September 2018 Archives by subject
Starting: Sat Sep 1 01:28:08 UTC 2018
Ending: Sun Sep 30 23:43:36 UTC 2018
Messages: 130
- acpi, pci, spibus -- tying it all together
Yuri Pankov
- acpi, pci, spibus -- tying it all together
Konstantin Belousov
- acpi, pci, spibus -- tying it all together
Yuri Pankov
- ACPI GPE handler: mtx_lock() by idle thread
Yuri Pankov
- ACPI GPE handler: mtx_lock() by idle thread
Konstantin Belousov
- ACPI GPE handler: mtx_lock() by idle thread
Yuri Pankov
- Adding kernel config options
Eric McCorkle
- allow specifying literal values in MODULE_PNP_INFO(9)
Yuri Pankov
- allow specifying literal values in MODULE_PNP_INFO(9)
Warner Losh
- allow specifying literal values in MODULE_PNP_INFO(9)
Yuri Pankov
- An experiment in enabling discard with e.MMC trim on a Pine64+ 2GB (based on head -r338675)
Mark Millard
- APU Bristol Ridge graphics support
Rozhuk Ivan
- APU Bristol Ridge graphics support
Johannes Dieterich
- APU Bristol Ridge graphics support
Rozhuk Ivan
- APU Bristol Ridge graphics support
Johannes Dieterich
- APU Bristol Ridge graphics support
Rozhuk Ivan
- APU Bristol Ridge graphics support
Johannes Dieterich
- APU Bristol Ridge graphics support
Rozhuk Ivan
- APU Bristol Ridge graphics support
Johannes Dieterich
- APU Bristol Ridge graphics support
Rozhuk Ivan
- APU Bristol Ridge graphics support
Wolfgang Zenker
- APU Bristol Ridge graphics support
Johannes Dieterich
- APU Bristol Ridge graphics support
Rozhuk Ivan
- APU Bristol Ridge graphics support
Rozhuk Ivan
- Attempting to receivce zero-length message with recvmsg
Tamas Szakaly
- Attempting to receivce zero-length message with recvmsg
Gary Jennejohn
- Attempting to receivce zero-length message with recvmsg
Tamas Szakaly
- attempt to make UEFI bootable pendrive
Wojciech Puchar
- attempt to make UEFI bootable pendrive
Wojciech Puchar
- Bugzilla CLI tool
Oleksandr Tymoshenko
- Can't get pidfile to work in rc script
Lee Brown
- Can't get pidfile to work in rc script
Matthew Seaman
- Can't get pidfile to work in rc script
Lee Brown
- Can't get pidfile to work in rc script
RW
- Celeron J3160 with enabled Turbo mode stays at 480MHz(lowestsetting) forever and can not lower frequency without Tuebo mod
Cy Schubert
- Celeron J3160 with enabled Turbo mode stays at 480MHz (lowest setting) forever and can not lower frequency without Tuebo mode
Lev Serebryakov
- Celeron J3160 with enabled Turbo mode stays at 480MHz (lowestsetting) forever and can not lower frequency without Tuebo mode
Cy Schubert
- Celeron J3160 with enabled Turbo mode stays at 480MHz (lowestsetting) forever and can not lower frequency without Tuebo mode
Lev Serebryakov
- Celeron J3160 with enabled Turbo mode stays at 480MHz (lowestsetting) forever and can not lower frequency without Tuebo mode
Eric van Gyzen
- Celeron J3160 with enabled Turbo mode stays at 480MHz (lowestsetting) forever and can not lower frequency without Tuebo mode
Cy Schubert
- Celeron J3160 with enabled Turbo mode stays at 480MHz (lowestsetting) forever and can not lower frequency without Tuebo mode
Lev Serebryakov
- Celeron J3160 with enabled Turbo mode stays at 480MHz (lowestsetting) forever and can not lower frequency without Tuebo mode
D. Ebdrup
- Celeron J3160 with enabled Turbo mode stays at 480MHz (lowestsetting) forever and can not lower frequency without Tuebo mode
Lev Serebryakov
- Celeron J3160 with enabled Turbo mode stays at 480MHz(lowestsetting) forever and can not lower frequency without Tuebo mode
Cy Schubert
- Celeron J3160 with enabled Turbo mode stays at 480MHz(lowestsetting) forever and can not lower frequency without Tuebo mode
Lev Serebryakov
- Celeron J3160 with enabled Turbo mode stays at 480MHz (lowestsetting) forever and can not lower frequency without Tuebo mode
Conrad Meyer
- Celeron J3160 with enabled Turbo mode stays at 480MHz(lowestsetting) forever and can not lower frequency without Tuebo mode
Lev Serebryakov
- Celeron J3160 with enabled Turbo mode stays at 480MHz (lowestsetting) forever and can not lower frequency without Tuebo mode
Lev Serebryakov
- Celeron J3160 with enabled Turbo mode stays at 480MHz(lowestsetting) forever and can not lower frequency without Tuebo mode
Benjamin Kaduk
- Celeron J3160 with enabled Turbo mode stays at 480MHz(lowestsetting) forever and can not lower frequency without Tuebo mode
Lev Serebryakov
- Celeron J3160 with enabled Turbo mode stays at 480MHz(lowestsetting) forever and can not lower frequency without Tuebo mode
Benjamin Kaduk
- Celeron J3160 with enabled Turbo mode stays at 480MHz(lowestsetting) forever and can not lower frequency without Tuebo mode
Lev Serebryakov
- Celeron J3160 with enabled Turbo mode stays at 480MHz(lowestsetting) forever and can not lower frequency without Tuebo mode
Lev Serebryakov
- Does sys/dev/fxp/if_fxp.c using cbp->tbd[-1].tb_size = htole32(m->m_pkthdr.tso_segsz << 16) make any sense?
Mark Millard
- Does sys/dev/fxp/if_fxp.c using cbp->tbd[-1].tb_size = htole32(m->m_pkthdr.tso_segsz << 16) make any sense?
Warner Losh
- Does sys/dev/fxp/if_fxp.c using cbp->tbd[-1].tb_size = htole32(m->m_pkthdr.tso_segsz << 16) make any sense?
Mark Millard
- Does sys/dev/fxp/if_fxp.c using cbp->tbd[-1].tb_size = htole32(m->m_pkthdr.tso_segsz << 16) make any sense?
Brooks Davis
- Does sys/dev/fxp/if_fxp.c using cbp->tbd[-1].tb_size = htole32(m->m_pkthdr.tso_segsz << 16) make any sense?
Mark Millard
- Does sys/dev/fxp/if_fxp.c using cbp->tbd[-1].tb_size = htole32(m->m_pkthdr.tso_segsz << 16) make any sense?
Warner Losh
- epoch(9) background information?
Sebastian Huber
- epoch(9) background information?
Will Andrews
- FreeBSD -CURRENT on AMD Ryzen5
Jake Champlin
- FreeBSD -CURRENT on AMD Ryzen5
Rajesh Kumar
- FreeBSD -CURRENT on AMD Ryzen5
Jake Champlin
- Fwd: Getting valid JSON output with xo(1)
Matt Churchyard
- Getting valid JSON output with xo(1)
Matt Churchyard
- Getting valid JSON output with xo(1)
Richard Perini
- Getting valid JSON output with xo(1)
Stefan Esser
- Getting valid JSON output with xo(1)
Matt Churchyard
- Getting valid JSON output with xo(1)
Phil Shafer
- Getting valid JSON output with xo(1)
Matt Churchyard
- Help needed in Kernel Crypto Example
Aravindhan K
- how to use ftp(1) in batch mode
Wojciech Puchar
- how to use ftp(1) in batch mode
Wojciech Puchar
- how to use ftp(1) in batch mode
Wojciech Puchar
- how to use ftp(1) in batch mode
Jamie Landeg-Jones
- how to use ftp(1) in batch mode
Eugene Grosbein
- how to use ftp(1) in batch mode
Wojciech Puchar
- intelspi: don't leak spibus children on detach
Yuri Pankov
- intelspi: fix "Device leaked IRQ resources"
Yuri Pankov
- intelspi: fix "Device leaked IRQ resources"
Mark Johnston
- Is here way to have 9600+ serial console and see boot0 message?
Lev Serebryakov
- Is here way to have 9600+ serial console and see boot0 message?
Allan Jude
- Is here way to have 9600+ serial console and see boot0 message?
Lev Serebryakov
- Is here way to have 9600+ serial console and see boot0 message?
Jung-uk Kim
- Is here way to have 9600+ serial console and see boot0 message?
Dimitry Andric
- Is here way to have 9600+ serial console and see boot0 message?
Warner Losh
- Is here way to have 9600+ serial console and see boot0 message?
Lev Serebryakov
- Is here way to have 9600+ serial console and see boot0 message?
Lev Serebryakov
- Is here way to have 9600+ serial console and see boot0 message?
Ian Lepore
- Is here way to have 9600+ serial console and see boot0 message?
Lev Serebryakov
- Is here way to have 9600+ serial console and see boot0 message?
Gary Jennejohn
- Is here way to have 9600+ serial console and see boot0 message?
Lev Serebryakov
- Is here way to have 9600+ serial console and see boot0 message?
Craig Leres
- Is here way to have 9600+ serial console and see boot0 message?
Jung-uk Kim
- Is here way to have 9600+ serial console and see boot0 message?
Lev Serebryakov
- Is here way to have 9600+ serial console and see boot0 message?
Lev Serebryakov
- Is there support for Intel Trusted Execution Engine?
Lev Serebryakov
- Is there support for Intel Trusted Execution Engine?
Benjamin Kaduk
- kernel module linking (general, ipfw table, netgraph)
freeuser
- kernel module linking (general, ipfw table, netgraph)
Eugene Grosbein
- kernel module linking (general, ipfw table, netgraph)
Andrey V. Elsukov
- kernel module linking (general, ipfw table, netgraph)
freeuser
- Let's improve splash screen support in vt(4)
Mateusz Piotrowski
- Let's improve splash screen support in vt(4)
Dag-Erling Smørgrav
- Mostly complete set of 4.3 BSD printed (paper) manuals available
Andrew Heybey
- PCI Express card driver load and unload takes too much time ( up to 30 minutes)
Steevan Rodrigues
- pw(8): review for PR 231649, 231653
Yuri Pankov
- Questions about [U]EFI boot
Lev Serebryakov
- Questions about [U]EFI boot
Eric McCorkle
- setting SSLKEYLOGFILE (for HTTPS decryption) does not work
Victor Sudakov
- Sudden grow of memory in "Laundry" state
Robert
- Sudden grow of memory in "Laundry" state
Mark Johnston
- Sudden grow of memory in "Laundry" state
Robert
- Sudden grow of memory in "Laundry" state
Robert
- Sudden grow of memory in "Laundry" state
Mark Johnston
- Sudden grow of memory in "Laundry" state
Robert
- Sudden grow of memory in "Laundry" state
Mark Johnston
- Supermicro AOC-SLG3-2M2 dual M.2 card only identifies one drive
Craig Leres
- Supermicro AOC-SLG3-2M2 dual M.2 card only identifies one drive
michael at fuckner.net
- Supermicro AOC-SLG3-2M2 dual M.2 card only identifies one drive
Craig Leres
- Syslogd less verbose logging with rfc5424
Pavel Timofeev
- Syslogd less verbose logging with rfc5424
Pavel Timofeev
- Tracking CLDR version in collation definitions
Thomas Munro
- Tracking CLDR version in collation definitions
yuripv
- Tracking CLDR version in collation definitions
Konstantin Belousov
- Tracking CLDR version in collation definitions
Thomas Munro
- Tracking CLDR version in collation definitions
Thomas Munro
- Use of msleep after system has reset 'cold' and before SI_SUB_CLOCKS
Shrikanth Kamath
- wanted: old photo of jkh with "dolly"
Michael W. Lucas
Last message date:
Sun Sep 30 23:43:36 UTC 2018
Archived on: Mon Oct 1 02:33:19 UTC 2018
This archive was generated by
Pipermail 0.09 (Mailman edition).