Firewire 800/400 card

[Hidetoshi Shimokawa]

Do you have two (S400 only and S800) cards?
In that case you will have two devices (fwohci0 and fwohci1).
If you have only one card and have S400 and S800 ports, you will have
one device and one bus.
Output of devinfo(8) and fwcontrol -t may be helpful.
The line "fwohci0: invalid speed 7 (fixed to 3)." is expected.

Regards,

On Jan 18, 2008 4:58 AM, Sean Bruno <sbruno at miralink.com> wrote:
> I'm curious, I put a 400/800 card into a FreeBSD 6 machine today and I
> assumed that I would see several different "buses" but I only see one
> according to camcontrol.  Should I see one bus per port or per firewire
> controller?
>
> Also, the card I am using displays interesting output on startup, is
> this a h/w bug?
>
>
> fwohci0: <Texas Instruments TSB82AA2> mem
> 0x2a109000-0x2a1097ff,0x2a100000-0x2a103fff irq 17 at device 6.0 on pci0
> fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0x2a109000
> fwohci0: [MPSAFE]
> fwohci0: OHCI version 1.10 (ROM=1)
> fwohci0: No. of Isochronous channels is 4.
> fwohci0: EUI64 00:13:3b:01:00:01:00:58
> fwohci0: invalid speed 7 (fixed to 3).
> fwohci0: Phy 1394a available S800, 3 ports.
> fwohci0: Link S800, max_rec 4096 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
>
>
> Sean
>
> _______________________________________________
> freebsd-firewire at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-firewire
> To unsubscribe, send any mail to "freebsd-firewire-unsubscribe at freebsd.org"
>
>



-- 
/\ Hidetoshi Shimokawa
\/  simokawa at FreeBSD.ORG