rpi4 headless experience
Herbert J. Skuhra
herbert at gojira.at
Tue May 19 21:43:10 UTC 2020
On Tue, May 19, 2020 at 03:32:07PM -0500, Dan Mack wrote:
> Just tried the latest FreeBSD on RPI image on my rpi4-4GB system. Here's
> what I experienced in case anyone else is interested:
>
> - Install method - I just dd'd the unxz'd image from the download site
> onto a new microSD card.
>
> - used a serial port connected RPI to another RPI using a ttl to usb cable.
>
> - powered on, freebsd booted up just fine.
>
> root at generic:~ # uname -a ; df -h ; sysctl hw | grep physmem
> FreeBSD generic 13.0-CURRENT FreeBSD 13.0-CURRENT #0 r361019: Thu May 14
> 09:12:43 UTC 2020
> root at releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
>
> Filesystem Size Used Avail Capacity Mounted on
> /dev/ufs/rootfs 29G 2.6G 24G 10% /
> devfs 1.0K 1.0K 0B 100% /dev
> /dev/msdosfs/MSDOSBOOT 50M 25M 25M 50% /boot/msdos
> tmpfs 50M 4.0K 50M 0% /tmp
>
>
> hw.physmem: 973434880
>
> I pluged in a USB connected SSD and it was not recognized on either USB2 or
> USB3 ports.
>
> And the memory size is not reporting the full 4GB as can be seen above.
>
> Ethernet is working without any changes (dhcp kicked in by default) and
> seems to work.
>
> Not sure about the on-board WiFI.
>
> That's it, if anyone knows the status of the USB support or how to get the
> system to see all the memory, let me know :-)
Hmm, I am running r360723 (GENERIC) on my RPi4 and it shows "hw.physmem:
4127662080".
I can confirm that USB (and Wifi) is not working:
usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
simplebus0: <usb at 7e980000> mem 0x7e980000-0x7e98ffff,0x7e00b200-0x7e00b3ff irq 44,45 disabled compat brcm,bcm2708-usb (no driver attached)
usb_needs_explore_all: no devclass
Powerd reports "no cpufreq(4) support". No idea if it runs at full
speed or not.
I have two issues with the ethernet adapter (genet0):
1. Apparently, my RPi4 is sending icmp replies to the wrong destination!?
Ping from laptop to RPi4:
% ping -c 1 192.168.0.9
PING 192.168.0.9 (192.168.0.9) 56(84) bytes of data.
--- 192.168.0.9 ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms
tcpdump on laptop:
23:20:22.244458 IP 192.168.0.2 > 192.168.0.9: ICMP echo request, id 14, seq 1, length 64
23:20:22.244651 IP 192.168.0.9 > 192.168.255.191: ICMP echo reply, id 14, seq 1, length 64
tcpdump on RPi4:
23:20:22.247490 IP 192.168.0.2 > 192.168.0.9: ICMP echo request, id 14, seq 1, length 64
23:20:22.247562 IP 192.168.0.9 > 192.168.0.2: ICMP echo reply, id 14, seq 1, length 64
Ping from RPi4 is OK.
2. IPv6 (accept_rtadv) is not working.
And the RPi does not reboot.
--
Herbert
More information about the freebsd-arm
mailing list