11.0 -r301815 "kyua test -k /usr/tests/Kyuafile" on rpi2 [armv7-a/cortex-a7]: broken (24) and failing (59) lists
Conrad Meyer
cem at freebsd.org
Mon Jun 13 19:40:27 UTC 2016
I expect it's because:
1. bitstr_size() is just bytes (doesn't round up to sizeof(bitstr_t ==
unsigned long))
2. The userspace version of bit_alloc() uses calloc(bitstr_size(), 1)
(an array of nmemb=bitstr_size() size=bytes, doesn't have to be
'unsigned long' sized or aligned).
3. Various bit_* functions access the result as if it's an array of
'unsigned long', when it was allocated as a single-byte array (no
ulong alignment or size).
4. ARM isn't as happy about unaligned accesses as x86.
I'd make the following change (needs sys/param.h, not compile tested)
and see if it fixes it:
--- sys/bitstring.h (revision 301805)
+++ sys/bitstring.h (working copy)
@@ -119,7 +119,8 @@
static inline bitstr_t *
bit_alloc(int _nbits)
{
- return ((bitstr_t *)calloc(bitstr_size(_nbits), 1));
+ return (calloc(howmany(bitstr_size(_nbits), sizeof(bitstr_t)),
+ sizeof(bitstr_t)));
}
#endif
On Mon, Jun 13, 2016 at 10:49 AM, Alan Somers <asomers at freebsd.org> wrote:
> Please open a bug for the bitstring test failures and assign it to me.
> Also, since I don't have any arm hardware, please provide instructions
> on how to run this code in a VM, or where I can get access to the
> hardware.
>
> -Alan
>
> On Mon, Jun 13, 2016 at 11:29 AM, Mark Millard <markmi at dsl-only.net> wrote:
>> With the newly less strict alignment requirements "kyua test -k /usr/tests/Kyuafile" runs to completion, unlike before.
>>
>>> ===> Summary
>>> Results read from /root/.kyua/store/results.usr_tests.20160613-080302-120731.db
>>> Test cases: 5694 total, 54 skipped, 21 expected failures, 24 broken, 59 failed
>>> Total time: 8723.243s
>>
>>
>> I only list the one line summaries below. Then I list various context details.
>>
>>> ===> Broken tests
>>> lib/msun/cexp_test:main -> broken: Received signal 6 [1.054s]
>>> lib/msun/ctrig_test:main -> broken: Received signal 6 [1.074s]
>>> lib/msun/exponential_test:main -> broken: Received signal 6 [1.045s]
>>> lib/msun/fenv_test:main -> broken: Received signal 6 [1.048s]
>>> lib/msun/fma_test:main -> broken: Received signal 6 [1.080s]
>>> lib/msun/invctrig_test:main -> broken: Received signal 6 [1.091s]
>>> lib/msun/invtrig_test:main -> broken: Received signal 6 [1.086s]
>>> lib/msun/logarithm_test:main -> broken: Received signal 6 [1.054s]
>>> lib/msun/lrint_test:main -> broken: Received signal 6 [1.069s]
>>> lib/msun/nearbyint_test:main -> broken: Received signal 6 [1.066s]
>>> lib/msun/rem_test:main -> broken: Received signal 6 [1.069s]
>>> lib/msun/trig_test:main -> broken: Received signal 6 [1.070s]
>>> sbin/growfs/legacy_test:main -> broken: Reported plan differs from actual executed tests [0.459s]
>>> sys/geom/class/eli/integrity_copy_test:main -> broken: Test case timed out [1200.082s]
>>> sys/geom/class/eli/integrity_hmac_test:main -> broken: Test case timed out [600.138s]
>>> sys/geom/class/eli/onetime_a_test:main -> broken: Test case timed out [600.044s]
>>> sys/sys/bitstring_test:bit_clear -> broken: Test case body timed out [300.032s]
>>> sys/sys/bitstring_test:bit_count -> broken: Premature exit; test case received signal 11 (core dumped) [1.080s]
>>> sys/sys/bitstring_test:bit_ffc -> broken: Premature exit; test case received signal 11 (core dumped) [1.077s]
>>> sys/sys/bitstring_test:bit_ffc_at -> broken: Premature exit; test case received signal 11 (core dumped) [1.081s]
>>> sys/sys/bitstring_test:bit_ffs -> broken: Premature exit; test case received signal 11 (core dumped) [1.082s]
>>> sys/sys/bitstring_test:bit_ffs_at -> broken: Premature exit; test case received signal 11 (core dumped) [1.077s]
>>> sys/sys/bitstring_test:bit_nclear -> broken: Premature exit; test case received signal 11 (core dumped) [1.083s]
>>> sys/sys/bitstring_test:bit_nset -> broken: Premature exit; test case received signal 11 (core dumped) [1.079s]
>>
>>
>>> ===> Failed tests
>>> lib/libc/c063/fstatat_test:fstatat_fd -> failed: /usr/src/contrib/netbsd-tests/lib/libc/c063/t_fstatat.c:74: memcmp(&st1, &st2, sizeof(st1)) == 0 not met [0.
>>> 027s]
>>> lib/libc/nss/gethostby_test:getipnodebyname_getaddrinfo_ipv4 -> failed: /usr/src/lib/libc/tests/nss/gethostby_test.c:1335: run_tests(_hostlist_file, _snapshot
>>> _file, 2, TEST_GETHOSTBYNAME2_GETADDRINFO, 0) == 0 not met [15.315s]
>>> lib/libc/ssp/ssp_test:fgets -> failed: Test case body returned a non-ok exit code, but this is not allowed [0.153s]
>>> lib/libc/ssp/ssp_test:gets -> failed: Test case body returned a non-ok exit code, but this is not allowed [0.158s]
>>> lib/libc/ssp/ssp_test:memcpy -> failed: atf-check failed; see the output of the test for details [0.148s]
>>> lib/libc/ssp/ssp_test:memmove -> failed: atf-check failed; see the output of the test for details [0.147s]
>>> lib/libc/ssp/ssp_test:memset -> failed: atf-check failed; see the output of the test for details [0.147s]
>>> lib/libc/ssp/ssp_test:read -> failed: Test case body returned a non-ok exit code, but this is not allowed [0.154s]
>>> lib/libc/ssp/ssp_test:readlink -> failed: atf-check failed; see the output of the test for details [0.155s]
>>> lib/libc/ssp/ssp_test:snprintf -> failed: atf-check failed; see the output of the test for details [0.149s]
>>> lib/libc/ssp/ssp_test:sprintf -> failed: atf-check failed; see the output of the test for details [0.149s]
>>> lib/libc/ssp/ssp_test:stpcpy -> failed: atf-check failed; see the output of the test for details [0.149s]
>>> lib/libc/ssp/ssp_test:stpncpy -> failed: atf-check failed; see the output of the test for details [0.147s]
>>> lib/libc/ssp/ssp_test:strcat -> failed: atf-check failed; see the output of the test for details [0.147s]
>>> lib/libc/ssp/ssp_test:strcpy -> failed: atf-check failed; see the output of the test for details [0.147s]
>>> lib/libc/ssp/ssp_test:strncat -> failed: atf-check failed; see the output of the test for details [0.147s]
>>> lib/libc/ssp/ssp_test:strncpy -> failed: atf-check failed; see the output of the test for details [0.146s]
>>> lib/libc/ssp/ssp_test:vsnprintf -> failed: atf-check failed; see the output of the test for details [0.150s]
>>> lib/libc/ssp/ssp_test:vsprintf -> failed: atf-check failed; see the output of the test for details [0.148s]
>>> lib/libc/stdio/printbasic_test:int_within_limits -> failed: printf("%tu", (size_t)-1) ==> [18446744073709551615], expected [4294967295]<<NEWLINE>> [0.030s]
>>> lib/libc/stdio/scanfloat_test:infinities_and_nans -> failed: /usr/src/lib/libc/tests/stdio/scanfloat_test.c:191: fetestexcept(FE_INVALID) == 0 not met [0.031
>>> s]
>>> lib/libc/sys/mincore_test:mincore_resid -> failed: /usr/src/contrib/netbsd-tests/lib/libc/sys/t_mincore.c:225: check_residency(addr, npgs) == 0 not met [0.04
>>> 0s]
>>> lib/libc/sys/mincore_test:mincore_shmseg -> failed: /usr/src/contrib/netbsd-tests/lib/libc/sys/t_mincore.c:298: check_residency(addr, npgs) == 0 not met [0.0
>>> 29s]
>>> lib/libc/tls/tls_dynamic_test:t_tls_dynamic -> failed: 15 checks failed; see output for more details [0.035s]
>>> lib/libproc/proc_test:symbol_lookup -> failed: /usr/src/lib/libproc/tests/proc_test.c:116: state != PS_STOP: process has state 4 [0.177s]
>>> lib/libxo/functional_test:test_02__E -> failed: atf-check failed; see the output of the test for details [0.166s]
>>> lib/libxo/functional_test:test_02__H -> failed: atf-check failed; see the output of the test for details [0.168s]
>>> lib/libxo/functional_test:test_02__HIPx -> failed: atf-check failed; see the output of the test for details [0.170s]
>>> lib/libxo/functional_test:test_02__HP -> failed: atf-check failed; see the output of the test for details [0.164s]
>>> lib/libxo/functional_test:test_02__J -> failed: atf-check failed; see the output of the test for details [0.169s]
>>> lib/libxo/functional_test:test_02__JP -> failed: atf-check failed; see the output of the test for details [0.166s]
>>> lib/libxo/functional_test:test_02__T -> failed: atf-check failed; see the output of the test for details [0.168s]
>>> lib/libxo/functional_test:test_02__X -> failed: atf-check failed; see the output of the test for details [0.169s]
>>> lib/libxo/functional_test:test_02__XP -> failed: atf-check failed; see the output of the test for details [0.168s]
>>> lib/msun/conj_test:main -> failed: 9 tests of 42 failed [0.034s]
>>> lib/msun/ldexp_test:ldexp_denormal -> failed: 4 checks failed; see output for more details [0.034s]
>>> local/kyua/model/metadata_test:override_all_with_set_string -> failed: Line 253: disk_space != md.required_disk_space() (16777216.00T != 2.00G) [0.047s]
>>> local/kyua/testers/stacktrace_test:dump__cannot_find_gdb -> failed: testers/stacktrace_test.c:281: atf_utils_grep_file("execvp failed", "stacktrace") not met
>>> [0.611s]
>>> local/kyua/testers/stacktrace_test:dump__gdb_fail -> failed: testers/stacktrace_test.c:294: atf_utils_grep_file("foo", "stacktrace") not met [0.610s]
>>> local/kyua/testers/stacktrace_test:dump__gdb_times_out -> failed: testers/stacktrace_test.c:311: atf_utils_grep_file("foo", "stacktrace") not met [0.614s]
>>> local/kyua/testers/stacktrace_test:dump__integration -> failed: testers/stacktrace_test.c:233: atf_utils_grep_file("#0", "stacktrace") not met [0.613s]
>>> local/kyua/testers/stacktrace_test:dump__ok -> failed: testers/stacktrace_test.c:249: atf_utils_grep_file("frame 1", "stacktrace") not met [0.614s]
>>> local/kyua/testers/stacktrace_test:find_core__found__long -> failed: Core dumped, but no candidates found [0.606s]
>>> local/kyua/testers/stacktrace_test:find_core__found__short -> failed: Core dumped, but no candidates found [0.603s]
>>> local/kyua/testers/tap_parser_test:try_parse_plan__insane -> failed: testers/tap_parser_test.c:135: 'too long' not matched in 'Plan line includes out of range
>>> numbers' [0.032s]
>>> sys/geom/class/eli/resize_test:main -> failed: 15 tests of 27 failed [1.292s]
>>> sys/kern/pipe/pipe_fstat_bug_test:main -> failed: Returned non-success exit status 1 [0.044s]
>>> usr.bin/lastcomm/legacy_test:main -> failed: 4 tests of 6 failed [0.151s]
>>> usr.sbin/rpcbind/addrmerge_test:addrmerge_bindip -> failed: 1 checks failed; see output for more details [0.035s]
>>> usr.sbin/rpcbind/addrmerge_test:addrmerge_bindip_rev -> failed: 1 checks failed; see output for more details [0.035s]
>>> usr.sbin/rpcbind/addrmerge_test:addrmerge_localhost_only -> failed: 1 checks failed; see output for more details [0.034s]
>>> usr.sbin/rpcbind/addrmerge_test:addrmerge_one_addr_on_each_subnet -> failed: 1 checks failed; see output for more details [0.035s]
>>> usr.sbin/rpcbind/addrmerge_test:addrmerge_one_addr_on_each_subnet_rev -> failed: 1 checks failed; see output for more details [0.035s]
>>> usr.sbin/rpcbind/addrmerge_test:addrmerge_point2point -> failed: 1 checks failed; see output for more details [0.035s]
>>> usr.sbin/rpcbind/addrmerge_test:addrmerge_point2point_rev -> failed: 1 checks failed; see output for more details [0.033s]
>>> usr.sbin/rpcbind/addrmerge_test:addrmerge_recvdstaddr -> failed: 1 checks failed; see output for more details [0.035s]
>>> usr.sbin/rpcbind/addrmerge_test:addrmerge_recvdstaddr_rev -> failed: 1 checks failed; see output for more details [0.035s]
>>> usr.sbin/rpcbind/addrmerge_test:addrmerge_singlehomed -> failed: 1 checks failed; see output for more details [0.032s]
>>> usr.sbin/sa/legacy_test:main -> failed: 12 tests of 13 failed [0.340s]
>>
>>
>>
>> Context details:
>>
>>> # uname -apKU
>>> FreeBSD rpi2 11.0-ALPHA3 FreeBSD 11.0-ALPHA3 #0 r301815M: Sat Jun 11 23:43:48 PDT 2016 markmi at FreeBSDx64:/usr/obj/clang/arm.armv6/usr/src/sys/RPI2-NODBG ar
>>> m armv6 1100116 1100116
>>
>> In use for the system build was:
>>
>>> XCFLAGS+= -march=armv7-a -mcpu=cortex-a7
>>> XCXXFLAGS+= -march=armv7-a -mcpu=cortex-a7
>>
>> I do have a few local /usr/src changes/additions, but nearly all are only for powerpc and/or powerpc64 contexts:
>>
>>> # svnlite status /usr/src/
>>> M /usr/src/contrib/llvm/lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp
>>> M /usr/src/lib/csu/powerpc64/Makefile
>>> ? /usr/src/sys/amd64/include/include
>>> ? /usr/src/sys/arm/conf/RPI2-NODBG
>>> ? /usr/src/sys/arm/include/include
>>> M /usr/src/sys/boot/ofw/Makefile.inc
>>> M /usr/src/sys/boot/powerpc/Makefile
>>> M /usr/src/sys/boot/powerpc/Makefile.inc
>>> M /usr/src/sys/boot/uboot/Makefile.inc
>>> M /usr/src/sys/conf/Makefile.powerpc
>>> M /usr/src/sys/conf/kern.mk
>>> M /usr/src/sys/conf/kmod.mk
>>> M /usr/src/sys/dev/cxgb/ulp/tom/cxgb_listen.c
>>> M /usr/src/sys/dev/cxgbe/tom/t4_listen.c
>>> ? /usr/src/sys/powerpc/conf/GENERIC64-NODBG
>>> ? /usr/src/sys/powerpc/conf/GENERIC64vtsc
>>> ? /usr/src/sys/powerpc/conf/GENERIC64vtsc-NODEBUG
>>> ? /usr/src/sys/powerpc/conf/GENERICvtsc
>>> ? /usr/src/sys/powerpc/conf/GENERICvtsc-NODEBUG
>>> ? /usr/src/sys/powerpc/include/include
>>> M /usr/src/sys/powerpc/ofw/ofw_machdep.c
>>> M /usr/src/sys/powerpc/powerpc/exec_machdep.c
>>> ? /usr/src/sys/x86/include/include
>>
>> [The cxbg and cxbge changes just remove redundant declarations that stopped a amd64-gcc based build. But other areas have such issues and I quit trying eliminating such blocks to that tool chain. The include/include's are from something making symbolic links back to the parent include.]
>>
>> The kernel configuration was via:
>>
>>> # more /usr/src/sys/arm/conf/RPI2-NODBG
>>> #
>>> # RPI2 -- Custom configuration for the Raspberry Pi 2
>>> #
>>> # For more information on this file, please read the config(5) manual page,
>>> # and/or the handbook section on Kernel Configuration Files:
>>> #
>>> # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
>>> #
>>> # The handbook is also available locally in /usr/share/doc/handbook
>>> # if you've installed the doc distribution, otherwise always see the
>>> # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
>>> # latest information.
>>> #
>>> # An exhaustive list of options and more detailed explanations of the
>>> # device lines is also present in the ../../conf/NOTES and NOTES files.
>>> # If you are in doubt as to the purpose or necessity of a line, check first
>>> # in NOTES.
>>> #
>>>
>>> ident RPI2-NODBG
>>>
>>> include "RPI2"
>>>
>>> makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
>>> options ALT_BREAK_TO_DEBUGGER
>>> #options VERBOSE_SYSINIT # Enable verbose sysinit messages
>>>
>>> options KDB # Enable kernel debugger support
>>>
>>> # For minimum debugger support (stable branch) use:
>>> #options KDB_TRACE # Print a stack trace for a panic
>>> options DDB # Enable the kernel debugger
>>>
>>> nooptions INVARIANTS # Enable calls of extra sanity checking
>>> nooptions INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
>>> nooptions WITNESS # Enable checks to detect deadlocks and cycles
>>> nooptions WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
>>> nooptions DIAGNOSTIC
>>
>>
>> The armv6 11.0 -r301815 system was cross built from amd64, built using src.conf:
>>
>>> # more ~/src.configs/src.conf.rpi2-clang-bootstrap.amd64-host
>>> TO_TYPE=armv6
>>> #
>>> KERNCONF=RPI2-NODBG
>>> TARGET=arm
>>> .if ${.MAKE.LEVEL} == 0
>>> TARGET_ARCH=${TO_TYPE}
>>> .export TARGET_ARCH
>>> .endif
>>> #
>>> WITH_CROSS_COMPILER=
>>> WITHOUT_SYSTEM_COMPILER=
>>> #
>>> #CPUTYPE=soft
>>> WITH_LIBSOFT=
>>> WITH_LIBCPLUSPLUS=
>>> WITH_BINUTILS_BOOTSTRAP=
>>> WITH_CLANG_BOOTSTRAP=
>>> WITH_CLANG=
>>> WITH_CLANG_IS_CC=
>>> WITH_CLANG_FULL=
>>> WITH_CLANG_EXTRAS=
>>> WITH_LLDB=
>>> #
>>> WITH_BOOT=
>>> WITHOUT_LIB32=
>>> #
>>> WITHOUT_ELFTOOLCHAIN_BOOTSTRAP=
>>> WITHOUT_GCC_BOOTSTRAP=
>>> WITHOUT_GCC=
>>> WITHOUT_GCC_IS_CC=
>>> WITHOUT_GNUCXX=
>>> #
>>> NO_WERROR=
>>> #WERROR=
>>> MALLOC_PRODUCTION=
>>> #
>>> WITH_DEBUG_FILES=
>>> #
>>> XCFLAGS+= -march=armv7-a -mcpu=cortex-a7
>>> XCXXFLAGS+= -march=armv7-a -mcpu=cortex-a7
>>> # There is no XCPPFLAGS but XCPP ets XCFLAGS content.
>>
>> and with the make.conf for the system build being empty:
>>
>>> # more ~/src.configs/make.conf
>>> #
>>
>> ===
>> Mark Millard
>> markmi at dsl-only.net
>>
>> _______________________________________________
>> freebsd-current at freebsd.org mailing list
>> https://lists.freebsd.org/mailman/listinfo/freebsd-current
>> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
More information about the freebsd-current
mailing list