Unable to resume amd64 machine
Gustau Pérez i Querol
gperez at entel.upc.edu
Tue Jun 26 11:17:58 UTC 2012
Hi,
it seems there was some problem when I posted this one. Sorry if it
shows two times in the mailing list.
I've trying to suspend/resume an amd64 machine. The machine is a
fujitsu S710 laptop running:
FreeBSD 10.0-CURRENT #4 r237339=e61ad3a-dirty: Sat Jun 23
17:12:58 CEST 2012
I did the tests in the following conditions:
- No X loaded. Everything in console. The machine has an Intel video
card, but the i915kms wasn't there.
- When removing modules, I tried in single user mode.
The behavior is basically the machine seems to suspend fine (I see
the power led blinking) but when resuming it freezes hard. I see the
disk spinning for a while and then it stops. I can't ssh to it, I can't
use the keyboard at all so I can issue no command at all.
I've tried stripping down the kernel (everything is out except
if_ath, em and usb stack). No pccard, no sdhci, no sound, no cuse4bsd,
no usb hid devices (I'm using uhidd for hid devices), no acpi_video or
acpi_fujitsu there but the same result.
I tried enabling debug.acpi.resume_beep=1. When doing this, the
laptop beeped like crazy.
With sysctl debug.acpi.suspend_bounce=1, the suspend put the screen
blank, however the machine stayed alive.
With acpi.reset_video I got no result.
I tried using the serial console on the laptop. I saw the suspend
process taking down some usb devices. Resume showed nothing on the
serial console.
Disabling devices in the BIOS (removing wifi, bluetooth, webcam, etc
...) didn't bring me further.
Thanks
--
---------------------------------------------------------------------------
Prou top-posting : http://ca.wikipedia.org/wiki/Top-posting
Stop top-posting : http://en.wikipedia.org/wiki/Posting_style
O O O Gustau Pérez i Querol
O O O Departament d'Enginyeria Telemàtica
O O O Universitat Politècnica de Catalunya
Edifici C3 - Despatx S101-B
UPC Campus Nord UPC
C/ Jordi Girona, 1-3
08034 - Barcelona
More information about the freebsd-acpi
mailing list