400/800 card

[Sean Bruno]

Hidetoshi Shimokawa wrote:
> try 'fwcontrol -p'.
>
>
>   
Interesting.  I can't discern from this output, which port actually has 
the S400 device connected to it.

That seems to output the following:
=== base register ===
0x03 0x05 0xe3 0xe2 0xc4 0x03 0x10 0x20
Physical_ID:0  R:1  CPS:1
RHB:0  IBR:0  Gap_Count:5
Extended:7 Num_Ports:3
PHY_Speed:7 Delay:2
LCtrl:1 C:1 Jitter:0 Pwr_Class:4
WDIE:0 ISBR:0 CTOI:0 CPSI:0 STOI:0 PEI:0 EAA:1 EMC:1
Max_Legacy_SPD:0 BLINK:1 Bridge:0
Page_Select:1 Port_Select0

=== page 0 port 0 ===
0xf8 0x60 0x3b 0x00 0x00 0x00 0x00 0x00
Astat:3 BStat:3 Ch:1 Con:0 RXOK:0 Dis:0
Negotiated_speed:3 PIE:0 Fault:0 Stanby_fault:0 Disscrm:0 B_Only:0
DC_connected:0 Max_port_speed:3 LPP:1 Cable_speed:3
Connection_unreliable:0 Beta_mode:0
Port_error:0x0
Loop_disable:0 In_standby:0 Hard_disable:0

=== page 0 port 1 ===
0xf8 0x60 0x3b 0x00 0x00 0x00 0x00 0x00
Astat:3 BStat:3 Ch:1 Con:0 RXOK:0 Dis:0
Negotiated_speed:3 PIE:0 Fault:0 Stanby_fault:0 Disscrm:0 B_Only:0
DC_connected:0 Max_port_speed:3 LPP:1 Cable_speed:3
Connection_unreliable:0 Beta_mode:0
Port_error:0x0
Loop_disable:0 In_standby:0 Hard_disable:0

=== page 0 port 2 ===
0xf8 0x60 0x3b 0x00 0x00 0x00 0x00 0x00
Astat:3 BStat:3 Ch:1 Con:0 RXOK:0 Dis:0
Negotiated_speed:3 PIE:0 Fault:0 Stanby_fault:0 Disscrm:0 B_Only:0
DC_connected:0 Max_port_speed:3 LPP:1 Cable_speed:3
Connection_unreliable:0 Beta_mode:0
Port_error:0x0
Loop_disable:0 In_standby:0 Hard_disable:0

=== page 1 ===
0x02 0x00 0x08 0x00 0x28 0x83 0x13 0x04
Compliance:2
Vendor_ID:0x080028
Product_ID:0x831304