Firewire 800/400 card

[Sean Bruno]

I'm curious, I put a 400/800 card into a FreeBSD 6 machine today and I 
assumed that I would see several different "buses" but I only see one 
according to camcontrol.  Should I see one bus per port or per firewire 
controller?

Also, the card I am using displays interesting output on startup, is 
this a h/w bug?


fwohci0: <Texas Instruments TSB82AA2> mem 
0x2a109000-0x2a1097ff,0x2a100000-0x2a103fff irq 17 at device 6.0 on pci0
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0x2a109000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:13:3b:01:00:01:00:58
fwohci0: invalid speed 7 (fixed to 3).
fwohci0: Phy 1394a available S800, 3 ports.
fwohci0: Link S800, max_rec 4096 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0


Sean