TL-WR1043: switch

[Stefan Bethke]

Am 13.12.2011 um 02:39 schrieb Adrian Chadd:

> Hi,
> 
> What's the CPU facing port in this configuration?
> 
> From what I understand, CPU facing port(s) are always the same though,
> right? Since the switch PHY generally has one or two dedicated ports
> marked for the purpose. I just wonder how you're configuring both the
> arge0 side of things and the switch PHY side of things.
> 
> Does the arge0 "phy" map to a specific switch port phy, for general
> configuration and status? Or is it totally separate here (requiring
> configuration of rtl8366rb0portX ?)

There is no PHY connected to arge0, just the switch MAC.  I believe the RTL8366RB configures the CPU port (port 5) through pin strapping on power up.  My code only return the current configuration, but does not allow you to change it.


Stefan

-- 
Stefan Bethke <stb at lassitu.de>   Fon +49 151 14070811