TL-WR1043: switch

[Adrian Chadd]

Hi,

What's the CPU facing port in this configuration?

>From what I understand, CPU facing port(s) are always the same though,
right? Since the switch PHY generally has one or two dedicated ports
marked for the purpose. I just wonder how you're configuring both the
arge0 side of things and the switch PHY side of things.

Does the arge0 "phy" map to a specific switch port phy, for general
configuration and status? Or is it totally separate here (requiring
configuration of rtl8366rb0portX ?)

Thanks,


Adrian

On 12 December 2011 12:37, Stefan Bethke <stb at lassitu.de> wrote:
>
> Am 11.12.2011 um 11:45 schrieb Stefan Bethke:
>
>> Am 11.12.2011 um 01:06 schrieb Stefan Bethke:
>>
>>> Am 05.12.2011 um 00:22 schrieb Stefan Bethke:
>>>
>>>> Limping along…
>>>>
>>>> You can find a first version of a kernel driver at
>>>> http://www.lassitu.de/freebsd/rtl8366rb.c
>>>> http://www.lassitu.de/freebsd/rtl8366rbvar.h
>>>>
>>>> It has no external interface, but it does set up a sensible VLAN config for the TL-WR1043RB.
>>>
>>> Here's a much more complete interim version:
>>> http://www.lassitu.de/freebsd/etherswitch-rtl8366rb.patch
>>
>> I've updated the patch to include commands to set VLAN configuration and membership.
> Further update to the patch: every phy is now on it's own minibus, the PHYs received a tick every second (enabling link status changes to the console), and I've added code to query and print the current media status (more or less lifted from ifconfig).
>
> # kldload rtl8366rb
> rtl8366rb0: <RTL8366RB Ethernet Switch Controller> at addr 0xa8 on iicbus0
> rtl8366rb0: rev. 3
> miibus0: <MII bus> on rtl8366rb0
> ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
> ukphy0: OUI 0x00e04c, model 0x0016, rev. 1
> ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
> miibus1: <MII bus> on rtl8366rb0
> ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
> ukphy1: OUI 0x00e04c, model 0x0016, rev. 1
> ukphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
> miibus2: <MII bus> on rtl8366rb0
> ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
> ukphy2: OUI 0x00e04c, model 0x0016, rev. 1
> ukphy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
> miibus3: <MII bus> on rtl8366rb0
> ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
> ukphy3: OUI 0x00e04c, model 0x0016, rev. 1
> ukphy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
> miibus4: <MII bus> on rtl8366rb0
> ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4
> ukphy4: OUI 0x00e04c, model 0x0016, rev. 1
> ukphy4:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
> etherswitch0: <Switch controller> on rtl8366rb0
> rtl8366rb0port0: link state changed to DOWN
> rtl8366rb0port1: link state changed to DOWN
> rtl8366rb0port2: link state changed to DOWN
> rtl8366rb0port3: link state changed to DOWN
> rtl8366rb0port4: link state changed to DOWN
> rtl8366rb0port0: link state changed to UP
> rtl8366rb0port1: link state changed to UP
>
> # etherswitchcfg
> etherswitch0: Realtek RTL8366RB with 6 ports and 16 VLAN groups
>        port0 vlangroup 1 media Ethernet autoselect (10baseT/UTP <half-duplex>) status active
>        port1 vlangroup 0 media Ethernet autoselect (1000baseT <full-duplex>) status active
>        port2 vlangroup 0 media Ethernet autoselect (none) status no carrier
>        port3 vlangroup 0 media Ethernet autoselect (none) status no carrier
>        port4 vlangroup 0 media Ethernet autoselect (none) status no carrier
>        port5 vlangroup 0 media Ethernet 1000baseT <full-duplex> status active
>        vlangroup0 vlan 1 members 1,2,3,4,5
>        vlangroup1 vlan 2 members 0,5t
>
>
> Port 0 is set to 10baseT half-duplex on the other side of the link, so this is the result of auto negotiation.  I'll add code to also set the media on the switch side soon.
>
>
> Stefan
>
> --
> Stefan Bethke <stb at lassitu.de>   Fon +49 151 14070811
>
>
>
> _______________________________________________
> freebsd-embedded at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-embedded
> To unsubscribe, send any mail to "freebsd-embedded-unsubscribe at freebsd.org"