udav: vendor 0x0fe6, product: 0x9700

[Luiz Gustavo S. Costa]

Hi Hans !

theoretically would only do this, put the id's in the files for the udav.c work,

but was not so, the driver did not work with these entries, simply
could not allocate a PHY.

Dmesg:
ugen0.2: <vendor 0x0fe6> at usbus0
udav0: <vendor 0x0fe6 USB 2.0 10100M Ethernet Adaptor, class 0/0, rev
1.10/1.01, addr 2> on usbus0
udav0: attaching PHYs failed

In OpenBSD working normally.

2011/6/19 Hans Petter Selasky <hselasky at c2i.net>:
> On Friday 17 June 2011 15:46:17 Luiz Gustavo S. Costa wrote:
>> Hi all
>>
>> I was venturing more on the idea of running this adapter, I decided to
>> test on OpenBSD 4.9
>>
>> OpenBSD 4.9 RELEASE is already entry for id 0x8180, equal to FreeBSD
>> 9.0-CURRENT.
>>
>> What I did (see attached diff file) was to do the same, I tried to do
>> in freebsd, add the id  of the new adapter based on 0x8180
>>
>> And everything worked as I expected, I managed to get a MAC address
>> and use the ifconfig output as below:
>>
>> udav0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
>>         lladdr 00:e0:4c:53:44:58
>>         priority: 0
>>         media: Ethernet none
>>         inet6 fe80::2e0:4cff:fe53:4458%udav0 prefixlen 64 scopeid 0x5
>>
>> Do I have to specify the id somewhere else, some input to the PHY?
>>
>> Thanks
>
> Hi,
>
> Your patch has been committed with some modifications:
>
> http://svn.freebsd.org/changeset/base/223288
>
> --HPS
>



-- 
  /\             Luiz Gustavo S. Costa
 /  \            Programmer at BSD Perimeter
/    \ /\/\/\    Visit the pfSense Project
/      \    \ \   http://www.pfsense.org
---------------------------------------------------------------------
BSD da serra carioca, Teresopolis (visite: http://miud.in/Inv)
Contatos: luizgustavo at luizgustavo.pro.br / lgcosta at pfsense.org
Blog: http://www.luizgustavo.pro.br