udav: vendor 0x0fe6, product: 0x9700

[Hans Petter Selasky]

On Tuesday 21 June 2011 19:17:13 Luiz Gustavo S. Costa wrote:
> Hi Hans !
> 
> theoretically would only do this, put the id's in the files for the udav.c
> work,
> 
> but was not so, the driver did not work with these entries, simply
> could not allocate a PHY.
> 
> Dmesg:
> ugen0.2: <vendor 0x0fe6> at usbus0
> udav0: <vendor 0x0fe6 USB 2.0 10100M Ethernet Adaptor, class 0/0, rev
> 1.10/1.01, addr 2> on usbus0
> udav0: attaching PHYs failed
> 

Check the miibus code. Maybe the PHY in question is not supported.

--HPS