amd64/89550: [amd64] sym0: VTOBUS failed (6.0 Release)

[Jan Mikkelsen]

The following reply was made to PR amd64/89550; it has been noted by GNATS.

From: "Jan Mikkelsen" <janm at transactionware.com>
To: <bug-followup at FreeBSD.org>,
	<awallac3 at uiuc.edu>
Cc:  
Subject: Re: amd64/89550: [amd64] sym0: VTOBUS failed (6.0 Release)
Date: Mon, 18 Sep 2006 11:39:42 +1000

 I am seeing this too.
 
 Tyan S2865 motherboard, Athlon X2, 6.1-RELEASE-p5.  Booting from a 
 6.0-RELEASE/i386 CD seems to work fine, at least as far as the fixit shell.
 
 The behaviour below is consistent;  it always dies with "panic: sym: VTOBUS 
 FAILED!" after finding the sym0 controller.
 
 dmesg below.
 
 Thanks,
 
 Jan Mikkelsen
 janm at transactionware.com
 
 
 
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  The Regents of the University of California. All rights reserved.
 FreeBSD 6.1-RELEASE-p5 #0: Tue Sep 12 13:32:17 EST 2006
     root at test.transactionware.com:/work/home/janm/p4/image-freebsd-std-fileserv/work/base-freebsd/work/home/janm/p4/image-freebsd-std-fileserv/FreeBSD/src/sys/TW-SMP
 ACPI APIC Table: <Nvidia AWRDACPI>
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2210.20-MHz K8-class 
 CPU)
   Origin = "AuthenticAMD"  Id = 0x20fb1  Stepping = 1
   Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
   Features2=0x1<SSE3>
   AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
   AMD Features2=0x3<LAHF,CMP>
   Cores per package: 2
 real memory  = 2146304000 (2046 MB)
 avail memory = 2061185024 (1965 MB)
 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
 ioapic0: Changing APIC ID to 2
 ioapic0 <Version 1.1> irqs 0-23 on motherboard
 kbd1 at kbdmux0
 acpi0: <Nvidia AWRDACPI> on motherboard
 acpi_bus_number: can't get _ADR
 acpi_bus_number: can't get _ADR
 acpi_bus_number: can't get _ADR
 acpi_bus_number: can't get _ADR
 acpi0: Power Button (fixed)
 acpi_bus_number: can't get _ADR
 acpi_bus_number: can't get _ADR
 acpi_bus_number: can't get _ADR
 acpi_bus_number: can't get _ADR
 acpi_bus_number: can't get _ADR
 acpi_bus_number: can't get _ADR
 unknown: I/O range not supported
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
 cpu0: <ACPI CPU> on acpi0
 cpu1: <ACPI CPU> on acpi0
 acpi_button0: <Power Button> on acpi0
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pci0: <ACPI PCI bus> on pcib0
 pci0: <memory> at device 0.0 (no driver attached)
 isab0: <PCI-ISA bridge> at device 1.0 on pci0
 isa0: <ISA bus> on isab0
 pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
 ohci0: <OHCI (generic) USB controller> mem 0xfebff000-0xfebfffff irq 21 at 
 device 2.0 on pci0
 ohci0: [GIANT-LOCKED]
 usb0: OHCI version 1.0, legacy support
 usb0: <OHCI (generic) USB controller> on ohci0
 usb0: USB revision 1.0
 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 8 ports with 8 removable, self powered
 ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff irq 22 
 at device 2.1 on pci0
 ehci0: [GIANT-LOCKED]
 usb1: waiting for BIOS to give up control
 usb1: timed out waiting for BIOS
 usb1: EHCI version 1.0
 usb1: companion controller, 4 ports each: usb0
 usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
 usb1: USB revision 2.0
 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub1: 8 ports with 8 removable, self powered
 pci0: <multimedia, audio> at device 4.0 (no driver attached)
 atapci0: <nVidia nForce CK804 UDMA133 controller> port 
 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 6.0 on pci0
 ata0: <ATA channel 0> on atapci0
 ata1: <ATA channel 1> on atapci0
 atapci1: <nVidia nForce CK804 SATA300 controller> port 
 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xcc00-0xcc0f mem 
 0xfebfb000-0xfebfbfff irq 21 at device 7.0 on pci0
 ata2: <ATA channel 0> on atapci1
 ata3: <ATA channel 1> on atapci1
 atapci2: <nVidia nForce CK804 SATA300 controller> port 
 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xb800-0xb80f mem 
 0xfebfa000-0xfebfafff irq 22 at device 8.0 on pci0
 ata4: <ATA channel 0> on atapci2
 ata5: <ATA channel 1> on atapci2
 pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
 pci1: <ACPI PCI bus> on pcib1
 pci2: <display, VGA> at device 5.0 (no driver attached)
 fwohci0: <VIA Fire II (VT6306)> port 0xa800-0xa87f mem 0xfcffe000-0xfcffe7ff 
 irq 18 at device 6.0 on pci1
 fwohci0: OHCI version 1.10 (ROM=1)
 fwohci0: No. of Isochronous channels is 4.
 fwohci0: EUI64 00:e0:81:00:00:26:37:41
 fwohci0: Phy 1394a available S400, 2 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 firewire0: <IEEE1394(FireWire) bus> on fwohci0
 fwe0: <Ethernet over FireWire> on firewire0
 if_fwe0: Fake Ethernet address: 02:e0:81:26:37:41
 fwe0: Ethernet address: 02:e0:81:26:37:41
 fwe0: if_start running deferred for Giant
 sbp0: <SBP-2/SCSI over FireWire> on firewire0
 fwohci0: Initiate bus reset
 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
 firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
 firewire0: bus manager 0 (me)
 sym0: <1010-66> port 0xa400-0xa4ff mem 
 0xfcffd000-0xfcffd3ff,0xfcffa000-0xfcffbfff irq 18 at device 9.0 on pci1
 panic: sym: VTOBUS FAILED!
 
 cpuid = 0
 Uptime: 1s