beaglebone black: MMC partition switch failed
jungle Boogie
jungleboogie0 at gmail.com
Tue Apr 18 15:43:00 UTC 2017
On 15 April 2017 at 18:50, jungle boogie <jungleboogie0 at gmail.com> wrote:
> Hi All,
>
> It's been awhile since I've been able to run FreeBSD on my BBB. It was
> failing somewhere, but I didn't have good serial cable to see what was
> happening.
>
> Using the latest freebsd head image:
> FreeBSD-12.0-CURRENT-arm-armv6-BEAGLEBONE-20170413-r316750.img
>
> I'm writing it to my microSD card:
> sudo dd if=FreeBSD-12.0-CURRENT-arm-armv6-BEAGLEBONE-20170413-r316750.img
> of=/dev/sdf bs=8M
> 128+0 records in
> 128+0 records out
> 1073741824 bytes (1.1 GB, 1.0 GiB) copied, 1.01005 s, 1.1 GB/s
>
>
> Putting it in the BB and holding s2 for three seconds as mentioned in the
> FBSD Journal article[0].
>
> Upon doing so, I see this:
> U-Boot SPL 2017.01-rc3 (Apr 13 2017 - 12:30:59)
> Trying to boot from MMC1** First descriptor is NOT a primary desc on 0:1 **
> MMC partition switch failed
> *** Warning - MMC partition switch failed, using default environment
>
> ** Partition 1 not valid on device 0 **
> spl_register_fat_device: fat register err - -1
> spl_load_image_fat: error reading image u-boot.img, err - -1
> MMC partition switch failed
> *** Warning - MMC partition switch failed, using default environment
>
> spl: no partition table found
> SPL: failed to boot from all boot devices
> ### ERROR ### Please RESET the board ###
>
Anyone have recommendations on how to fix this?
More information about the freebsd-arm
mailing list