could not process 'interrupts' property

[Aleksander]

this info is also shown, when you have no interrupt decoding function. For
example, for TI OMAP, the function is in sys/arm/ti/common.c [1]

[1]
http://svnweb.freebsd.org/base/head/sys/arm/ti/common.c?revision=239281&view=markup

On Sun, Apr 28, 2013 at 10:39 PM, Jakob Alvermark <jakob at alvermark.net>wrote:

> Hi!
>
> I got my hands on an Olinuxino A13
> (https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino/)
> It is based on the Allwinner A13, which is a stripped down A10 (no SATA,
> HDMI, only one USB host, fewer UARTs)
>
> Since we have (limited) A10 support in HEAD I thought I would give it a
> try.
> Starting from cubieboard I essentially just removed the second USB host
> and changed UART0 to UART1.
> When it boots I get the results below, "could not process 'interrupts'
> property".
>
> I can't figure out what's wrong, does anyone have a clue?
>
> Jakob
>
>
>
>
>
> U-Boot 2012.10-04259-g832a8e5 (Nov 08 2012 - 06:49:37) Allwinner Technology
>
> CPU:   SUNXI Family
> Board: A13-OLinuXino
> I2C:   ready
> DRAM:  512 MiB
> MMC:   SUNXI SD/MMC: 0
> In:    serial
> Out:   serial
> Err:   serial
> Hit any key to stop autoboot:  0
> sun5i#fatload mmc 0 0x40200000 kernel.bin
> reading kernel.bin
>
> 3800740 bytes read
> sun5i#go 0x40200000
> ## Starting application at 0x40200000 ...
> KDB: debugger backends: ddb
> KDB: current backend: ddb
> Copyright (c) 1992-2013 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 10.0-CURRENT #13 r250014M: Sun Apr 28 16:06:38 CEST 2013
>     root at test10:/home/jakob/a13-gonzo/obj/arm.armv6/usr/src/sys/A13 arm
> FreeBSD clang version 3.3 (trunk 178860) 20130405
> WARNING: WITNESS option enabled, expect reduced performance.
> CPU: Cortex A8-r3 rev 2 (Cortex-A core)
>  Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
>  WB disabled EABT branch prediction enabled
> LoUU:2 LoC:2 LoUIS:1
> Cache level 1:
>  32KB/64B 4-way data cache WT WB Read-Alloc
>  32KB/64B 4-way instruction cache Read-Alloc
> Cache level 2:
>  256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc
> real memory  = 536870912 (512 MB)
> avail memory = 511303680 (487 MB)
> random device not loaded; using insecure entropy
> simplebus0: <Flattened device tree simple bus> on fdtbus0
> simplebus0: timer at 01c20c00: could not process 'interrupts' property
> simplebus0: gpio at 01c20800: could not process 'interrupts' property
> simplebus0: usb at 01c14000: could not process 'interrupts' property
> simplebus0: serial at 01c28400: could not process 'interrupts' property
> aintc0: <A13 AINTC Interrupt Controller> mem 0x1c20400-0x1c207ff on
> simplebus0
> a13_ccm0: <Allwinner Clock Control Module> mem 0x1c20000-0x1c203ff on
> simplebus0
> a13wd0: <Allwinner A13 Watchdog> mem 0x1c20c90-0x1c20c97 on simplebus0
> panic: No usable event timer found!
> KDB: enter: panic
> [ thread pid 0 tid 100000 ]
> Stopped at      kdb_enter+0x4c: ldrb    r15, [r15, r15, ror r15]!
> db>
>
>
> _______________________________________________
> freebsd-arm at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
>



-- 
regards
aleek