mini itx from via - acpi issues on 7.1R

[Nenhum_de_Nos]

On Tue, January 13, 2009 22:00, Nate Lawson wrote:
> Nenhum_de_Nos wrote:
>> I sent this friday to stable@, but nothing as far. I'm trying this one
>> now, hope better luck :)
>>
>> matheus
>>
>> hail,
>>
>> I'm running 7.1R (tried 8.0-CURRENT also) on a via mini itx (dmesg
>> bellow)
>> and if I load acpi module, I have no lan. it appears, I can set IP, even
>> the led would blink when I ping. but no signal of bits on the other pc
>> whatsoever. tcpdump sees nothing in both endpoints. if acpi is not
>> loaded,
>> vr0 works as it should.
>>
>> i really think acpi would help this box, on power purposes, so here I am
>> asking.
>>
>> thanks,
>>
>> matheus
>>
>> ps: should I mail acpi@ with, or instead ?
>
>> pci0: <bridge> at device 17.4 (no driver attached)
>> vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe600-0xe6ff mem
>> 0xe8130000-0xe81300ff irq 15 at device 18.0 on pci0
>> vr0: Quirks: 0x0
>> vr0: Revision: 0x51
>> miibus0: <MII bus> on vr0
>> ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
>> ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>> vr0: Ethernet address: 00:11:85:e3:2a:17
>> vr0: [ITHREAD]
>>
>> vr0 at pci0:0:18:0:	class=0x020000 card=0x01021106 chip=0x30651106 rev=0x51
>> hdr=0x00
>>     vendor     = 'VIA Technologies Inc'
>>     device     = 'VT6102 Rhine II PCI Fast Ethernet Controller||Used by
>> GERICOM in laptop Webengine Advanced'
>>     class      = network
>>     subclass   = ethernet
>
> Maybe it's a PCI irq routing problem.

is there anything I can do ? (you can think of)

thanks,

matheus

-- 
We will call you cygnus,
The God of balance you shall be