FW: 8.0 BETA1 boot problem
Hayer, Sukhjinder
sukhjinder.hayer at hp.com
Wed Jul 15 18:08:30 UTC 2009
Hi,
Iam trying to boot 8.0 BETA1 on the IA 64 integrity server platform and I see some Mpt0 not being able to initiliaze. Does any one have an idea as to what might be the problem. Below
Is the part of the boot output with "boot_verbose=2" being set.
pci0: <unknown> at device 1.0 (no driver attached)
pci0: <simple comms> at device 1.1 (no driver attached)
pci0: child uart0 requested type 4 for rid 0x14, but the BAR says it isuart0: <Non-standard ns8250 class UART with FIFOs> mem 0x88033000-0x88033fff irq 16 at device 1.2 on pci0
uart0: [FILTER]
uart0: fast interrupt
uart0: console (9600,n,8,1)
ohci0: <NEC uPD 9210 USB controller> mem 0x88032000-0x88032fff irq 17 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x88032000
ohci0: [MPSAFE]
ohci0: [ITHREAD]
usbus0: <NEC uPD 9210 USB controller> on ohci0
ohci1: <NEC uPD 9210 USB controller> mem 0x88031000-0x88031fff irq 18 at device 2.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x88031000
ohci1: [MPSAFE]
ohci1: [ITHREAD]
usbus1: <NEC uPD 9210 USB controller> on ohci1
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0x88030000-0x880300ff irq 19 at device 2.2 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0x88030000
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <NEC uPD 720100 USB 2.0 controller> on ehci0
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0x80000000-0x87ffffff,0x88020000-0x8802ffff at device 3.0 on pci0
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1000, dev=0x0054, revid=0x01
domain=0, bus=1, slot=1, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0230, cachelnsz=32 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 1 message in map 0x14
map[10]: type I/O Port, range 32, base 0x1000, size 8, enabled
map[14]: type Memory, range 64, base 0xa0470000, size 14, enabled
map[1c]: type Memory, range 64, base 0xa0460000, size 16, enabled
pcib1: matched entry for 1.1.INTA
pcib1: slot 1 INTA hardwired to IRQ 27
found-> vendor=0x14e4, dev=0x1648, revid=0x10
domain=0, bus=1, slot=2, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0146, statreg=0x02b0, cachelnsz=32 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=29
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xa0450000, size 16, enabled
pcib1: matched entry for 1.2.INTA
pcib1: slot 2 INTA hardwired to IRQ 29
found-> vendor=0x14e4, dev=0x1648, revid=0x10
domain=0, bus=1, slot=2, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0146, statreg=0x02b0, cachelnsz=32 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=30
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xa0440000, size 16, enabled
pcib1: matched entry for 1.2.INTB
pcib1: slot 2 INTB hardwired to IRQ 30
mpt0: <LSILogic SAS/SATA Adapter> mem 0xa0470000-0xa0473fff,0xa0460000-0xa046ffff irq 27 at device 1.0 on pci1
mpt0: Lazy allocation of 0x100 bytes rid 0x10 type 4 at 0x1100
mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1100
mpt0: Reserved 0x4000 bytes for rid 0x14 type 3 at 0xa0470000
mpt0: [MPSAFE]
mpt0: [ITHREAD]
mpt0: soft reset failed: device not running
mpt0: WARNING - Failed hard reset! Trying to initialize anyway.
mpt0: mpt_reset: failed hard reset (0:0)
mpt0: WARNING - Failed hard reset! Trying to initialize anyway.
mpt0: mpt_reset: failed hard reset (0:1)
mpt0: WARNING - Failed hard reset! Trying to initialize anyway.
mpt0: mpt_reset: failed hard reset (0:2)
mpt0: WARNING - Failed hard reset! Trying to initialize anyway.
mpt0: mpt_reset: failed hard reset (0:3)
mpt0: WARNING - Failed hard reset! Trying to initialize anyway.
mpt0: mpt_reset: failed hard reset (0:4)
mpt0: soft reset failed: device not running
mpt0: WARNING - Failed hard reset! Trying to initialize anyway.
Thanks
Sukhjinder
More information about the freebsd-ia64
mailing list