing list